jaraeez

Turn xinerama off, & configure each head seperately within "XFdrake" HTH

Yep.. cheers for that. This is also what I have done.. strange. I will double-check to see if the files are executable in Windoze...

Hi John, Thanks for the reply. I will check that once Im at home, but im sure that i have the setting in windoze as detail...

Hi, I have succesfully installed & burnt using k3b. My problem is that when I put it in a Windoze PC the files show up but instead of there names it shows a little icon..?! Im not sure of the correct settings for burning data cd's which can be read by both Linux & Windoze. Anyone... TIA

Well Ive only ever used VMware in Linux. The reason: it works, & works well for my needs. Now that 5.5 has the wireless host capabilities (can give the virtual pc a static) & the sound is no longer choppy I am a very happy person... :D

Have you tried to boot off a windose boot floppy, the do fdisk /mbr assuming you have "fdisk on your floppy, if not you can download it & add it to the floppy. Though in truth you should still be able to boot from any bootable cd regardless of what OS you have installed.. HTH

Hi, Have you checked to see if "cups" services are running? Ive done upgrades before & noticed that the services were disables after my first re-boot. HTH

Well a few things spring to mind... Do you have sshd enabled on PC1? Is there a firewall on PC1? What are the errors you get in "dmesg" after you try to ssh to PC1? Can you post the output for "ifconfig" for both PC's. Which card are you tring to connect to on PC1?

Hi there, I've been using MDK for around one year (never used Linux before that) & I'm now on MDK 10.2 LE 2005 (the best most stable distro I've ever used). Anyway the other day I downloaded Ubuntu 5.10 & decided to give it a try. Well I've played with it for only a couple of days & to be honest I dont like it. Having said that I'm sure if I give it more time it may grow on me. My advise is if you have a spare hard drive then give it ago. Once you've had enough pull the HD out & try it later.. HTH

Hi, My long way around a similar problem was to remove the dvd, then boot, then shutdown, add the dvd & reboot again. Once I did this all was fine. HTH

Hi, Two things I can suggest. First, have you tried "Generic" for the monitors. I found this to work where as if I tried to use the acutal TFT's model names it did not. Secondly I notice that you have the same "BusID" for both monitors, where as I have different ID's for all my monitors. I basically did what you did with regards to the drivers, started in "failsafe" mode then ran "XFdrake" then after setting up all the monitors saved & rebooted. Have you tried it with "Xinerama" disabled to see if you can get both monitors to initialise. HTH

As a matter of interest what are the permissions on your xorg.conf? Heres mine for your reference -rw-r--r-- 1 root root 5524 Sep 30 23:43 /etc/X11/xorg.conf

Hi, Have you thought about deleting the current drivers & manually copying the new drivers over. Also what does your xorg.conf look like & have you checked the /var/log/Xorg.0.log out for any errors. Finally have you checked the Matrox Forums out for any ideas... HTH EDIT: LOL ... just checked the Matrox forum & noticed that you have posted your problem there already..

Hi there, as the saying goes "nothing special" Im running KDE 3.3.2 on MDV 10.2 in twin monitor mode running to seperate desktops & I can't believe how helpful having all that space really is!!

