sud_crow

Finally! LFS 5.0 has been released today! Here is the official announcement: wooohoooo!, now i only need some pkg management for it! EDIT forgot the link: www.linuxfromscratch.org

If i had two monitors and a spare video card, i might be real usufull... but as i dont: I dont think you will be able to make applications to maximize to one entire desktop (in one monitor) while having them in the "simulate-one-huge-monitor" function (the panel sharing the two screens). At least in virtual mode, i cant make maximization to the virtual display. Just to recomfort you; i envy you.

No one knows about it?? i saw it in the LFS page, but cant find it....

Im looking for a program that made sources out of RPM pkgs... i saw it once when i was building my LFS and i cant find it now... does anyone know where it is??

mmmm..... what about Gnome Control Center??

All right, got it working... kinda... its throwing some wird voltage settings... when i run "sensors" everything seems ok, but the desktlet shows 9volts where it should display 11.95v (as the sensors command) i will check on this and ask for help if i cant get it working. thanks!

Ok, done. Guess i will have to restart to see if its working. Will update later Thanks!!!

oooops.... [crow@archcrow crow]$ sensors Could not locate or open config file! tryed root just in case: [root@archcrow crow]# sensors Could not locate or open config file! looked for it: [root@archcrow crow]# locate sensors.conf /usr/etc/lm_sensors/sensors.conf /usr/etc/lm_sensors/sensors.conf.pacsave /usr/man/man5/sensors.conf.5.gz then run: [root@archcrow crow]# modprobe i2c-proc [root@archcrow crow]# sensors -c /usr/etc/lm_sensors/sensors.conf No sensors found! so... whats going on?? [/code]

Im trying lm_sensors desklet, but cant get it working, it just says searching sensors or something like that, and never finds anything.... yes i have lm_sensors and i2c.

just to notice: im not really flaming, it was a humorous comment thats why i got it between the <>. but i asked something involved with the thread i think, i asked if they are going to update the ISOs or we will have to download the updates after the 3cds set with all the bugs. isnt that a "legal question"??

Anyone knows if they are going to release an updated ISOs set for download?? <flame> Crap, i already had this kinda of upsets with 9.1, this is a freakin deja vú! I wont download 400mb in updates Mandrake.. are you hearing me?? i wont! </flame>

Its Czech. http://www.czech.cz/index.php?section=1&menu=8 I dont know, but i dont think that would be quite right... Crap! whats this a 9.1 replay? this version is full of bugs too?? again?? mmmmm....

mmmm, yes i noticed that too... hope they dont do bad things with my email. :roll: anyway, someone should warn Mandrake Soft, and so, MDK would "ask" them to say they are not affiliated with MDK Soft in any way...

I know something... it throws and error while signing in. Hope its not some kind of fake thingy to get data.

:lol: you are welcome :lol: what firebird are you using?? 0.7.1?? if so... how much better it got from 0.6?

I had those issues with 1.4 but when typing not when clicking. What i was told to do was to disable "Find text as you type in a web page" in the Keyboard Navigation over the Advanced tab in the Preferences. Hope it helps, good luck-

Ok, problem solved. Anyway i will detail just to help future .....whatever. Here i go: I have a Wisecom Accelerator Pro 56k Its a ISA modem, and its quite good. In windows, it says COM 3, and IRQ 11, dont know the DMA (if it uses one) And worked without any problems, no resource conflicts or any other issues. But in Linux works in COM1 (ttyS0), what i did to make it work? When i booted to Linux, the modem couldnt be found by the dialer, this means it didnt found it in any port from com1 to com3 (com4 for some reason is disabled) So i knew it had something to do with IRQs or COMs, then i started looking at the BIOS and seted the IRQ 11 exclusively for ISA (there is the option), this didnt work, and i tryed other IRQs and added DMAs, wouldnt work either.... then chequing i found that the serial ports where using COM1 and COM2 but it didnt sayd it anywhere, i just realised, it just showed a default address and IRQ, then as i dont have actually any serial device i just switched them off. I still have to try if i change the address what happens. I have a CUV4X motherboard by the way. Note: just did this in case someone runs the same problem, as leaving the thread empty wouldnt help. thanks for the hand Ixthusdan.

