Jump to content
Sign in to follow this  
zibi1981

problem occurring when booting Mandriva Free 2007

Recommended Posts

I didn't know where to post description of my problem, but it first emerged after installing and booting my Mandriva Free 2007, so I decided to post it here.

 

Well, it looks something went wrong in the installation process, althought the process itself ended without bigger problems. Then, when I did boot for the first time I saw it ending on

 

Setting hostname localhost : [ OK ]

 

Nothing was happening. I only saw glittering cursor. My first thought was something did go wrong in the installation process, but then it came in that Mandriva have started after another "hard" restart. And now I have about fifty-fifty chances of successful boot, maybe even less. Every time I'm pressing power on or restart button, I wonder whether it will start without a problem, or would it end on the "setting hostname localhost" stage.

 

Anyone have an idea what's going on? :unsure:

Share this post


Link to post
Share on other sites

I get this too, sometimes after a few reboots I am useally good to go. I have no idea what causes it. I happens with all kernel on Mandriva >2.6.16 but older kernels are not affected.

 

Maybe I can make a bug report and you can vote for it or vice versa ( I prefer the latter, saves me the trouble of writing one :P ). I haven't found other bug reports, though I know that other people testing 2007 during the cooker fase were experiencing the same.

 

http://qa.mandriva.com/

 

There is one thing which I thibk might cause it, do you have other linux installs? Sometimes after a few resets I get something like "mount superblock in the future blablabla...... :huh: "

 

It's pretty annoying, I agree.

 

What your hardware?

 

I remember I have the 2.6.17-mm kernel installed too and it always booted without hanging, than I upgraded the regular kernel and now the mm kernel hangs too sometimes

 

lol googling for : "Setting hostname localhost : [ OK ] hangs at boot" first hit is this board :lol2:

Share this post


Link to post
Share on other sites

Trying NOT to post a "me too" message, I do want to say that I had the same problem. I thought it was my system/hardware ... but simply installing a new kernel (2.6.17.13-mm-desktop-3mdv in my case) has solved the problem.

 

You might want to try downloading/installing a new or different kernel.

 

Also, check that you DO NOT have a smp (multiple core) kernel if you don't have a multi-core processor. Others with more knowledge on this are welcome to jump in ... but it seems to me that when I was having the halt problem I had a SMP kernel. Funny part of this is that I don't recall ever installing such a beast.

Share this post


Link to post
Share on other sites
Guest Trex78

Hello,

 

I have (Had ? ) the same problem : install OK, but boot freezes about 3 times out of 4, after the "Setting hostname" message.

Had a look at http://qa.mandriva.com/ as ffi suggested, and found 2 reports for this kind of problem.

As this seems related with USB devices support, I swapped my USB optical mouse for an old PS/2 non-optical.

 

And it works ! :D

Booted successfully about 20 times, only problem beeing that at first, it stopped after "Starting HAL service" message, and opened the CD tray :mellow:

I finally inserted the install DVD inside, hit enter, and the startup completed. It probably had to load some module to manage the PS/2 mouse.

 

After that, all my boots are successful, even with the USB mouse connected to the PS/2 port through an adapter.

 

Well, if you have USB devices connected, this is worth a try. Hope this helps.

Share this post


Link to post
Share on other sites

I suggest to browse in the logs (/var/log/messages for starters) to see whether these provide any clues where exactly this fails. The (new) parallel starting of services in 2007 makes it less than obvious what follows what. There is lots of detail in 'messages'...

Share this post


Link to post
Share on other sites
I suggest to browse in the logs (/var/log/messages for starters) to see whether these provide any clues where exactly this fails. The (new) parallel starting of services in 2007 makes it less than obvious what follows what. There is lots of detail in 'messages'...

 

I just had 2 hangup but the system log is completely blank for that time :o The log ends with last shutdown and starts again with first succesful reboot!

Share this post


Link to post
Share on other sites

Here's my log. I was trying out Xfdrake when I get a black screen with a responsive mouse cursor, ctrl+alt+backspace isn't working so I am trying to remember this mnemonic about elephants, which I couldn't remember to shut down cleanly...anyway here's the log.

 

 

btw: I also checked the raw logs, there is nothing there....

 

 

Jan 10 01:35:25 localhost XFdrake[5123]: default cancel_clicked

Jan 10 01:36:17 localhost kernel: SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount rsbac_emergency_Wakeup

Jan 10 01:36:18 localhost kernel: SysRq : Emergency rsbacd/init wake-up!

Jan 10 01:36:18 localhost kernel:

Jan 10 01:36:18 localhost kernel: 0000000000|SysRq: Emergency rsbacd/init wake-up!

Jan 10 01:36:18 localhost exiting on signal 15

Jan 10 01:39:12 localhost syslogd 1.4.1: restart.

Jan 10 01:39:12 localhost INIT: Loading ACPI module thermal: successfull

Jan 10 01:39:12 localhost INIT: Loading ACPI module video: successfull

Jan 10 01:39:12 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.

Jan 10 01:39:12 localhost kernel: Inspecting /boot/System.map-2.6.17-9mdv

Jan 10 01:39:13 localhost crond[2415]: (CRON) STARTUP (V5.0)

Jan 10 01:39:13 localhost kernel: Loaded 21432 symbols from /boot/System.map-2.6.17-9mdv.

Jan 10 01:39:13 localhost kernel: Symbols match kernel version 2.6.17.

Jan 10 01:39:13 localhost kernel: No module symbols loaded - kernel modules not enabled.

Jan 10 01:39:13 localhost kernel: Linux version 2.6.17-9mdv (rtp@octopus.mandriva.com) (gcc version 4.1.2 20061110 (prerelease) (4.1.2-0.20061110.1mdv2007.1)) #1 SMP Wed Dec 27 12:38:36 EST 2006

Jan 10 01:39:13 localhost kernel: BIOS-provided physical RAM map:

Jan 10 01:39:13 localhost kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 0000000000100000 - 000000005ff70000 (usable)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 000000005ff70000 - 000000005ff72000 (ACPI NVS)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 000000005ff72000 - 000000005ff93000 (ACPI data)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 000000005ff93000 - 0000000060000000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)

Jan 10 01:39:13 localhost kernel: 639MB HIGHMEM available.

Jan 10 01:39:13 localhost kernel: 895MB LOWMEM available.

Jan 10 01:39:13 localhost kernel: found SMP MP-table at 000fe710

Jan 10 01:39:13 localhost kernel: On node 0 totalpages: 393072

Jan 10 01:39:13 localhost kernel: DMA zone: 4096 pages, LIFO batch:0

Jan 10 01:39:13 localhost kernel: Normal zone: 225279 pages, LIFO batch:31

Jan 10 01:39:13 localhost kernel: HighMem zone: 163697 pages, LIFO batch:31

Jan 10 01:39:13 localhost kernel: DMI 2.3 present.