Hi all, can anyone enlighten me a little here... I have a Matrox G200 MMS (Quad Head) which I run with 2 tft's. Both screens work fine (other than the fact that when I run rdesktop the refresh rate is unbearable) when I enable Xinerama. When its disabled the screens initialise but then it just sits there. I have blue backgrounds but no nouse pointer & I the only way to reboot the PC (Mandriva 2005 LE) is to hard boot. here are some details & pls tell me if you need to see any others.. TIA xorg.cong # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config man page for details about the format of # this file. # ********************************************************************** Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse does not work #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer Load "dri" # direct rendering Load "/usr/X11R6/lib/modules/extensions/libglx.a" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1280x1024" HorizSync 31.5-67 VertRefresh 50-60 # Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4) ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection Section "Monitor" Identifier "monitor2" VendorName "Dell" ModelName "Dell 1702FP (Digital)" HorizSync 30.0-80.0 VertRefresh 56.0-60.0 EndSection Section "Monitor" Identifier "monitor3" VendorName "Generic" ModelName "1024x768 @ 60 Hz" HorizSync 31.5-48.5 VertRefresh 50-70 EndSection Section "Monitor" Identifier "monitor4" VendorName "Generic" ModelName "1024x768 @ 60 Hz" HorizSync 31.5-48.5 VertRefresh 50-70 EndSection Section "Device" Identifier "device1" VendorName "Matrox Graphics, Inc." BoardName "Matrox Millennium G200 QuadHead" Driver "mga" Screen 0 BusID "PCI:3:0:0" Option "DPMS" EndSection Section "Device" Identifier "device2" VendorName "Matrox Graphics, Inc." BoardName "Matrox Millennium G200 QuadHead" Driver "mga" Screen 0 BusID "PCI:3:4:0" Option "DPMS" EndSection Section "Device" Identifier "device3" VendorName "Matrox Graphics, Inc." BoardName "Matrox Millennium G200 QuadHead" Driver "mga" Screen 0 BusID "PCI:3:8:0" Option "DPMS" EndSection Section "Device" Identifier "device4" VendorName "Matrox Graphics, Inc." BoardName "Matrox Millennium G200 QuadHead" Driver "mga" Screen 0 BusID "PCI:3:12:0" Option "DPMS" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 16 Subsection "Display" Depth 8 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 15 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 16 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 24 Virtual 1280 1024 EndSubsection EndSection Section "Screen" Identifier "screen2" Device "device2" Monitor "monitor2" DefaultColorDepth 16 Subsection "Display" Depth 8 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 15 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 16 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 24 Virtual 1280 1024 EndSubsection EndSection Section "Screen" Identifier "screen3" Device "device3" Monitor "monitor3" DefaultColorDepth 16 Subsection "Display" Depth 8 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 15 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 16 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 24 Virtual 1280 1024 EndSubsection EndSection Section "Screen" Identifier "screen4" Device "device4" Monitor "monitor4" DefaultColorDepth 16 Subsection "Display" Depth 8 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 15 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 16 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 24 Virtual 1280 1024 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" Screen "screen2" RightOf "screen1" Screen "screen3" RightOf "screen2" Screen "screen4" RightOf "screen3" Option "Xinerama" EndSection Xorg.0.log X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.3-25mdk-i686-up-4GB i686 [ELF] Current Operating System: Linux redhat 2.6.11-6mdk #1 Tue Mar 22 16:04:32 CET 2005 i686 Build Date: 13 September 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 29 22:19:05 2005 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Screen "screen2" (1) (**) | |-->Monitor "monitor2" (**) | |-->Device "device2" (**) |-->Screen "screen3" (2) (**) | |-->Monitor "monitor3" (**) | |-->Device "device3" (**) |-->Screen "screen4" (3) (**) | |-->Monitor "monitor4" (**) | |-->Device "device4" (**) |-->Input Device "Keyboard1" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "gb" (**) XKB: layout: "gb" (**) Option "XkbOptions" "compose:rwin" (**) XKB: options: "compose:rwin" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Mouse1" (**) FontPath set to "unix/:-1" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" (**) Option "Xinerama" (**) Xinerama: enabled (II) Open APM successful (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 Using vt 7 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 1028,010e rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 03 class 06,04,00 hdr 01 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 12 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 12 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,244b card 1028,010e rev 12 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2442 card 1028,010e rev 12 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2443 card 1028,010e rev 12 class 0c,05,00 hdr 00 (II) PCI: 00:1f:4: chip 8086,2444 card 1028,010e rev 12 class 0c,03,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2445 card 1028,010e rev 12 class 04,01,00 hdr 00 (II) PCI: 02:07:0: chip 104c,9066 card 010d,16ec rev 00 class 02,80,00 hdr 00 (II) PCI: 02:08:0: chip 8086,b152 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 02:0c:0: chip 10b7,9200 card 1028,00fe rev 78 class 02,00,00 hdr 00 (II) PCI: 03:00:0: chip 102b,0521 card 102b,dbf9 rev 03 class 03,00,00 hdr 00 (II) PCI: 03:04:0: chip 102b,0521 card 102b,dbf9 rev 03 class 03,80,00 hdr 00 (II) PCI: 03:08:0: chip 102b,0521 card 102b,dbf9 rev 03 class 03,80,00 hdr 00 (II) PCI: 03:0c:0: chip 102b,0521 card 102b,dbf9 rev 03 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,3), BCTRL: 0x000e (VGA_EN is set) (II) Bus 2 I/O range: [0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xfb800000 - 0xfe7fffff (0x3000000) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (2:8:0), (2,3,3), BCTRL: 0x000e (VGA_EN is set) (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xfc000000 - 0xfe7fffff (0x2800000) MX[B] (II) Bus 3 prefetchable memory range: [0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B] (--) PCI:*(3:0:0) Matrox Graphics, Inc. MGA G200 AGP rev 3, Mem @ 0xf7000000/24, 0xfe6fc000/14, 0xfd800000/23, BIOS @ 0x80000000/16 (--) PCI: (3:4:0) Matrox Graphics, Inc. MGA G200 AGP rev 3, Mem @ 0xf6000000/24, 0xfe6f8000/14, 0xfd000000/23, BIOS @ 0xfe700000/16 (--) PCI: (3:8:0) Matrox Graphics, Inc. MGA G200 AGP rev 3, Mem @ 0xf5000000/24, 