Short story: I was setting up Win98 for my brother, installed the Sygate Firewall Pro 5, and i was configuring it when it froze, this was a win98se fresh install... is this normal ? ;) hehehehe. Anyway, the problem is that when i touched the reboot button in the Case, the PC should have (?) rebooted, but it didnt, the monitor LED was blinking while the CPU and HD lights where "doing something". So i went again with the case button. This time booted, but the BIOS Setup was set back to all default values. So i lost the personal configuration, where i seted up the Modem IRQ, DMA and other stuff.... When i go to windows, it says COM 3, but it isnt working in thatone, and before was on COM 1 (in Linux, dont remember in windows) but its not working either, it says modem not found. im using wvdial. dont have KPPP. any suggestions??? I NEED INTERNET!!!

uhmmm.... i thought it was mozilla -composer but, it wasnt! then, i tryed this: mozilla -editor and worked... im with Moz 1.4.1 dunno if works for 1.5

Hey james... well when you say yesterday, as your post is from 16th October, then its 15, and as i posted it at 6am October, i think it was just in time! :mrgreen: Anyway, comment a bit on whats going on with it?? did you had any prorblems with it? (bookmarks, settings, plugins) Some good news?? faster?? better??

Mozilla 1.5 Final Released!! Thats it, they did it today! Here is the Whats New. http://www.mozilla.org/releases/mozilla1.5...README.html#new For all Contents on Mozilla 1.5: http://www.mozilla.org/releases/mozilla1.5/ This is the stuff i liked best (about the whats new) 1) Mozilla now includes a spellchecker for MailNews and Composer. 2) Improvements to tabbed browsing including: * Tabs are now replaced when a bookmark group is loaded. This can be changed to the old "append" behavior in the Tabbed browsing preferences. * Back and Forward navigation for tabbed browsing and bookmark groups has been improved. Users can now use the back button after loading a bookmark group to restore the previous set of tabs. * Closing a window with multiple tabs now prompts the user with a confirmation dialog (which can be disabled for future close operations.) 3) Mozilla has improved performance, stability, standards support and web compatibility. Im going to get it right now... or maybe ill wait until Arch has the pkgs.

I dont think they are demos, but older versions, as you see, versions are not specified, and the only one with a version number is CrossOver Office, wich is v2 Just a thought

HI, first you should locate where pygtk 2.0 is installed wich i assume you do coz youd dindt ask. so here we go for the variable: in command line: $ export PYTHONPATH="the/location/to/pygtk2" thats a temp way, so if you log out it will be lost, to have it at start time, copy that line to your ~/.bashrc file. just in case, you could use "locate pygtk" to find where it is, also, as root run updatedb before doing this, just in case! good luck

Hey, i had more-or-less the same thing with KNewsTicler, its pretty stupid answer but wont hurt to try :lol: just launch MCC and re-register web files with Mozilla... For some reason it just fixed it with the KNewTicler, i was getting Konqueror Open instead of Mozilla. Whats better in Thunderbird than in Mozillas Mail app?? apart from lightweight so i can think in switching...

Today almost everything can be done from GUI, for bad or good. But its always good to know what the GUI does, and thats what william just told you. The MCC just edits that file, remember it, i used fluxbox until a week ago, when i switched to XFce4, i found editing $HOME/.fluxbox/menu was the easiest way of changing something in the right click menu, you dont have to wait until MCC loads neither go through all the clicking. anyway, its the fast but not-so-easy way of doing it! hope you find it usufull soon. note: $HOME = /home/youruser/ is a defined variable in all systems (unless you change it)