willie Posted May 5, 2006 Report Share Posted May 5, 2006 I have a Kodak C360 digital camera, i was thinking it would be mounted as a mass storage device. But it did not, i've looked in MCC, no camera. I found out that i've had to use SPCA5XX so i installed it en putt the SPCA5XX in modprobe.conf. In MCC i see now my camera, but there is no module conected to it. Digikam find a PTP-camera and i can open it, but digikam can't download the JPG files: error downloading JPG This is the output of lsusb [root@localhost willie]# lsusb Bus 003 Device 001: ID 0000:0000 Bus 002 Device 006: ID 040a:0589 Kodak Co. Bus 002 Device 005: ID 04a9:105c Canon, Inc. Bus 002 Device 004: ID 046e:3005 Behavior Tech. Computer Corp. Bus 002 Device 003: ID 03f0:1202 Hewlett-Packard Bus 002 Device 002: ID 03eb:3301 Atmel Corp. 4-port Hub Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 [root@localhost willie]# Can anyone help me Quote Link to comment Share on other sites More sharing options...
coverup Posted May 6, 2006 Report Share Posted May 6, 2006 Don't know if that's of any help... I browse my KODAK camera using konqueror. Connect the camera via USB, then open konqueror and type camera:// in the URL bar. Quote Link to comment Share on other sites More sharing options...
willie Posted May 8, 2006 Author Report Share Posted May 8, 2006 Nothing works, there is no mountpoint in /mnt. With GTKam( and Gphoto2) it works with USBfs but i wan't Digikam. Digikam find a PTP Camera but i can't dowload the pictures. Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted May 8, 2006 Report Share Posted May 8, 2006 If you do an: fdisk -l does it list the camera as /dev/sda1? Mine gets recognised as a disk and normally is /dev/sda1 and then mounted under /mnt/removable. Just a thought in case yours is being recognised this way, but not automatically mounted. Is HardDrake service running on your machine too or has it been disabled? Quote Link to comment Share on other sites More sharing options...
bvc Posted May 8, 2006 Report Share Posted May 8, 2006 bummer, my kodak cd33 works in ubuntu dapper in gthumb, but with problems. Once I get pics, or decide not to get pics, I can't go back in another session and get them even though they are still on the camera. Hope you get it working. Try gthumb. Quote Link to comment Share on other sites More sharing options...
willie Posted May 8, 2006 Author Report Share Posted May 8, 2006 The output of fdisk -l with camera [root@localhost willie]# fdisk -l Schijf /dev/hda: 40.0 GB, 40007761920 bytes 255 koppen, 63 sectoren/spoor, 4864 cylinders Eenheden = cylinders van 16065 * 512 = 8225280 bytes Apparaat Boot Start Einde Blokken Id Systeem /dev/hda1 * 1 1305 10482381 83 Linux /dev/hda2 1306 4864 28587667+ 5 Uitgebreid /dev/hda5 1306 1370 522081 82 Linux-swap / Solaris /dev/hda6 1371 4864 28065523+ 83 Linux [root@localhost willie]# fdisk -l with a cardreader [root@localhost willie]# fdisk -l Schijf /dev/hda: 40.0 GB, 40007761920 bytes 255 koppen, 63 sectoren/spoor, 4864 cylinders Eenheden = cylinders van 16065 * 512 = 8225280 bytes Apparaat Boot Start Einde Blokken Id Systeem /dev/hda1 * 1 1305 10482381 83 Linux /dev/hda2 1306 4864 28587667+ 5 Uitgebreid /dev/hda5 1306 1370 522081 82 Linux-swap / Solaris /dev/hda6 1371 4864 28065523+ 83 Linux Schijf /dev/sdb: 32 MB, 32113152 bytes 4 koppen, 32 sectoren/spoor, 490 cylinders Eenheden = cylinders van 128 * 512 = 65536 bytes Apparaat Boot Start Einde Blokken Id Systeem /dev/sdb1 * 1 1 0 0 Leeg Partitie 1 heeft verschillende fysieke/logische beginpunten (niet-Linux?): fys=(0, 0, 0) logisch=(0, 0, 1) Partitie 1 heeft verschillende fysieke/logische eindpunten: fys=(0, 0, 0) logisch=(33554431, 3, 32) Partitie 1 eindigt niet op een cylinder grens. /dev/sdb2 1 490 31344 5 Uitgebreid /dev/sdb5 * 1 490 31328 4 FAT16 <32M [root@localhost willie]# Quote Link to comment Share on other sites More sharing options...
