sorocco

are you able to see the SSID broadcast ?..

Is your Linux actting as router/firewall ?..if not why dont you connect your modem/router to linksys and from there connect eth0 and other pc's..you should be having 4 port with your linksys ? anyway ..this is for what you are trying to do: use static ip on both the ethernet's on linux.i saw you are using 10.0.0.0/8 .why ?.... you can use 10.0.0.0/24 on eth1. now give 192.168.1.X to your eth0 with mask 255.255.255.0 and default gateway 192.168.1.1 ( if this is your router's IP ) for eth1, give 10.0.0.1 ,255.255.255.0 default gate way as 192.168.1.1 (should be same as on eth0) enable NAT ipforwarding and i am sure this will work. if not pls. post ifconfig -a and route. Greetings,

ok.. i have done like this .. my dsl modem/router--->>linksys access point---->>linux box and winx px from linux i am from three NIC as eth0 connected to linksys , adn eth1 connected to switch for other neteork 10.0.0.0/24 and eth2 is for 172.120.0.0/24 connected to VOIP gizmo.. see my ifconfig eth0 Link encap:Ethernet HWaddr 00:E0:4C:15:40:43 inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:4cff:fe15:4043/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:908320 errors:0 dropped:0 overruns:0 frame:0 TX packets:678639 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1158851933 (1105.1 Mb) TX bytes:82552179 (78.7 Mb) Interrupt:3 Base address:0xc400 eth1 Link encap:Ethernet HWaddr 00:E0:4C:10:06:7D inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:4cff:fe10:67d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1001 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:238123 (232.5 Kb) Interrupt:5 Base address:0xc800 eth2 Link encap:Ethernet HWaddr 00:E0:4D:77:78:11 inet addr:172.20.0.1 Bcast:172.20.0.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:4dff:fe77:7811/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:6128 errors:0 dropped:0 overruns:0 frame:0 TX packets:4665 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1254537 (1.1 Mb) TX bytes:695035 (678.7 Kb) Interrupt:11 Base address:0xe000

ok.. but for different network ...pls. note I Mean DIFFERENT NETWORK ie. eth0 192.168.1.0/24 and eth1 is 10.0.0.0/24 now what will be GW ..??/

thanks .. i was looking for ssh its already installed

hi all, can anyone pls let me know what package i need to install for ssh in mandrake 10.1 ..like putty or other good one thanks

i am not sure whether i am having PUTYY or not with my mandrake 10.1 so tried ro install it by command "urpmi putty" but no package named putty . means putty isnt available with mandrake ? thanks

thanks for your repply .. Say i am having two NIC , eth0 with 192.168.2.2 with 255.255.255.0 and connected to 192.168.2.1 ( so this will be the gateay for eth0 but... eth1 ? ) and the second NIC eth1 10.0.0.1 with 255.255.255.0 so what will be the gateway on these NIC's ?...

will you pls post your ifconfig -a and explain the procedure you followed..i am having same kind of problem .. Thanks

thax greg2 .. right now i am not able to get you completly ..but its a nice explanation.

hello. i am with mandriva 10.1 trying to set/share my printer which is connected to windows xp pro ....pls advice how to do ..right now i am able to see my linuxbox from win xp and vice versa.. thanks

thax.. its working now ..so every time i have to add this -I in command ..???

you can see from log ..i am able to ping from my mandrake box but not traceroute ..and i can browse the net too.. with no problem at all....at the same time my windows xp machines are doing tracert ...why not mandrake ..???....i am reaching my default gateway (dsl modem/router ) but after gateway just stars..

hello.. I am ON mandrake 10.1 , just installed few days back and it is now connected in my lan with 2 pc;s (windows xp pro ), my problem is when i try to give command traceroute any_WAN_IP ...it shows my adsl modem/router as first hoope and than ..*** ..for next forthcomming 30 hops. at the same time i am getting response from my windows pc no problem at all....ii am able to ping the same IP ..no DNS probllem ...any idea about this ? my lan connection is as : adsl modem/router (192.168.1.1 )--->> linksys access point (192.168.2.1) acting as DHCP --->> PC!,PC2 and Mandrake PC all the PC's are on DHCP. see the logs .. traceroute: unknown host google.comm [root@localhost root]# traceroute google.com traceroute: Warning: google.com has multiple addresses; using 72.14.207.99 traceroute to google.com (72.14.207.99), 30 hops max, 38 byte packets 1 192.168.1.1 (192.168.1.1) 1.541 ms 1.082 ms 1.048 ms 2 * * * 3 * * * 4 * * * [root@localhost root]# ping google.com PING google.com (64.233.187.99) 56(84) bytes of data. 64 bytes from jc-in-f99.google.com (64.233.187.99): icmp_seq=2 ttl=237 time=383 ms 64 bytes from jc-in-f99.google.com (64.233.187.99): icmp_seq=3 ttl=237 time=383 ms 64 bytes from jc-in-f99.google.com (64.233.187.99): icmp_seq=4 ttl=237 time=384 ms Thanks