Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by Echylo

  1. thx for your help, but(there is always a but :P ) it didn't worked, I think my writer is broken, always the same fixating error :(
  2. Echylo

    Good Gaming PC

    Must be lol. nah I think that 512 is plenty for todays game, maybe in a few months or years I should get a few more sticks of RAM. -Luis <{POST_SNAPBACK}> Well, how more RAM, how faster programs will compile... :) edit: and games ofcourse :P
  3. maybe a false cd, try to reburn it (at lower sp eed), and check md5 sums :) its probarly a bad cd(I/O error makes me think that)
  4. maybe this helps http://linux-universe.com/HOWTO/RPM-for-Unix-HOWTO-8.html
  5. hmm, I have founded a Linuxstarter book in a local bookshop, It included a red hat distro (think 8). But It didn't recognized my modem so I went working with windows again. After that I discovered the live cd's, and tried suse live cd, but it didn't worked with ntfs partitions so I had to config it always after a reboot, then I used Gentoo, but it was too difficult to install then. Then somebody told me about mandrake, I installed it, buyed me a new modem and that's about 3 weeks ago , haven't used windows since then :D
  6. no I tried first Audio only, that cd worked fine. Then I tried another audio cd, but it didn't want to fixate(cd was larger though). After that I tried to burn an image, but again I had the fixate problem
  7. there are config tweaks who boost the performance off the game, If you unpack the pk4 files, and you delete the pk4 files then, it will boost performance, but It will take longer to load a level. And in cfg file, you have to put something to 256 (think its cachemem or something) and it will boost too !!!
  8. no didn't changed anything, It interrupts when it starts fixating. Is the cdwriter broken?
  9. I tried to burn cd(an audio and an image) but I always have the same error : Unknown error 254 Debugging report : System ----------------------- K3b Version: 0.11.6cvs KDE Version: 3.2 BRANCH >= 20040204 QT Version: 3.2.3 cdrecord ----------------------- scsidev: '/dev/ide/host0/bus1/target1/lun0/cd' devname: '/dev/ide/host0/bus1/target1/lun0/cd' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (warly-scsi-linux-sg.c-1.80-mdk '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright © 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <warly@mandrakesoft.com>. Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 8100 ' Revision : '1.0g' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO Drive buf size : 1040128 = 1015 KB FIFO size : 4194304 = 4096 KB Track 01: data 700 MB Total size: 804 MB (79:39.33) = 358450 sectors Lout start: 804 MB (79:41/25) = 358450 sectors Current Secsize: 2048 ATIP start of lead in: -11607 (97:27/18) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 18 Manufacturer: Plasmon Data systems Ltd. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 1399 Starting to write CD/DVD at speed 4.0 in real TAO mode for single session. Last chance to quit, starting real write in 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 Performing OPC... Starting new track at sector: 0 Track 01: 0 of 700 MB written. Track 01: 1 of 700 MB written (fifo 100%) [buf 87%] 5.9x. Track 01: 2 of 700 MB written (fifo 100%) [buf 99%] 4.1x. .... Track 01: 696 of 700 MB written (fifo 100%) [buf 99%] 4.1x. Track 01: 697 of 700 MB written (fifo 100%) [buf 99%] 4.2x. Track 01: 698 of 700 MB written (fifo 100%) [buf 99%] 4.1x. Track 01: 699 of 700 MB written (fifo 100%) [buf 98%] 4.2x. Track 01: 700 of 700 MB written (fifo 100%) [buf 99%] 4.1x. Track 01: Total bytes read/written: 734101504/734101504 (358448 sectors). Writing time: 1200.390s Average write speed 4.0x. Min drive buffer fill was 87% Fixating... /usr/bin/cdrecord: Success. close track/session: scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 02 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 93.681s timeout 480s cmd finished after 93.681s timeout 480s /usr/bin/cdrecord: Cannot fixate disk. Fixating time: 93.687s /usr/bin/cdrecord: fifo had 11563 puts and 11563 gets. /usr/bin/cdrecord: fifo was 0 times empty and 11438 times full, min fill was 93%. cdrecord comand: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/ide/host0/bus1/target1/lun0/cd speed=4 -dao -eject -data /home/ghost/Documents/SUSE-9.1-personal-x86.iso
  10. Echylo


    strange, now It works, installed kernel source, and the packages lmule needed worked now, and lmule works just fine :)
  11. Well, I can translate from English to Dutch, School says I have to know German, but yea, :unsure: that's a problem ;)
  12. Hi, I installed apache on mandrake, and it works fine on my lan, so (http://localhost). But when I try to connect to my ip, it shows me my router config. Now I did some research and I managed a way to open the port 80, using NATP. I had to set a inside adress, and a outside adress. So I set the inside adress to my ethernet card, and my outside has to be zero, cause it's dynamic ip. Now when I do that, and I try again it time-out on the ip (so the config won't appear anymore on my ip, only when i acces via Now can somebody help me with that?
  13. Echylo

    modem installation.

    hmm try this order ./configure make make install make clean
  14. I have the same book :), but a dutch translation, well I think C++ is good to start with, it's actually based on C, but i has classes, nothing you have to worry about now :)
  15. Echylo


    hmm, can't find any rpm for gtk+ or glib, and Lmule rpm needs gtk, so yea there is a reason why i wanna compile it :)
  16. Echylo


    hi, I wanna install lmule (p2p) client, but it says I need gtk+/glib. I donwload those, and first have to compile glib, so I did. But when I try to compile gtk+, it says I don't have a recent version of glib, so my question , did I do anything wrong while compiling it?(./ configure -> make -> make install ).
  17. hmm wordperfect, when I see the word, I think at windows 3.1 which is not a good memory, im happy with open office, already used in windows btw
  18. hmm I'm filled in the questionnaire too, still no sign of a packet, think it will never arrive :(
  19. yea totem works fine, but its not that cool :P, but I'll work with noatun, good player too although it crashes sometimes///
  20. Echylo

    Can't login! Help!

    if the screen shakes a bit, it means your password is wrong :)
  21. I installed the rpm from the cd, used soundwrapper command, but it still freezes...
  22. ok :) my love for linux is growing each minute :D
  23. are there actually any "dangerous' virusses for linux?
  • Create New...