Jan 10 01:39:13 localhost kernel: ACPI: RSDP (v000 DELL ) @ 0x000feba0

Jan 10 01:39:13 localhost kernel: ACPI: RSDT (v001 DELL 4600i 0x00000007 ASL 0x00000061) @ 0x000fd1b3

Jan 10 01:39:13 localhost kernel: ACPI: FADT (v001 DELL 4600i 0x00000007 ASL 0x00000061) @ 0x000fd1e7

Jan 10 01:39:13 localhost kernel: ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd1cbb

Jan 10 01:39:13 localhost kernel: ACPI: MADT (v001 DELL 4600i 0x00000007 ASL 0x00000061) @ 0x000fd25b

Jan 10 01:39:13 localhost kernel: ACPI: BOOT (v001 DELL 4600i 0x00000007 ASL 0x00000061) @ 0x000fd2c7

Jan 10 01:39:13 localhost kernel: ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000

Jan 10 01:39:13 localhost kernel: ACPI: PM-Timer IO Port: 0x808

Jan 10 01:39:13 localhost kernel: ACPI: Local APIC address 0xfee00000

Jan 10 01:39:13 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

Jan 10 01:39:13 localhost kernel: Processor #0 15:2 APIC version 20

Jan 10 01:39:13 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)

Jan 10 01:39:13 localhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)

Jan 10 01:39:13 localhost kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)

Jan 10 01:39:13 localhost kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

Jan 10 01:39:13 localhost kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23

Jan 10 01:39:13 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

Jan 10 01:39:13 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

Jan 10 01:39:13 localhost kernel: ACPI: IRQ0 used by override.

Jan 10 01:39:13 localhost kernel: ACPI: IRQ2 used by override.

Jan 10 01:39:13 localhost kernel: ACPI: IRQ9 used by override.

Jan 10 01:39:13 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs

Jan 10 01:39:13 localhost kernel: Using ACPI (MADT) for SMP configuration information

Jan 10 01:39:13 localhost kernel: Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)

Jan 10 01:39:13 localhost kernel: Built 1 zonelists

Jan 10 01:39:13 localhost kernel: Kernel command line: BOOT_IMAGE=2.6.17-9 root=/dev/hda3 PROFILE=default splash=silent vga=794

Jan 10 01:39:13 localhost kernel: bootsplash: silent mode.

Jan 10 01:39:13 localhost kernel: mapped APIC to ffffe000 (fee00000)

Jan 10 01:39:13 localhost kernel: mapped IOAPIC to ffffd000 (fec00000)

Jan 10 01:39:13 localhost kernel: Enabling fast FPU save and restore... done.

Jan 10 01:39:13 localhost kernel: Enabling unmasked SIMD FPU exception support... done.

Jan 10 01:39:13 localhost kernel: Initializing CPU#0

Jan 10 01:39:13 localhost kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)

Jan 10 01:39:13 localhost kernel: Detected 2394.393 MHz processor.

Jan 10 01:39:13 localhost kernel: Using pmtmr for high-res timesource

Jan 10 01:39:13 localhost kernel: Console: colour dummy device 80x25

Jan 10 01:39:13 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Jan 10 01:39:13 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Jan 10 01:39:13 localhost kernel: Memory: 1552692k/1572288k available (2427k kernel code, 17888k reserved, 755k data, 244k init, 654788k highmem, 0k BadRAM)

Jan 10 01:39:13 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.

Jan 10 01:39:13 localhost kernel: Calibrating delay using timer specific routine.. 4793.62 BogoMIPS (lpj=9587248)

Jan 10 01:39:13 localhost kernel: Mount-cache hash table entries: 512

Jan 10 01:39:13 localhost kernel: CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000

Jan 10 01:39:13 localhost kernel: CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000

Jan 10 01:39:13 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K

Jan 10 01:39:13 localhost kernel: CPU: L2 cache: 512K

Jan 10 01:39:13 localhost kernel: CPU: Hyper-Threading is disabled

Jan 10 01:39:13 localhost kernel: CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000

Jan 10 01:39:13 localhost kernel: Intel machine check architecture supported.

Jan 10 01:39:13 localhost kernel: Intel machine check reporting enabled on CPU#0.

Jan 10 01:39:13 localhost kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available

Jan 10 01:39:13 localhost kernel: CPU0: Thermal monitoring enabled

Jan 10 01:39:13 localhost kernel: Checking 'hlt' instruction... OK.

Jan 10 01:39:13 localhost kernel: SMP alternatives: switching to UP code

Jan 10 01:39:13 localhost kernel: Freeing SMP alternatives: 16k freed

Jan 10 01:39:13 localhost kernel: checking if image is initramfs... it is

Jan 10 01:39:13 localhost kernel: Freeing initrd memory: 857k freed

Jan 10 01:39:13 localhost kernel: ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

Jan 10 01:39:13 localhost kernel: CPU0: Intel® Pentium® 4 CPU 2.40GHz stepping 07

Jan 10 01:39:13 localhost kernel: Total of 1 processors activated (4793.62 BogoMIPS).

Jan 10 01:39:13 localhost kernel: ENABLING IO-APIC IRQs

Jan 10 01:39:13 localhost kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

Jan 10 01:39:13 localhost kernel: Brought up 1 CPUs

Jan 10 01:39:13 localhost kernel: migration_cost=0

Jan 10 01:39:13 localhost kernel: NET: Registered protocol family 16

Jan 10 01:39:13 localhost kernel: ACPI: bus type pci registered

Jan 10 01:39:13 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbb11, last bus=2

Jan 10 01:39:13 localhost kernel: Setting up standard PCI resources

Jan 10 01:39:13 localhost kernel: ACPI: Subsystem revision 20060127

Jan 10 01:39:13 localhost kernel: ACPI: Interpreter enabled

Jan 10 01:39:13 localhost kernel: ACPI: Using IOAPIC for interrupt routing

Jan 10 01:39:13 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)

Jan 10 01:39:13 localhost kernel: PCI: Probing PCI hardware (bus 00)

Jan 10 01:39:13 localhost kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0

Jan 10 01:39:13 localhost kernel: PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO

Jan 10 01:39:13 localhost kernel: PCI quirk: region 0880-08bf claimed by ICH4 GPIO

Jan 10 01:39:13 localhost kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1

Jan 10 01:39:13 localhost kernel: Boot video device is 0000:01:00.0

Jan 10 01:39:13 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)

Jan 10 01:39:13 localhost kernel: Linux Plug and Play Support v0.97 © Adam Belay

Jan 10 01:39:13 localhost kernel: pnp: PnP ACPI init

Jan 10 01:39:13 localhost kernel: pnp: PnP ACPI: found 10 devices

Jan 10 01:39:13 localhost kernel: PnPBIOS: Disabled

Jan 10 01:39:13 localhost kernel: PCI: Using ACPI for IRQ routing

Jan 10 01:39:13 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

Jan 10 01:39:13 localhost kernel: pnp: 00:09: ioport range 0x800-0x85f could not be reserved

Jan 10 01:39:13 localhost kernel: pnp: 00:09: ioport range 0xc00-0xc7f has been reserved

Jan 10 01:39:13 localhost kernel: pnp: 00:09: ioport range 0x860-0x8ff could not be reserved

Jan 10 01:39:13 localhost kernel: PCI: Bridge: 0000:00:01.0

Jan 10 01:39:13 localhost kernel: IO window: disabled.

Jan 10 01:39:13 localhost kernel: MEM window: fc000000-feafffff

Jan 10 01:39:13 localhost kernel: PREFETCH window: e0000000-efffffff

Jan 10 01:39:13 localhost kernel: PCI: Bridge: 0000:00:1e.0

Jan 10 01:39:13 localhost kernel: IO window: d000-dfff

Jan 10 01:39:13 localhost kernel: MEM window: fbf00000-fbffffff

Jan 10 01:39:13 localhost kernel: PREFETCH window: disabled.