0xfe6f4000/14, 0xfc800000/23, BIOS @ 0xfe700000/16 (--) PCI: (3:12:0) Matrox Graphics, Inc. MGA G200 AGP rev 3, Mem @ 0xf4000000/24, 0xfe6f0000/14, 0xfc000000/23, BIOS @ 0xfe700000/16 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xf0000000 from 0xf3ffffff to 0xefffffff (II) Active PCI resource ranges: [0] -1 0 0xfbefdc00 - 0xfbefdc7f (0x80) MX[B] [1] -1 0 0xfbec0000 - 0xfbedffff (0x20000) MX[B] [2] -1 0 0xfbefe000 - 0xfbefffff (0x2000) MX[B] [3] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [4] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [5] -1 0 0xfc000000 - 0xfc7fffff (0x800000) MX[B](B) [6] -1 0 0xfe6f0000 - 0xfe6f3fff (0x4000) MX[B](B) [7] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [8] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [9] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[B](B) [10] -1 0 0xfe6f4000 - 0xfe6f7fff (0x4000) MX[B](B) [11] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B) [12] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [13] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [14] -1 0 0xfe6f8000 - 0xfe6fbfff (0x4000) MX[B](B) [15] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B) [16] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) [17] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) [18] -1 0 0xfe6fc000 - 0xfe6fffff (0x4000) MX[B](B) [19] -1 0 0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B) [20] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [21] -1 0 0x0000dc40 - 0x0000dc7f (0x40) IX[B] [22] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [23] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [24] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B] [25] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfbefdc00 - 0xfbefdc7f (0x80) MX[B] [1] -1 0 0xfbec0000 - 0xfbedffff (0x20000) MX[B] [2] -1 0 0xfbefe000 - 0xfbefffff (0x2000) MX[B] [3] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [4] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [5] -1 0 0xfc000000 - 0xfc7fffff (0x800000) MX[B](B) [6] -1 0 0xfe6f0000 - 0xfe6f3fff (0x4000) MX[B](B) [7] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [8] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [9] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[B](B) [10] -1 0 0xfe6f4000 - 0xfe6f7fff (0x4000) MX[B](B) [11] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B) [12] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [13] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [14] -1 0 0xfe6f8000 - 0xfe6fbfff (0x4000) MX[B](B) [15] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B) [16] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) [17] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) [18] -1 0 0xfe6fc000 - 0xfe6fffff (0x4000) MX[B](B) [19] -1 0 0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B) [20] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [21] -1 0 0x0000dc40 - 0x0000dc7f (0x40) IX[B] [22] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [23] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [24] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B] [25] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfbefdc00 - 0xfbefdc7f (0x80) MX[B] [6] -1 0 0xfbec0000 - 0xfbedffff (0x20000) MX[B] [7] -1 0 0xfbefe000 - 0xfbefffff (0x2000) MX[B] [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [9] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [10] -1 0 0xfc000000 - 0xfc7fffff (0x800000) MX[B](B) [11] -1 0 0xfe6f0000 - 0xfe6f3fff (0x4000) MX[B](B) [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [14] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[B](B) [15] -1 0 0xfe6f4000 - 0xfe6f7fff (0x4000) MX[B](B) [16] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B) [17] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [18] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [19] -1 0 0xfe6f8000 - 0xfe6fbfff (0x4000) MX[B](B) [20] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B) [21] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) [22] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) [23] -1 0 0xfe6fc000 - 0xfe6fffff (0x4000) MX[B](B) [24] -1 0 0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B) [25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [27] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [28] -1 0 0x0000dc40 - 0x0000dc7f (0x40) IX[B] [29] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [30] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [31] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B] [32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [33] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "v4l" (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o (II) Module v4l: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.0.1 ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.8.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "/usr/X11R6/lib/modules/extensions/libglx.a" (glx) (WW) LoadModule: given non-canonical module name "/usr/X11R6/lib/modules/extensions/libglx.a" (II) Reloading /usr/X11R6/lib/modules/extensions/libglx.a (II) UnloadModule: "glx" (EE) Failed to load module "/usr/X11R6/lib/modules/extensions/libglx.a" (once-only module, 136033867) (II) LoadModule: "mga" (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o (II) Module mga: vendor="Matrox Graphics Inc. - Release v4.2.0" compiled for 6.8.2, module version = 1.1.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "keyboard" (II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o (II) Module keyboard: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) v4l driver for Video4Linux (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag200 SE PCI, mgag400, mgag550 (II) Primary Device is: PCI 03:00:0 (--) Chipset mgag200 found (--) Chipset mgag200 found (--) Chipset mgag200 found (--) Chipset mgag200 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfbefdc00 - 0xfbefdc7f (0x80) MX[B] [6] -1 0 0xfbec0000 - 0xfbedffff (0x20000) MX[B] [7] -1 0 0xfbefe000 - 0xfbefffff (0x2000) MX[B] [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [9] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [10] -1 0 0xfc000000 - 0xfc7fffff (0x800000) MX[B](B) [11] -1 0 0xfe6f0000 - 0xfe6f3fff (0x4000) MX[B](B) [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [14] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[B](B) [15] -1 0 0xfe6f4000 - 0xfe6f7fff (0x4000) MX[B](B) [16] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B) 1;17] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [18] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [19] -1 0 0xfe6f8000 - 0xfe6fbfff (0x4000) MX[B](B) [20] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B) [21] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) [22] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) [23] -1 