willie Posted May 9, 2006 Author Report Share Posted May 9, 2006 Output of "# less +F /var/log/messages" May 9 16:47:47 localhost kernel: usb 2-1: USB disconnect, address 13 May 9 16:47:57 localhost kernel: usb 2-1: new full speed USB device using uhci_hcd and address 14 May 9 16:48:00 localhost hpiod: invalid uri:hp:/usb/PSC_1400_series?serial=CN54IB30Z204BN May 9 16:48:00 localhost PSC_1400_series?serial=CN54IB30Z204BN: INFO: open device failed; will retry in 30 seconds... and the output of dmesg usb 2-1: USB disconnect, address 11 usb 2-1: new full speed USB device using uhci_hcd and address 12 usb 2-1: USB disconnect, address 12 usb 2-1: new full speed USB device using uhci_hcd and address 13 usb 2-1: USB disconnect, address 13 usb 2-1: new full speed USB device using uhci_hcd and address 14 [root@localhost willie]# It seems that the camera is hcd Quote Link to comment Share on other sites More sharing options...
willie Posted May 12, 2006 Author Report Share Posted May 12, 2006 (edited) usb 2-1: new full speed USB device using uhci_hcd and address 14 If i do: $ /sbin/lsmod i don't see a module uhci_hcd. So the module isn't loaded into the kernel. But if i do # modprobe usb-uhci and then $ /sbin/lsmod i see a module uhci_hcd. Could this be the answer, i can't verify it because i'm at work. On my laptop at work is running Mandriva but i've forgot my camera Edited May 12, 2006 by willie Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted May 12, 2006 Report Share Posted May 12, 2006 I just checked on my system, and found it loaded, even when no devices connected. Here is my output: [root@europa ian]# lsmod | grep hcd uhci_hcd 29168 0 usbcore 108476 4 usbmouse,usbhid,uhci_hcd [root@europa ian]# cat /etc/modprobe.conf alias eth0 e100 install usb-interface /sbin/modprobe uhci-hcd; /bin/true # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF version 1.0.9 --- options snd device_mode=0666 alias snd-card-0 snd-intel8x0 alias sound-slot-0 snd-intel8x0 # --- END: Generated by ALSACONF, do not edit. --- alias net-pf-10 off as you can see, in my /etc/modprobe.conf I have a line relating to the usb interface. Do you have this in yours? Maybe you need to add it here, reboot, and see what happens. Just an idea. Quote Link to comment Share on other sites More sharing options...
willie Posted May 12, 2006 Author Report Share Posted May 12, 2006 install usb-interface /sbin/modprobe uhci-hcd; /bin/true isn't it enough to put usb-uhci in modprobe.preload Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted May 12, 2006 Report Share Posted May 12, 2006 No, this command works slightly differently and has to be in modprobe.conf. I don't know why, but it seems it's like this on all my Mandriva installs. I can only assume there is a reason for adding it in modprobe.conf rather than just adding uhci-hcd to modprobe.preload. Quote Link to comment Share on other sites More sharing options...
willie Posted May 12, 2006 Author Report Share Posted May 12, 2006 Uhci_hcd is loaded, i've added a line to fstab "none /proc/bus/usb usbdevfs defaults,auto 0 0" The camera is regonized by DigiKam as "USB PTP Class camera" but i can't download the photo's neither delete them, i don't see a preview either. Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted May 12, 2006 Report Share Posted May 12, 2006 I'm not sure you need to add the line to the /etc/fstab. When I connect my camera, it creates /dev/sda1 and points to /mnt/removable or something like this. I'll have to double check when I get home later, I'll connect the camera, and post the corresponding line for the /etc/fstab, etc, as I could be wrong, or it could be a combination of my fstab and some of what you added to yours. Quote Link to comment Share on other sites More sharing options...
willie Posted May 12, 2006 Author Report Share Posted May 12, 2006 I'm not sure you need to add the line to the /etc/fstab. When I connect my camera, it creates /dev/sda1 and points to /mnt/removable or something like this. That's a problem he doesn't creates a /dev/sda1 or something else. If i look in MCC i see that the camera has no module and it must be uhci_hcd, i believe. Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted May 12, 2006 Report Share Posted May 12, 2006 I'll be able to post back in about two hours, and let you know how mine get's recognised, both in mcc, as well as fstab settings, and others. Although my camera is different, the principal should be the same. Of course, unless someone beats me to it in the meantime :P Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.