Jan 10 01:39:13 localhost kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64

Jan 10 01:39:13 localhost kernel: NET: Registered protocol family 2

Jan 10 01:39:13 localhost kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

Jan 10 01:39:13 localhost kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)

Jan 10 01:39:13 localhost kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

Jan 10 01:39:13 localhost kernel: TCP: Hash tables configured (established 262144 bind 65536)

Jan 10 01:39:13 localhost kernel: TCP reno registered

Jan 10 01:39:13 localhost kernel: Simple Boot Flag value 0x87 read from CMOS RAM was invalid

Jan 10 01:39:13 localhost kernel: Simple Boot Flag at 0x7a set to 0x1

Jan 10 01:39:13 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

Jan 10 01:39:13 localhost kernel: apm: overridden by ACPI.

Jan 10 01:39:13 localhost kernel: audit: initializing netlink socket (disabled)

Jan 10 01:39:13 localhost kernel: audit(1168393130.336:1): initialized

Jan 10 01:39:13 localhost kernel: highmem bounce pool size: 64 pages

Jan 10 01:39:13 localhost kernel: Total HugeTLB memory allocated, 0

Jan 10 01:39:13 localhost kernel: VFS: Disk quotas dquot_6.5.1

Jan 10 01:39:13 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Jan 10 01:39:13 localhost kernel: Initializing Cryptographic API

Jan 10 01:39:13 localhost kernel: io scheduler noop registered

Jan 10 01:39:13 localhost kernel: io scheduler anticipatory registered (default)

Jan 10 01:39:13 localhost kernel: io scheduler deadline registered

Jan 10 01:39:13 localhost kernel: io scheduler cfq registered

Jan 10 01:39:13 localhost kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 10240k, total 131072k

Jan 10 01:39:13 localhost kernel: vesafb: mode is 1280x1024x16, linelength=2560, pages=1

Jan 10 01:39:13 localhost kernel: vesafb: protected mode interface info at c000:d890

Jan 10 01:39:13 localhost kernel: vesafb: scrolling: redraw

Jan 10 01:39:13 localhost kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

Jan 10 01:39:13 localhost kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 339579 bytes,<6>...found (1280x1024, 339531 bytes, v3).

Jan 10 01:39:13 localhost kernel: Console: switching to colour frame buffer device 150x54

Jan 10 01:39:13 localhost kernel: fb0: VESA VGA frame buffer device

Jan 10 01:39:13 localhost kernel: isapnp: Scanning for PnP cards...

Jan 10 01:39:13 localhost kernel: isapnp: No Plug & Play device found

Jan 10 01:39:13 localhost kernel: Real Time Clock Driver v1.12ac

Jan 10 01:39:13 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

Jan 10 01:39:13 localhost kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Jan 10 01:39:13 localhost kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Jan 10 01:39:13 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize

Jan 10 01:39:13 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

Jan 10 01:39:13 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

Jan 10 01:39:13 localhost kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16

Jan 10 01:39:13 localhost kernel: ICH5: chipset revision 2

Jan 10 01:39:13 localhost kernel: ICH5: not 100% native mode: will probe irqs later

Jan 10 01:39:13 localhost kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio

Jan 10 01:39:13 localhost kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA

Jan 10 01:39:13 localhost kernel: Probing IDE interface ide0...

Jan 10 01:39:13 localhost kernel: hda: IC35L120AVV207-0, ATA DISK drive

Jan 10 01:39:13 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

Jan 10 01:39:13 localhost kernel: Probing IDE interface ide1...

Jan 10 01:39:13 localhost kernel: hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive

Jan 10 01:39:13 localhost kernel: hdd: _NEC CD-RW NR-9300A, ATAPI CD/DVD-ROM drive

Jan 10 01:39:13 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15

Jan 10 01:39:13 localhost kernel: hda: max request size: 512KiB

Jan 10 01:39:13 localhost kernel: hda: 234375000 sectors (120000 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)

Jan 10 01:39:13 localhost kernel: hda: cache flushes supported

Jan 10 01:39:13 localhost kernel: hda: hda1 < hda5 > hda2 hda3

Jan 10 01:39:13 localhost kernel: PNP: No PS/2 controller found. Probing ports directly.

Jan 10 01:39:13 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12

Jan 10 01:39:13 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1

Jan 10 01:39:13 localhost kernel: mice: PS/2 mouse device common for all mice

Jan 10 01:39:13 localhost kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27

Jan 10 01:39:13 localhost kernel: md: bitmap version 4.39

Jan 10 01:39:13 localhost kernel: TCP bic registered

Jan 10 01:39:13 localhost kernel: NET: Registered protocol family 1

Jan 10 01:39:13 localhost kernel: Using IPI No-Shortcut mode

Jan 10 01:39:13 localhost kernel: ACPI wakeup devices:

Jan 10 01:39:13 localhost kernel: VBTN PCI0 USB0 USB1 USB2 USB3 PCI1

Jan 10 01:39:13 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)

Jan 10 01:39:13 localhost kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices found

Jan 10 01:39:13 localhost kernel: Freeing unused kernel memory: 244k freed

Jan 10 01:39:13 localhost kernel: SCSI subsystem initialized

Jan 10 01:39:13 localhost kernel: libata version 1.20 loaded.

Jan 10 01:39:13 localhost kernel: ata_piix 0000:00:1f.2: version 1.05

Jan 10 01:39:13 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16

Jan 10 01:39:13 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64

Jan 10 01:39:13 localhost kernel: ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 16

Jan 10 01:39:13 localhost kernel: ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 16

Jan 10 01:39:13 localhost kernel: ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3e01 87:4003 88:203f

Jan 10 01:39:13 localhost kernel: ata1: dev 0 ATA-6, max UDMA/100, 312581808 sectors: LBA48

Jan 10 01:39:13 localhost kernel: ata1(0): applying bridge limits

Jan 10 01:39:13 localhost kernel: ata1: dev 0 configured for UDMA/100

Jan 10 01:39:13 localhost kernel: scsi0 : ata_piix

Jan 10 01:39:13 localhost kernel: ata2: SATA port has no device.

Jan 10 01:39:13 localhost kernel: scsi1 : ata_piix

Jan 10 01:39:13 localhost kernel: Vendor: ATA Model: WDC WD1600JD-00G Rev: 02.0

Jan 10 01:39:13 localhost kernel: Type: Direct-Access ANSI SCSI revision: 05

Jan 10 01:39:13 localhost kernel: kjournald starting. Commit interval 5 seconds

Jan 10 01:39:13 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.

Jan 10 01:39:13 localhost kernel: usbcore: registered new driver usbfs

Jan 10 01:39:13 localhost kernel: usbcore: registered new driver hub

Jan 10 01:39:13 localhost kernel: USB Universal Host Controller Interface driver v3.0

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17

Jan 10 01:39:13 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80

Jan 10 01:39:13 localhost kernel: usb usb1: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: hub 1-0:1.0: USB hub found

Jan 10 01:39:13 localhost kernel: hub 1-0:1.0: 2 ports detected

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 18

Jan 10 01:39:13 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60

Jan 10 01:39:13 localhost kernel: usb usb2: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: hub 2-0:1.0: USB hub found

Jan 10 01:39:13 localhost kernel: hub 2-0:1.0: 2 ports detected

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16

Jan 10 01:39:13 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ff40

Jan 10 01:39:13 localhost kernel: usb usb3: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: hub 3-0:1.0: USB hub found

Jan 10 01:39:13 localhost kernel: hub 3-0:1.0: 2 ports detected

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17

Jan 10 01:39:13 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000ff20

Jan 10 01:39:13 localhost kernel: usb usb4: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: hub 4-0:1.0: USB hub found