0 0xfe6fc000 - 0xfe6fffff (0x4000) MX[B](B) [24] -1 0 0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B) [25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [27] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [28] -1 0 0x0000dc40 - 0x0000dc7f (0x40) IX[B] [29] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [30] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [31] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B] [32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [33] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfbefdc00 - 0xfbefdc7f (0x80) MX[B] [6] -1 0 0xfbec0000 - 0xfbedffff (0x20000) MX[B] [7] -1 0 0xfbefe000 - 0xfbefffff (0x2000) MX[B] [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [9] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [10] -1 0 0xfc000000 - 0xfc7fffff (0x800000) MX[B](B) [11] -1 0 0xfe6f0000 - 0xfe6f3fff (0x4000) MX[B](B) [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [14] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[B](B) [15] -1 0 0xfe6f4000 - 0xfe6f7fff (0x4000) MX[B](B) [16] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B) [17] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [18] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [19] -1 0 0xfe6f8000 - 0xfe6fbfff (0x4000) MX[B](B) [20] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B) [21] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) [22] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) [23] -1 0 0xfe6fc000 - 0xfe6fffff (0x4000) MX[B](B) [24] -1 0 0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B) [25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [27] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [28] -1 0 0x0000dc40 - 0x0000dc7f (0x40) IX[B] [29] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [30] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [31] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B] [32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [33] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfbefdc00 - 0xfbefdc7f (0x80) MX[B] [6] -1 0 0xfbec0000 - 0xfbedffff (0x20000) MX[B] [7] -1 0 0xfbefe000 - 0xfbefffff (0x2000) MX[B] [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [9] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [10] -1 0 0xfc000000 - 0xfc7fffff (0x800000) MX[B](B) [11] -1 0 0xfe6f0000 - 0xfe6f3fff (0x4000) MX[B](B) [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [14] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[B](B) [15] -1 0 0xfe6f4000 - 0xfe6f7fff (0x4000) MX[B](B) [16] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B) [17] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [18] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [19] -1 0 0xfe6f8000 - 0xfe6fbfff (0x4000) MX[B](B) [20] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B) [21] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) [22] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) [23] -1 0 0xfe6fc000 - 0xfe6fffff (0x4000) MX[B](B) [24] -1 0 0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B) [25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [27] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [28] -1 0 0x0000dc40 - 0x0000dc7f (0x40) IX[B] [29] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [30] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [31] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B] [32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [33] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfbefdc00 - 0xfbefdc7f (0x80) MX[B] [6] -1 0 0xfbec0000 - 0xfbedffff (0x20000) MX[B] [7] -1 0 0xfbefe000 - 0xfbefffff (0x2000) MX[B] [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [9] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [10] -1 0 0xfc000000 - 0xfc7fffff (0x800000) MX[B](B) [11] -1 0 0xfe6f0000 - 0xfe6f3fff (0x4000) MX[B](B) [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [14] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[B](B) [15] -1 0 0xfe6f4000 - 0xfe6f7fff (0x4000) MX[B](B) [16] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B) [17] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [18] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [19] -1 0 0xfe6f8000 - 0xfe6fbfff (0x4000) MX[B](B) [20] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B) [21] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) [22] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) [23] -1 0 0xfe6fc000 - 0xfe6fffff (0x4000) MX[B](B) [24] -1 0 0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B) [25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [27] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [28] -1 0 0x0000dc40 - 0x0000dc7f (0x40) IX[B] [29] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [30] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [31] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B] [32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [33] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfbefdc00 - 0xfbefdc7f (0x80) MX[B] [6] -1 0 0xfbec0000 - 0xfbedffff (0x20000) MX[B] [7] -1 0 0xfbefe000 - 0xfbefffff (0x2000) MX[B] [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O [9] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [10] -1 0 0xfc000000 - 0xfc7fffff (0x800000) MX[B](B) [11] -1 0 0xfe6f0000 - 0xfe6f3fff (0x4000) MX[B](B) [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [14] -1 0 0xfc800000 - 0xfcffffff (0x800000) MX[B](B) [15] -1 0 0xfe6f4000 - 0xfe6f7fff (0x4000) MX[B](B) [16] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B](B) [17] -1 0 0xfe700000 - 0xfe70ffff (0x10000) MX[B](B) [18] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [19] -1 0 0xfe6f8000 - 0xfe6fbfff (0x4000) MX[B](B) [20] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B) [21] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) [22] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) [23] -1 0 0xfe6fc000 - 0xfe6fffff (0x4000) MX[B](B) [24] -1 0 0xf7000000 - 0xf7ffffff (0x1000000) MX[B](B) [25] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [26] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [27] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [28] 1 0 0x000a0000 - 0x000affff (0x10000) MS[B] [29] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [30] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [31] 2 0 0x000a0000 - 0x000affff (0x10000) MS[B] [32] 2 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [33] 2 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [34] 3 0 0x000a0000 - 0x000affff (0x10000) MS[B] [35] 3 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [36] 3 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [38] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [39] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B] [40] -1 0 0x0000dc40 - 0x0000dc7f (0x40) IX[B] [41] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [42] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [43] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B] [44] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [45] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [46] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [47] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] [48] 1 0 0x000003b0 - 0x000003bb (0xc) IS[B] [49] 1 0 0x000003c0 - 0x000003df (0x20) IS[B] [50] 2 0 0x000003b0 - 0x000003bb (0xc) IS[B] [51] 2 0 0x000003c0 - 0x000003df (0x20) IS[B] [52] 3 0 0x000003b0 - 0x000003bb (0xc) IS[B] [53] 3 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Setting vga for screen 1. (II) Setting vga for screen 2. (II) Setting vga for screen 3. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (--) MGA(0): Chipset: "mgag200" (II) Loading sub module "mga_hal" (II) LoadModule: "mga_hal" (II) Loading /usr/X11R6/lib/modules/drivers/mga_hal_drv.o (II) Module mga_hal: vendor="Matrox Graphics Inc. - Release v4.2.0" compiled for 6.8.2, module version = 4.2.0 ABI class: X.Org Video Driver, version 0.7 (==) MGA(0): Matrox HAL module used (**) MGA(0): Depth 16, (--) framebuffer bpp 16 (==) MGA(0): RGB weight 565 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) MGA(0): Initializing int10 (II) MGA(0): Primary V_BIOS segment is: 0xc000 (==) MGA(0): Using AGP 1x mode (--) MGA(0): Linear framebuffer at 0xF7000000 (--) MGA(0): MMIO registers at 0xFE6FC000 (--) MGA(0): Pseudo-DMA transfer window at 0xFD800000 (--) MGA(0): BIOS at 0x80000000 (II) Truncating PCI BIOS Length to 32768 (--) MGA(0): Video BIOS info block at offset 0x07D00 (--) MGA(0): Found and verified enhanced Video BIOS info block (II) MGA(0): MGABios.RamdacType = 0x0 (II) MGA(0): Splitting WC range: base: 0xf7000000, size: 0x2000000 (==) MGA(0): Write-combining range (0xf8000000,0x1000000) (==) MGA(0): Write-combining range (0xf7000000,0x2000000) (==) MGA(0): Write-combining range (0xf7000000,0x800000) (--) MGA(0): VideoRAM: 8192 kByte (==) MGA(0): Write-combining range (0xf7000000,0x800000) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (==) MGA(0): Write-combining range (0xf7000000,0x800000) (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) MGA(0): initializing int10 (II) MGA(0): Primary V_BIOS segment is: 0xc000 (II) MGA(0): VESA BIOS detected (II) MGA(0): VESA VBE Version 3.0 (II) MGA(0): VESA VBE Total Mem: 16384 kB (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc. (II) MGA(0): VESA VBE OEM Software Rev: 3.3 (II) MGA(0): VESA VBE OEM Vendor: Matrox (II) MGA(0): VESA VBE OEM Product: MGA-G200 (II) MGA(0): VESA VBE OEM Product Rev: 00 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) MGA(0): VESA VBE DDC supported (II) MGA(0): VESA VBE DDC Level 2 (II) MGA(0): VESA VBE DDC transfer in appr. 1 sec. (II) MGA(0): VESA VBE DDC read successfully (II) MGA(0): VBE DDC Monitor info: 0x8626510 (II) MGA(0): Manufacturer: TEO Model: 6770 Serial#: 2816 (II) MGA(0): Year: 2004 Week: 36 (II) MGA(0): EDID Version: 1.3 (II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) MGA(0): Sync: Separate CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen (II) MGA(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27 (II) MGA(0): Gamma: 2.20 (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) MGA(0): First detailed timing is preferred mode (II) MGA(0): redX: 0.651 redY: 0.332 greenX: 0.276 greenY: 0.629 (II) MGA(0): blueX: 0.141 blueY: 0.054 whiteX: 0.310 whiteY: 0.329 (II) MGA(0): Supported VESA Video Modes: (II) MGA(0): 720x400@70Hz (II) MGA(0): 640x480@60Hz (II) MGA(0): 640x480@67Hz (II) MGA(0): 640x480@72Hz (II) MGA(0): 640x480@75Hz (II) MGA(0): 800x600@56Hz (II) MGA(0): 800x600@60Hz (II) MGA(0): 800x600@72Hz (II) MGA(0): 800x600@75Hz (II) MGA(0): 832x624@75Hz (II) MGA(0): 1024x768@60Hz (II) MGA(0): 1024x768@70Hz (II) MGA(0): 1024x768@75Hz (II) MGA(0): 1280x1024@75Hz (II) MGA(0): Manufacturer's mask: 0 (II) MGA(0): Supported Future Video Modes: (II) MGA(0): #0: hsize: 1152 vsize 864 refresh: 60 vid: 16497 (II) MGA(0): #1: hsize: 1152 vsize 864 refresh: 70 vid: 19057 (II) MGA(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) MGA(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) MGA(0): #4: hsize: 1280 vsize 960 refresh: 70 vid: 19073 (II) MGA(0): #5: hsize: 1280 vsize 960 refresh: 75 vid: 20353 (II) MGA(0): #6: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) MGA(0): Supported additional Video Mode: (II) MGA(0): clock: 108.0 MHz Image Size: 338 x 270 mm (II) MGA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) MGA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) MGA(0): Ranges: V min: 49 V max: 75 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz (II) MGA(0): Monitor name: TEO TL766 (II) MGA(0): Serial No: R94CP02816 (II) MGA(0): end of VBE DDC Monitor info (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) (==) MGA(0): Min pixel clock is 12 MHz (==) MGA(0): Max pixel clock is 250 MHz (II) MGA(0): monitor1: Using hsync range of 31.50-67.00 kHz (II) MGA(0): monitor1: Using vrefresh range of 50.00-60.00 Hz (II) MGA(0): Clock range: 12.00 to 250.00 MHz (II) MGA(0): Not using mode "768x576" (vrefresh out of range) (II) MGA(0): Not using mode "768x576" (vrefresh out of range) (II) MGA(0): Not using default mode "640x350" (vrefresh out of range) (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x400" (vrefresh out of range) (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "720x400" (vrefresh out of range) (II) MGA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x480" (vrefresh out of range) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x480" (vrefresh out of range) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x480" (vrefresh out of range) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "800x600" (vrefresh out of range) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "800x600" (vrefresh out of range) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "800x600" (vrefresh out of range) (II) MGA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1024x768" (vrefresh out of range) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1024x768" (vrefresh out of range) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1024x768" (hsync out of range) (II) MGA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1152x864" (vrefresh out of range) (II) MGA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1280x960" (hsync out of range) (II) MGA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) MGA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1600x1200" (width too large for virtu Solved this & now have 2 seperate sessions... cool.. Anyway I solved this after disabling the "dkms" service (I had a nvidia card before the matrox)