Jan 10 01:39:13 localhost kernel: hub 4-0:1.0: 2 ports detected

Jan 10 01:39:13 localhost kernel: usb 1-1: new low speed USB device using uhci_hcd and address 2

Jan 10 01:39:13 localhost kernel: usb 1-1: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: usb 1-2: new full speed USB device using uhci_hcd and address 3

Jan 10 01:39:13 localhost kernel: usb 1-2: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: usb 2-2: new low speed USB device using uhci_hcd and address 2

Jan 10 01:39:13 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: usb 3-1: new low speed USB device using uhci_hcd and address 2

Jan 10 01:39:13 localhost kernel: usb 3-1: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: input: Logitech USB Receiver as /class/input/input0

Jan 10 01:39:13 localhost kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204

Jan 10 01:39:13 localhost kernel: usbcore: registered new driver usblp

Jan 10 01:39:13 localhost kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver

Jan 10 01:39:13 localhost kernel: usbcore: registered new driver usbkbd

Jan 10 01:39:13 localhost kernel: drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver

Jan 10 01:39:13 localhost kernel: usbcore: registered new driver hiddev

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19

Jan 10 01:39:13 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64

Jan 10 01:39:13 localhost kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller

Jan 10 01:39:13 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5

Jan 10 01:39:13 localhost kernel: ehci_hcd 0000:00:1d.7: debug port 1

Jan 10 01:39:13 localhost kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7

Jan 10 01:39:13 localhost kernel: ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800

Jan 10 01:39:13 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

Jan 10 01:39:13 localhost kernel: usb usb5: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: hub 5-0:1.0: USB hub found

Jan 10 01:39:13 localhost kernel: hub 5-0:1.0: 8 ports detected

Jan 10 01:39:13 localhost kernel: usb 2-2: USB disconnect, address 2

Jan 10 01:39:13 localhost kernel: usbcore: registered new driver usbhid

Jan 10 01:39:13 localhost kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver

Jan 10 01:39:13 localhost kernel: input: Logitech USB Receiver as /class/input/input1

Jan 10 01:39:13 localhost kernel: input: Logitech USB Receiver as /class/input/input2

Jan 10 01:39:13 localhost kernel: ieee1394: Initialized config rom entry `ip1394'

Jan 10 01:39:13 localhost kernel: usb 3-1: USB disconnect, address 2

Jan 10 01:39:13 localhost kernel: usbcore: registered new driver usbmouse

Jan 10 01:39:13 localhost kernel: drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:02:02.2 -> GSI 18 (level, low) -> IRQ 16

Jan 10 01:39:13 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fbffa800-fbffafff] Max Packet=[2048] IR/IT contexts=[4/8]

Jan 10 01:39:13 localhost kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)

Jan 10 01:39:13 localhost kernel: sda: Write Protect is off

Jan 10 01:39:13 localhost kernel: sda: Mode Sense: 00 3a 00 00

Jan 10 01:39:13 localhost kernel: SCSI device sda: drive cache: write back

Jan 10 01:39:13 localhost kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)

Jan 10 01:39:13 localhost kernel: sda: Write Protect is off

Jan 10 01:39:13 localhost kernel: sda: Mode Sense: 00 3a 00 00

Jan 10 01:39:13 localhost kernel: SCSI device sda: drive cache: write back

Jan 10 01:39:13 localhost kernel: sda: sda1 sda3

Jan 10 01:39:13 localhost kernel: sd 0:0:0:0: Attached scsi disk sda

Jan 10 01:39:13 localhost kernel: usb 3-1: new low speed USB device using uhci_hcd and address 3

Jan 10 01:39:13 localhost kernel: usb 3-1: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: input: Logitech USB Receiver as /class/input/input3

Jan 10 01:39:13 localhost kernel: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1

Jan 10 01:39:13 localhost kernel: input: Logitech USB Receiver as /class/input/input4

Jan 10 01:39:13 localhost kernel: input,hiddev1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1

Jan 10 01:39:13 localhost kernel: usb 1-1: USB disconnect, address 2

Jan 10 01:39:13 localhost kernel: drivers/usb/input/usbkbd.c: can't resubmit intr, 0000:00:1d.0-1/input0, status -19

Jan 10 01:39:13 localhost kernel: ts: Compaq touchscreen protocol output

Jan 10 01:39:13 localhost kernel: usb 1-1: new low speed USB device using uhci_hcd and address 4

Jan 10 01:39:13 localhost kernel: usb 1-1: configuration #1 chosen from 1 choice

Jan 10 01:39:13 localhost kernel: input: Logitech USB Receiver as /class/input/input5

Jan 10 01:39:13 localhost kernel: input: Logitech USB Receiver as /class/input/input6

Jan 10 01:39:13 localhost kernel: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1

Jan 10 01:39:13 localhost kernel: usb 1-2: USB disconnect, address 3

Jan 10 01:39:13 localhost kernel: drivers/usb/class/usblp.c: usblp0: removed

Jan 10 01:39:13 localhost kernel: usb 1-2: new full speed USB device using uhci_hcd and address 5

Jan 10 01:39:13 localhost kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00a101d668]

Jan 10 01:39:13 localhost kernel: usb 1-2: configuration #1 chosen from 1 choice

Jan 10 01:39:14 localhost hpiod: 1.6.10 accepting connections at 2208...

Jan 10 01:39:13 localhost kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204

Jan 10 01:39:15 localhost kernel: usb 2-2: new low speed USB device using uhci_hcd and address 3

Jan 10 01:39:15 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice

Jan 10 01:39:15 localhost kernel: Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>

Jan 10 01:39:15 localhost kernel: input: Logitech Logitech Cordless RumblePad 2 as /class/input/input7

Jan 10 01:39:15 localhost kernel: input: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.1-2

Jan 10 01:39:15 localhost kernel: input: PC Speaker as /class/input/input8

Jan 10 01:39:15 localhost kernel: cdemu:80: cdemu_init: start

Jan 10 01:39:15 localhost kernel: cdemu:122: cdemu_init: making cdrom #0 [f7874000]: cdemu0

Jan 10 01:39:15 localhost kernel: Uniform CD-ROM driver Revision: 3.20

Jan 10 01:39:15 localhost kernel: cdemu:122: cdemu_init: making cdrom #1 [f7874478]: cdemu1

Jan 10 01:39:15 localhost kernel: cdemu:122: cdemu_init: making cdrom #2 [f78748f0]: cdemu2

Jan 10 01:39:15 localhost kernel: cdemu:122: cdemu_init: making cdrom #3 [f7874d68]: cdemu3

Jan 10 01:39:15 localhost kernel: cdemu:122: cdemu_init: making cdrom #4 [f78751e0]: cdemu4

Jan 10 01:39:15 localhost kernel: cdemu:122: cdemu_init: making cdrom #5 [f7875658]: cdemu5

Jan 10 01:39:15 localhost kernel: cdemu:122: cdemu_init: making cdrom #6 [f7875ad0]: cdemu6

Jan 10 01:39:15 localhost kernel: cdemu:122: cdemu_init: making cdrom #7 [f7875f48]: cdemu7

Jan 10 01:39:15 localhost kernel: cdemu:155: cdemu_init: loaded (max 8 devices)

Jan 10 01:39:15 localhost kernel: cdemu:156: cdemu_init: end

Jan 10 01:39:15 localhost kernel: cdemu:157: ver 0.8.0 loaded. Registered 8 cdemus.