Hi, I've just come across a Matrox G2 MMS complete with a dongles & would like to try it in Mandriva LE 2005. I've played with it in WinDoze & it was an interesting experience, but my preference is Mandriva. My question: has anyone or is anyone running this card in Mandriva & if so how is it? any gotcha's? I noticed on Matrox website that they have beta drivers for Linux. Any feed back will be much appreciated. btw im running KDE 3.3.2 TIA

Hi all, I wonder if someone could help me with creating a script which will backup my .Mail folder & another non-hidden folder, then ftp it within my lan to another pc (ftp server - XP). I would like to automate this via say 'cron' to carry out the tack every night. Ive STF & googled, but its left me a little confused ( I have downloaded 'ncftp' & will have a little read of the man pages).. TIA EDIT: Ok I've managed to create the above request. Here's what I did for anyone in a similair position. I installed ncftp-3.1.8-1mdk.i586.rpm then created the following script #!/bin/sh DATETMP=`date +%Y-%m-%d-%H-%M-%S` cd /home/user1 tar czf /home/user1/backup.tar-$DATETMP.gz \ /home/user1/.Mail \ /home/user1/documents \ ncftpput -u username -p password -V -DD ftp.name.com / /home/user1/mail-backup.tar-$DATETMP.gz then I added this to cron. I have to add that this is not secure as the username & password will be sent over cleartext, & the file will reside on your PC. My situation is that I am protected by a hardware firewall & both PC's are on the lan (local & DMZ) so I'm not worried instance. HTH

Hi, Ive installed openssh server & client on a MDK 2005 LE box. All works fine internally (LAN), I can ssh into the MDK box & logon etc... I have a smoothwall firewall & have port forwarded my DYNS to the MDK box (ive also forwarded webmin to the same box with no success ethier!!). I then use putty with the DNS address & I can see that it resolves to my current IP address, then then I recieve an error stating that the connection was "reset by peer" Ive checked my firewall logs & noticed this sshd fatal: Timeout before authentication for 192.168.X.X . I have also STF & added sshd:ALL to the hosts.allow file, checked the sshd_config file (don't really know what im looking for here but it looked alright from a logical point of view :-) ) Im now at a loss as to what to do or check & any ideas will be gratefully accepted.. & as stated ssh'ing from a LAN pc works fine.. My security setting for MDK are set to "standard" TIA

Cheers ppl for the replies. Yeah I thought it wasn't possible but not %100 sure. I RDP'ed into a WinXP I have on the Lan & from there ran NMap... & no sshd or webmin ports opened... so I guess I will have to get someone to start the daemon from home.... thanks again for the replies

Yeah cheers for that. I don't have NMap on my firewall. I've got a feeling that i've not started the sshd on my LE. So my question is can I start it remotely?

Hi all, I wonder if anyone can help with this problem or if it is at all possible. I have a Mandriva LE 2005 PC behind a firewall (Smoothwall) at home (UK) Im in Australia at the mo' & need to ssh into my LE 2005. So far how im doing this is by ssh'ing into my firewall, then from there trying to ssh into the LE. My problem is that Im not sure ( :-( ) if I have started the sshd on the LE ... Is there a way to start it or check to see if I have indeed started it? Ive googled with no luck TIA

No problem...

Hi there, Ive been using an USR805416 for over a year now with no problems whatsoever. It runs stable & with the appropiate Access point will run at 125mb. The driver installation is a breeze with Driverloader. I'm now on 2005 LE & all is running fine. Check the links out.. HTH

Hi, just my 2 pence. I have Mandriva 2005 (upgraded) & a USR pci wireless card (chipset Texas Instruments ACX 111) All works flawlessly. I d/led Driverloader a rpm package from this website & the install is very easy indeed. The catch is that they charge for their driver UNLESS you own a ACX 111 chipset, in which case the driver is free... worth a thought maybe...

What Laptop do you have? Make & model