Jan 10 01:39:15 localhost kernel: cdemu:555: cdemu_block_open: start

Jan 10 01:39:15 localhost kernel: cdemu:562: cdemu_block_open: going into cdrom_open()

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:555: cdemu_block_open: start

Jan 10 01:39:15 localhost kernel: cdemu:562: cdemu_block_open: going into cdrom_open()

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:555: cdemu_block_open: start

Jan 10 01:39:15 localhost kernel: cdemu:562: cdemu_block_open: going into cdrom_open()

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:555: cdemu_block_open: start

Jan 10 01:39:15 localhost kernel: cdemu:562: cdemu_block_open: going into cdrom_open()

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:555: cdemu_block_open: start

Jan 10 01:39:15 localhost kernel: cdemu:562: cdemu_block_open: going into cdrom_open()

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:555: cdemu_block_open: start

Jan 10 01:39:15 localhost kernel: cdemu:562: cdemu_block_open: going into cdrom_open()

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:555: cdemu_block_open: start

Jan 10 01:39:15 localhost kernel: cdemu:562: cdemu_block_open: going into cdrom_open()

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:555: cdemu_block_open: start

Jan 10 01:39:15 localhost kernel: cdemu:562: cdemu_block_open: going into cdrom_open()

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: cdemu:290: cdemu_drive_status: start

Jan 10 01:39:15 localhost kernel: cdemu:299: cdemu_drive_status: loaded: 0

Jan 10 01:39:15 localhost kernel: fuse init (API version 7.8)

Jan 10 01:39:15 localhost kernel: fuse distribution version: 2.6.1

Jan 10 01:39:15 localhost kernel: hw_random hardware driver 1.0.0 loaded

Jan 10 01:39:15 localhost kernel: Linux agpgart interface v0.101 © Dave Jones

Jan 10 01:39:15 localhost kernel: agpgart: Detected an Intel 865 Chipset.

Jan 10 01:39:15 localhost kernel: agpgart: AGP aperture is 256M @ 0xd0000000

Jan 10 01:39:15 localhost kernel: p4-clockmod: P4/Xeon CPU On-Demand Clock Modulation available

Jan 10 01:39:15 localhost kernel: device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com

Jan 10 01:39:15 localhost kernel: EXT3 FS on hda3, internal journal

Jan 10 01:39:15 localhost kernel: kjournald starting. Commit interval 5 seconds

Jan 10 01:39:15 localhost kernel: EXT3 FS on hda2, internal journal

Jan 10 01:39:15 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.

Jan 10 01:39:15 localhost kernel: loop: loaded (max 8 devices, max 1 partitions per device)

Jan 10 01:39:15 localhost kernel: hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)

Jan 10 01:39:15 localhost kernel: hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)

Jan 10 01:39:15 localhost kernel: Netfilter messages via NETLINK v0.30.

Jan 10 01:39:15 localhost kernel: ACPI: Power Button (FF) [PWRF]

Jan 10 01:39:15 localhost kernel: ACPI: Power Button (CM) [VBTN]

Jan 10 01:39:15 localhost kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 224 bytes per conntrack

Jan 10 01:39:15 localhost kernel: Using specific hotkey driver

Jan 10 01:39:15 localhost kernel: Removing netfilter NETLINK layer.

Jan 10 01:39:20 localhost kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 17 (level, low) -> IRQ 20

Jan 10 01:39:20 localhost kernel: Installing spdif_bug patch: Audigy 2 ZS [sB0353]

Jan 10 01:39:20 localhost kernel: NET: Registered protocol family 17

Jan 10 01:39:21 localhost kernel: e100: Intel® PRO/100 Network Driver, 3.5.14

Jan 10 01:39:21 localhost kernel: e100: Copyright© 1999-2006 Intel Corporation

Jan 10 01:39:21 localhost kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 21

Jan 10 01:39:21 localhost kernel: e100: eth0: e100_probe: addr 0xfbffb000, irq 21, MAC addr 00:07:E9:7E:D5:10

Jan 10 01:39:21 localhost ifplugd(eth1)[3096]: ifplugd 0.28 initializing.

Jan 10 01:39:21 localhost kernel: e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex

Jan 10 01:39:21 localhost ifplugd(eth1)[3096]: Using interface eth1/00:07:E9:7E:D5:10 with driver <e100> (version: 3.5.14)

Jan 10 01:39:21 localhost ifplugd(eth1)[3096]: Using detection mode: SIOCETHTOOL

Jan 10 01:39:21 localhost ifplugd(eth1)[3096]: Initialization complete, link beat detected.

Jan 10 01:39:21 localhost ifplugd(eth1)[3096]: Executing '/etc/ifplugd/ifplugd.action eth1 up'.

Jan 10 01:39:27 localhost dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67

Jan 10 01:39:27 localhost dhclient: DHCPACK from 192.168.1.1

Jan 10 01:39:27 localhost dhclient: bound to 192.168.1.64 -- renewal in 34892 seconds.

Jan 10 01:39:27 localhost ifplugd(eth1)[3096]: client: Determining IP information for eth1... done.

Jan 10 01:39:27 localhost ifplugd(eth1)[3096]: client: /etc/sysconfig/network-scripts/ifup-aliases: line 137: Mask: command not found

Jan 10 01:39:27 localhost ifplugd(eth1)[3096]: Program executed successfully.

Jan 10 01:39:28 localhost xinetd[3652]: Reading included configuration file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.conf] [line=15]

Jan 10 01:39:28 localhost xinetd[3652]: Reading included configuration file: /etc/xinetd.d/cvs [file=/etc/xinetd.d/cvs] [line=15]

Jan 10 01:39:28 localhost xinetd[3652]: Reading included configuration file: /etc/xinetd.d/ftp [file=/etc/xinetd.d/ftp] [line=12]

Jan 10 01:39:28 localhost xinetd[3652]: Reading included configuration file: /etc/xinetd.d/hotsmtpd [file=/etc/xinetd.d/hotsmtpd] [line=12]

Jan 10 01:39:28 localhost xinetd[3652]: Reading included configuration file: /etc/xinetd.d/hotwayd [file=/etc/xinetd.d/hotwayd] [line=14]

Jan 10 01:39:28 localhost xinetd[3652]: Reading included configuration file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=14]

Jan 10 01:39:28 localhost xinetd[3652]: Reading included configuration file: /etc/xinetd.d/saned [file=/etc/xinetd.d/saned] [line=13]

Jan 10 01:39:29 localhost xinetd[3652]: removing printer

Jan 10 01:39:29 localhost xinetd[3652]: removing cvspserver

Jan 10 01:39:29 localhost xinetd[3652]: removing rsync

Jan 10 01:39:29 localhost xinetd[3652]: service/protocol combination not in /etc/services: sane-port/tcp

Jan 10 01:39:29 localhost xinetd[3652]: xinetd Version 2.3.14 started with libwrap options compiled in.

Jan 10 01:39:29 localhost xinetd[3652]: Started working: 3 available services

Jan 10 01:39:30 localhost kdm_config[3798]: Invalid option value 'All' at /usr/share/config/kdm/kdmrc:52

Jan 10 01:39:32 localhost kernel: nvidia: module license 'NVIDIA' taints kernel.

Jan 10 01:39:32 localhost kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17

Jan 10 01:39:32 localhost kernel: NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2006

Jan 10 01:39:33 localhost kernel: NVRM: not using NVAGP, an AGPGART backend is loaded!

Jan 10 01:39:36 localhost ntpdate[3682]: step time server 194.171.167.130 offset -0.021651 sec

Jan 10 01:39:36 localhost ntpd[3863]: ntpd 4.2.4@1.1437-o Sun Jan 7 11:00:03 UTC 2007 (1)

Jan 10 01:39:36 localhost ntpd[3864]: precision = 1.000 usec

Jan 10 01:39:36 localhost ntpd[3864]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16

Jan 10 01:39:36 localhost ntpd[3864]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled

Jan 10 01:39:36 localhost ntpd[3864]: Listening on interface #1 lo, 127.0.0.1#123 Enabled

Jan 10 01:39:36 localhost ntpd[3864]: Listening on interface #2 eth1, 192.168.1.64#123 Enabled

Jan 10 01:39:36 localhost ntpd[3864]: kernel time sync status 0040

Jan 10 01:39:36 localhost ntpd[3864]: frequency initialized 35.570 PPM from /etc/ntp/drift

Jan 10 01:39:36 localhost ntpd[3864]: running in unprivileged mode disables dynamic interface tracking

Jan 10 01:39:37 localhost kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1280x1024, 29378 bytes, v3).

Jan 10 01:39:37 localhost kernel: bootsplash: status on console 0 changed to on

Jan 10 01:39:37 localhost kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1280x1024, 29378 bytes, v3).

Jan 10 01:39:37 localhost kernel: bootsplash: status on console 1 changed to on

Jan 10 01:39:37 localhost kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1280x1024, 29378 bytes, v3).

Jan 10 01:39:37 localhost kernel: bootsplash: status on console 2 changed to on

Jan 10 01:39:37 localhost kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1280x1024, 29378 bytes, v3).

Jan 10 01:39:37 localhost kernel: bootsplash: status on console 3 changed to on

Jan 10 01:39:37 localhost kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1280x1024, 29378 bytes, v3).

Jan 10 01:39:37 localhost kernel: bootsplash: status on console 4 changed to on

Jan 10 01:39:37 localhost kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1280x1024, 29378 bytes, v3).

Jan 10 01:39:37 localhost kernel: bootsplash: status on console 5 changed to on

Jan 10 01:39:42 localhost kdm_greet[3942]: Can't open default user face

Jan 10 01:40:12 localhost kernel: parport: PnPBIOS parport detected.

Jan 10 01:40:12 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]

Jan 10 01:40:12 localhost kernel: lp0: using parport0 (interrupt-driven).

Jan 10 01:40:12 localhost kernel: lp0: console ready

Jan 10 01:40:12 localhost kernel: ppdev: user-space parallel port driver

Jan 10 01:40:12 localhost kernel: ppdev0: registered pardevice

Jan 10 01:40:12 localhost kernel: ppdev0: unregistered pardevice

Jan 10 01:40:13 localhost kernel: ppdev0: registered pardevice

Jan 10 01:40:13 localhost kernel: ppdev0: unregistered pardevice

Jan 10 01:40:13 localhost kernel: ppdev0: registered pardevice

Jan 10 01:40:13 localhost kernel: ppdev0: unregistered pardevice

Jan 10 01:40:13 localhost kernel: ppdev0: registered pardevice

Jan 10 01:40:13 localhost kernel: ppdev0: unregistered pardevice

Jan 10 01:40:29 localhost kernel: FDC 0 is a post-1991 82077

Jan 10 01:42:52 localhost ntpd[3864]: synchronized to LOCAL(0), stratum 10

Jan 10 01:42:52 localhost ntpd[3864]: kernel time sync status change 0001

Jan 10 01:43:56 localhost ntpd[3864]: synchronized to 193.125.143.172, stratum 2

Jan 10 01:48:13 localhost ntpd[3864]: synchronized to 193.216.51.18, stratum 2

Jan 10 01:54:47 localhost ntpd[3864]: synchronized to 193.125.143.172, stratum 2

Jan 10 01:59:43 localhost gconfd (root-4682): starting (version 2.16.0), pid 4682 user 'root'

Jan 10 01:59:43 localhost gconfd (root-4682): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0

Jan 10 01:59:43 localhost gconfd (root-4682): Resolved address "xml:readonly:/etc/gconf/gconf.xml.local-mandatory" to a read-only configuration source at position 1

Jan 10 01:59:43 localhost gconfd (root-4682): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2

Jan 10 01:59:43 localhost gconfd (root-4682): Resolved address "xml:readonly:/etc/gconf/gconf.xml.local-defaults" to a read-only configuration source at position 3

Jan 10 01:59:43 localhost gconfd (root-4682): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 4

 

 

Jan 10 01:27:45 localhost last message repeated 2 times

Jan 10 01:27:45 localhost diskdrake[5044]: ### Program is exiting ###

Jan 10 01:35:12 localhost XFdrake[5123]: ### Program is starting ###

Jan 10 01:35:25 localhost XFdrake[5123]: default cancel_clicked

Jan 10 01:35:25 localhost XFdrake[5123]: ### Program is exiting ###

Jan 10 01:35:28 localhost XFdrake[5127]: ### Program is starting ###

Jan 10 01:35:28 localhost XFdrake[5127]: running: /bin/rpm -q --qf %{name} task-x11

Jan 10 01:35:29 localhost XFdrake[5127]: launched command: mount /proc 2>/dev/null

Jan 10 01:35:40 localhost XFdrake[5127]: removed files/directories /tmp/.X9-lock

Jan 10 01:35:40 localhost XFdrake[5127]: created file //etc/X11/XF86Config.test

Jan 10 01:35:40 localhost XFdrake[5127]: launched command: xauth add :9 . `mcookie`

Jan 10 01:35:46 localhost XFdrake[5127]: removed files/directories //etc/X11/XF86Config.test //etc/X11/XF86Config.test-4

Jan 10 01:35:46 localhost XFdrake[5127]: removed files/directories /root/tmp/.drakx.Xoutput

Jan 10 01:36:17 localhost kernel: SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount rsbac_emergency_Wakeup

Jan 10 01:36:18 localhost kernel: SysRq : Emergency rsbacd/init wake-up!

Jan 10 01:36:18 localhost kernel:

Jan 10 01:36:18 localhost kernel: 0000000000|SysRq: Emergency rsbacd/init wake-up!

Jan 10 01:36:18 localhost exiting on signal 15

Jan 10 01:39:12 localhost syslogd 1.4.1: restart.

Jan 10 01:39:12 localhost INIT: Loading ACPI module thermal: successfull

Jan 10 01:39:12 localhost INIT: Loading ACPI module video: successfull

Jan 10 01:39:12 localhost kernel: klogd 1.4.1' date=' log source = /proc/kmsg started.

Jan 10 01:39:12 localhost kernel: Inspecting /boot/System.map-2.6.17-9mdv

Jan 10 01:39:13 localhost crond[2415']: (CRON) STARTUP (V5.0)

Jan 10 01:39:13 localhost kernel: Loaded 21432 symbols from /boot/System.map-2.6.17-9mdv.

Jan 10 01:39:13 localhost kernel: Symbols match kernel version 2.6.17.

Jan 10 01:39:13 localhost kernel: No module symbols loaded - kernel modules not enabled.

Jan 10 01:39:13 localhost kernel: Linux version 2.6.17-9mdv (rtp@octopus.mandriva.com) (gcc version 4.1.2 20061110 (prerelease) (4.1.2-0.20061110.1mdv2007.1)) #1 SMP Wed Dec 27 12:38:36 EST 2006

Jan 10 01:39:13 localhost kernel: BIOS-provided physical RAM map:

Jan 10 01:39:13 localhost kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 0000000000100000 - 000000005ff70000 (usable)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 000000005ff70000 - 000000005ff72000 (ACPI NVS)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 000000005ff72000 - 000000005ff93000 (ACPI data)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 000000005ff93000 - 0000000060000000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)

Jan 10 01:39:13 localhost kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)

Jan 10 01:39:13 localhost kernel: 639MB HIGHMEM available.

Jan 10 01:39:13 localhost kernel: 895MB LOWMEM available.

Jan 10 01:39:13 localhost kernel: found SMP MP-table at 000fe710

Jan 10 01:39:13 localhost kernel: DMI 2.3 present.

Jan 10 01:39:13 localhost kernel: ACPI: PM-Timer IO Port: 0x808

Jan 10 01:39:13 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

Jan 10 01:39:13 localhost kernel: Processor #0 15:2 APIC version 20

Jan 10 01:39:13 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)

Jan 10 01:39:13 localhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)

Jan 10 01:39:13 localhost kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)

Jan 10 01:39:13 localhost kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

Jan 10 01:39:13 localhost kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23

Jan 10 01:39:13 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

Jan 10 01:39:13 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

Jan 10 01:39:13 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs

Jan 10 01:39:13 localhost kernel: Using ACPI (MADT) for SMP configuration information

Jan 10 01:39:13 localhost kernel: Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)

Jan 10 01:39:13 localhost kernel: Built 1 zonelists

Jan 10 01:39:13 localhost kernel: Kernel command line: BOOT_IMAGE=2.6.17-9 root=/dev/hda3 PROFILE=default splash=silent vga=794

Jan 10 01:39:13 localhost kernel: bootsplash: silent mode.

Jan 10 01:39:13 localhost kernel: Enabling fast FPU save and restore... done.

Jan 10 01:39:13 localhost kernel: Enabling unmasked SIMD FPU exception support... done.

Jan 10 01:39:13 localhost kernel: Initializing CPU#0

Jan 10 01:39:13 localhost kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)

Jan 10 01:39:13 localhost kernel: Detected 2394.393 MHz processor.

Jan 10 01:39:13 localhost kernel: Using pmtmr for high-res timesource

Jan 10 01:39:13 localhost kernel: Console: colour dummy device 80x25

Jan 10 01:39:13 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Jan 10 01:39:13 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Jan 10 01:39:13 localhost kernel: Memory: 1552692k/1572288k available (2427k kernel code, 17888k reserved, 755k data, 244k init, 654788k highmem, 0k BadRAM)

Jan 10 01:39:13 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.

Jan 10 01:39:13 localhost kernel: Calibrating delay using timer specific routine.. 4793.62 BogoMIPS (lpj=9587248)

Jan 10 01:39:13 localhost kernel: Mount-cache hash table entries: 512

Jan 10 01:39:13 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K

Jan 10 01:39:13 localhost kernel: CPU: L2 cache: 512K

Jan 10 01:39:13 localhost kernel: CPU: Hyper-Threading is disabled

Jan 10 01:39:13 localhost kernel: Intel machine check architecture supported.

Jan 10 01:39:13 localhost kernel: Intel machine check reporting enabled on CPU#0.

Jan 10 01:39:13 localhost kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available

Jan 10 01:39:13 localhost kernel: CPU0: Thermal monitoring enabled

Jan 10 01:39:13 localhost kernel: Checking 'hlt' instruction... OK.

Jan 10 01:39:13 localhost kernel: SMP alternatives: switching to UP code

Jan 10 01:39:13 localhost kernel: Freeing SMP alternatives: 16k freed

Jan 10 01:39:13 localhost kernel: checking if image is initramfs... it is

Jan 10 01:39:13 localhost kernel: Freeing initrd memory: 857k freed

Jan 10 01:39:13 localhost kernel: ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

Jan 10 01:39:13 localhost kernel: CPU0: Intel® Pentium® 4 CPU 2.40GHz stepping 07

Jan 10 01:39:13 localhost kernel: Total of 1 processors activated (4793.62 BogoMIPS).

Jan 10 01:39:13 localhost kernel: ENABLING IO-APIC IRQs

Jan 10 01:39:13 localhost kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

Jan 10 01:39:13 localhost kernel: Brought up 1 CPUs

Jan 10 01:39:13 localhost kernel: migration_cost=0

Jan 10 01:39:13 localhost kernel: NET: Registered protocol family 16

Jan 10 01:39:13 localhost kernel: ACPI: bus type pci registered

Jan 10 01:39:13 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbb11, last bus=2

Jan 10 01:39:13 localhost kernel: Setting up standard PCI resources

Jan 10 01:39:13 localhost kernel: ACPI: Subsystem revision 20060127

Jan 10 01:39:13 localhost kernel: ACPI: Interpreter enabled

Jan 10 01:39:13 localhost kernel: ACPI: Using IOAPIC for interrupt routing

Jan 10 01:39:13 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)

Jan 10 01:39:13 localhost kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0

Jan 10 01:39:13 localhost kernel: PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO

Jan 10 01:39:13 localhost kernel: PCI quirk: region 0880-08bf claimed by ICH4 GPIO

Jan 10 01:39:13 localhost kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1

Jan 10 01:39:13 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)

Jan 10 01:39:13 localhost kernel: Linux Plug and Play Support v0.97 © Adam Belay

Jan 10 01:39:13 localhost kernel: pnp: PnP ACPI init

Jan 10 01:39:13 localhost kernel: pnp: PnP ACPI: found 10 devices

Jan 10 01:39:13 localhost kernel: PnPBIOS: Disabled

Jan 10 01:39:13 localhost kernel: PCI: Using ACPI for IRQ routing

Jan 10 01:39:13 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

Jan 10 01:39:13 localhost kernel: pnp: 00:09: ioport range 0x800-0x85f could not be reserved

Jan 10 01:39:13 localhost kernel: pnp: 00:09: ioport range 0xc00-0xc7f has been reserved

Jan 10 01:39:13 localhost kernel: pnp: 00:09: ioport range 0x860-0x8ff could not be reserved

Jan 10 01:39:13 localhost kernel: PCI: Bridge: 0000:00:01.0

Jan 10 01:39:13 localhost kernel: IO window: disabled.

Jan 10 01:39:13 localhost kernel: MEM window: fc000000-feafffff

Jan 10 01:39:13 localhost kernel: PREFETCH window: e0000000-efffffff

Jan 10 01:39:13 localhost kernel: PCI: Bridge: 0000:00:1e.0

Jan 10 01:39:13 localhost kernel: IO window: d000-dfff

Jan 10 01:39:13 localhost kernel: MEM window: fbf00000-fbffffff

Jan 10 01:39:13 localhost kernel: PREFETCH window: disabled.

Jan 10 01:39:13 localhost kernel: NET: Registered protocol family 2

Jan 10 01:39:13 localhost kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

Jan 10 01:39:13 localhost kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)

Jan 10 01:39:13 localhost kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

Jan 10 01:39:13 localhost kernel: TCP: Hash tables configured (established 262144 bind 65536)

Jan 10 01:39:13 localhost kernel: TCP reno registered

Jan 10 01:39:13 localhost kernel: Simple Boot Flag value 0x87 read from CMOS RAM was invalid

Jan 10 01:39:13 localhost kernel: Simple Boot Flag at 0x7a set to 0x1

Jan 10 01:39:13 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

Jan 10 01:39:13 localhost kernel: apm: overridden by ACPI.

Jan 10 01:39:13 localhost kernel: audit: initializing netlink socket (disabled)

Jan 10 01:39:13 localhost kernel: audit(1168393130.336:1): initialized

Jan 10 01:39:13 localhost kernel: highmem bounce pool size: 64 pages

Jan 10 01:39:13 localhost kernel: Total HugeTLB memory allocated, 0

Jan 10 01:39:13 localhost kernel: VFS: Disk quotas dquot_6.5.1

Jan 10 01:39:13 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Jan 10 01:39:13 localhost kernel: Initializing Cryptographic API

Jan 10 01:39:13 localhost kernel: io scheduler noop registered

Jan 10 01:39:13 localhost kernel: io scheduler anticipatory registered (default)

Jan 10 01:39:13 localhost kernel: io scheduler deadline registered

Jan 10 01:39:13 localhost kernel: io scheduler cfq registered

Jan 10 01:39:13 localhost kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 10240k, total 131072k

Jan 10 01:39:13 localhost kernel: vesafb: mode is 1280x1024x16, linelength=2560, pages=1

Jan 10 01:39:13 localhost kernel: vesafb: protected mode interface info at c000:d890

Jan 10 01:39:13 localhost kernel: vesafb: scrolling: redraw

Jan 10 01:39:13 localhost kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

Jan 10 01:39:13 localhost kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 339579 bytes,<6>...found (1280x1024, 339531 bytes, v3).

Jan 10 01:39:13 localhost kernel: Console: switching to colour frame buffer device 150x54

Jan 10 01:39:13 localhost kernel: fb0: VESA VGA frame buffer device

Jan 10 01:39:13 localhost kernel: isapnp: Scanning for PnP cards...

Jan 10 01:39:13 localhost kernel: isapnp: No Plug & Play device found

Jan 10 01:39:13 localhost kernel: Real Time Clock Driver v1.12ac

Jan 10 01:39:13 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

Jan 10 01:39:13 localhost kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Jan 10 01:39:13 localhost kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Jan 10 01:39:13 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize

Jan 10 01:39:13 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

Jan 10 01:39:13 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

Jan 10 01:39:13 localhost kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16

Jan 10 01:39:13 localhost kernel: ICH5: chipset revision 2

Jan 10 01:39:13 localhost kernel: ICH5: not 100% native mode: will probe irqs later

Jan 10 01:39:13 localhost kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio

Jan 10 01:39:13 localhost kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA

Jan 10 01:39:13 localhost kernel: hda: IC35L120AVV207-0, ATA DISK drive

Jan 10 01:39:13 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

Jan 10 01:39:13 localhost kernel: hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive

Jan 10 01:39:13 localhost kernel: hdd: _NEC CD-RW NR-9300A, ATAPI CD/DVD-ROM drive

Jan 10 01:39:13 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15

Jan 10 01:39:13 localhost kernel: hda: max request size: 512KiB

Jan 10 01:39:13 localhost kernel: hda: 234375000 sectors (120000 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)

Jan 10 01:39:13 localhost kernel: hda: cache flushes supported

Jan 10 01:39:13 localhost kernel: hda: hda1 < hda5 > hda2 hda3

Jan 10 01:39:13 localhost kernel: PNP: No PS/2 controller found. Probing ports directly.

Jan 10 01:39:13 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12

Jan 10 01:39:13 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1

Jan 10 01:39:13 localhost kernel: mice: PS/2 mouse device common for all mice

Jan 10 01:39:13 localhost kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27

Jan 10 01:39:13 localhost kernel: md: bitmap version 4.39

Jan 10 01:39:13 localhost kernel: TCP bic registered

Jan 10 01:39:13 localhost kernel: NET: Registered protocol family 1

Jan 10 01:39:13 localhost kernel: Using IPI No-Shortcut mode

Jan 10 01:39:13 localhost kernel: ACPI wakeup devices:

Jan 10 01:39:13 localhost kernel: VBTN PCI0 USB0 USB1 USB2 USB3 PCI1

Jan 10 01:39:13 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)

Jan 10 01:39:13 localhost kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices found

Jan 10 01:39:13 localhost kernel: Freeing unused kernel memory: 244k freed

Jan 10 01:39:13 localhost kernel: SCSI subsystem initialized

Jan 10 01:39:13 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16

Jan 10 01:39:13 localhost kernel: ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 16

Jan 10 01:39:13 localhost kernel: ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 16

Jan 10 01:39:13 localhost kernel: ata1: dev 0 ATA-6, max UDMA/100, 312581808 sectors: LBA48

Jan 10 01:39:13 localhost kernel: ata1(0): applying bridge limits

Jan 10 01:39:13 localhost kernel: ata1: dev 0 configured for UDMA/100

Jan 10 01:39:13 localhost kernel: scsi0 : ata_piix

Jan 10 01:39:13 localhost kernel: ata2: SATA port has no device.

Jan 10 01:39:13 localhost kernel: scsi1 : ata_piix

Jan 10 01:39:13 localhost kernel: Vendor: ATA Model: WDC WD1600JD-00G Rev: 02.0

Jan 10 01:39:13 localhost kernel: Type: Direct-Access ANSI SCSI revision: 05

Jan 10 01:39:13 localhost kernel: kjournald starting. Commit interval 5 seconds

Jan 10 01:39:13 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.

Jan 10 01:39:13 localhost kernel: usbcore: registered new driver usbfs

Jan 10 01:39:13 localhost kernel: usbcore: registered new driver hub

Jan 10 01:39:13 localhost kernel: USB Universal Host Controller Interface driver v3.0

Jan 10 01:39:13 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

Jan 10 01:39:13 localhost kernel: uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80

Jan 10 01:39:13 localhost kernel: usb usb1: configuration #1 cho

Share this post


Link to post
Share on other sites
I suggest to browse in the logs (/var/log/messages for starters) to see whether these provide any clues where exactly this fails. The (new) parallel starting of services in 2007 makes it less than obvious what follows what. There is lots of detail in 'messages'...

 

Hmm, /var/log/messages file is full of data, but no sign of "Setting hostname localhost" or similar. Still looking for a solution.

 

It's quite intriguing to me why I have such a problem with Mandriva Free 2007, while didn't have with Mandriva 2007 PP... :dry:

Share this post


Link to post
Share on other sites

I have been going through your logs (and mine) as well as browsed through /etc/rc.sysinit (which contains the code to set the hostname). I had hoped to find a clue in the logs what happened after the setting of hostname that causes your system to hang. The call to set hostname is in line 471 of this file, but this file is 1424 lines long, so lots of other things happen (that possibly cause your system to freeze).

 

The sections immediately following hostname are ACPI, USB/Firewire and a whole block to mount the various file systems. If you are comfortable editing shell scripts, then you may want to place calls to "logger" after every thing -- this allows you to write a debug message into the log (messages). (urpmi logger if not installed). This process allows you to pintpoint the area a bit more accurate and doesn't hurt you if the boot is normal.

Share this post


Link to post
Share on other sites

Today I had to reinstall my Mandriva Free 2007, but the problem didn't dissapear. Maybe someone has found something that could help to resolve this issue? :unsure:

Share this post


Link to post
Share on other sites
Today I had to reinstall my Mandriva Free 2007, but the problem didn't dissapear. Maybe someone has found something that could help to resolve this issue? :unsure:

 

Do you have an intel motherboard? I believe there are several solutions, maybe use uuid, it could be that drives are given a random name and therefore it won't boot. Maybe someone a bit more experienced knows a little more....

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...