seanmckinney Posted May 31, 2008 Report Share Posted May 31, 2008 (edited) OK 2 PC's both dual boot XP/mandrake 10.1. I have a working network when both PC's are running XP, but when one PC is running XP and the other PC is running Mandrake or when both PC's are running Mandrake I DO NOT have a fully working network. In the mandrake to XP networks and the mandrake to mandrake network I can ping by IP address successfully but I CAN NOT ping by PC name. The IP addresses are "static"? on both PC's with one being 192.168.0.1 and the other being 192.168.0.2 . I am not certain what to set the "DNS server" addresses to and I seem to be getting differnet opinions over what I should set as DNS server addresses. I would like the names of the PC's to be, for 192.168.0.1 Mk3, and, for 192.168.0.2 Mk2. Curiously from the PC running XP, currently this one i.e. Mk2, I can see and read the contents of a 'shared' directory on the PC running Mandrake BUT I CAN NOT see anything of the XP PC on the Mandrake PC. I attempted to set up and or use Samba but its use 'crashed' when it couldnt find 'the other' PC by name. Going from what I can see on XP, XP setup a network by the name of Mshome, Mandrake set up a network by the name of Mdkgroup. I am obbviously faling to understand something in the network setup process and would be grateful if some one would walk me through it. Thanks Edited May 31, 2008 by seanmckinney Quote Link to comment Share on other sites More sharing options...
Guest kanoner Posted May 31, 2008 Report Share Posted May 31, 2008 Hi. Isn't 192.168.0.1 reserved for the router? And why use Mandrake 10.1 and not 2008? Are you sure you don't have the same IP on both machines when running mandrake (IP conflict)? Also in XP you can see which dns server you should use by setting dynamic IP (recieve automaticly) and checking "ipconfig /all" in cmd. (Start --> run --> cmd -- ipconfig /all). Alternativ in mandrake as root "ifconfig" in a console window. Quote Link to comment Share on other sites More sharing options...
seanmckinney Posted May 31, 2008 Author Report Share Posted May 31, 2008 (edited) Hello kanoner Thanks for replying Re "Isn't 192.168.0.1 reserved for the router?" -------I wouldn't know but I could easily change the address settings if needs be. Besides which, if significant they are currently connected via a cross over cable although I do get the same results if I connect them via a router "why use Mandrake 10.1 and not mandrive 2008?" ----------I have 10.1 on a dvd. I'd have to buy 2008 and money's tight at the minute, the download would take me 3hr+ for each CD, I have had a look. I'd prefer cd's as I only have 1 dvd reader and swapping it about is becoming tiresome. "Are you sure you don't have the same IP on both machines when running mandrake (IP conflict)?" ----------No conflict I can ping 192.168.0.1 and 192.168.0.2 "Also in XP you can see which dns server you should use by setting dynamic IP (recieve automaticly) and checking "ipconfig /all" in cmd. (Start --> run --> cmd -- ipconfig /all). Alternativ in mandrake as root "ifconfig" in a console window" --------I'll go and do that now heres the current state of play as reported by XP on 192.168.0.2 I have deleted the web IP incase that's a risk Windows IP Configuration Host Name . . . . . . . . . . . . : whitehouse-mk2 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Mixed IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No PPP adapter Speedtouch Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : xxx.xxx.xxx.xxx Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : xxx.xxx.xxx.xxx DNS Servers . . . . . . . . . . . : 195.92.195.94 195.92.195.95 Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NVIDIA nForce MCP Networking Controller Physical Address. . . . . . . . . : 00-E0-4C-A8-97-8D Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.4 10.0.0.6 this is the linux output from 192.168.0.1 eth0 Link encap:Ethernet HWaddr 00:16:EC:13:62:BD inet addr:192.168.0.1 Bcast:195.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:ecff:fe13:62bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:77 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9614 (9.3 Kb) TX bytes:8250 (8.0 Kb) Interrupt:10 Base address:0xe400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:118 errors:0 dropped:0 overruns:0 frame:0 TX packets:118 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8632 (8.4 Kb) TX bytes:8632 (8.4 Kb I see one 'problem'(is it a problem?) immediately the broadcast address is wrong..............now that's interesting on the mandrake pc I can ping 195.168.0.255 ........... trying to ping 195.168.0.anything times out on the XP machine Edited May 31, 2008 by seanmckinney Quote Link to comment Share on other sites More sharing options...
{BBI}Nexus{BBI} Posted May 31, 2008 Report Share Posted May 31, 2008 (edited) Download Mandriva One 2008.1. It's a single cdrom. It will run as a live cd or you can opt to install it from the desktop. You can add the repositories (sources) later to give you full access to available extra software. 10.1 is really old (and probably no longer supported), you may have a smoother experience using a more current version. It's available here: http://www.mandriva.com/en/linux/ Also it might be better to leave things on Auto discovery until you get the networking sorted, you can assign fixed ips after. Edited May 31, 2008 by {BBI}Nexus{BBI} Quote Link to comment Share on other sites More sharing options...
seanmckinney Posted May 31, 2008 Author Report Share Posted May 31, 2008 (edited) Thanks and ultimately I will get an up to date OS but that wouldnt necessarily teach me anything, solving this problem would, and I tend to learn more by fixing things than have them go smoothly This is XP's out put with DHcp enabled Windows IP Configuration Host Name . . . . . . . . . . . . : whitehouse-mk2 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Mixed IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NVIDIA nForce MCP Networking Controller Physical Address. . . . . . . . . : 00-E0-4C-A8-97-8D Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 169.254.81.178 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : PPP adapter Speedtouch Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 84.67.209.119 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 84.67.209.119 DNS Servers . . . . . . . . . . . : 195.92.195.94 195.92.195.95 with both PC's setting their own dhcp I aam not sure whats happening this is the ifconfig for linux eth0 Link encap:Ethernet HWaddr 00:16:EC:13:62:BD inet6 addr: fe80::216:ecff:fe13:62bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:31 errors:0 dropped:0 overruns:0 frame:0 TX packets:17 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5159 (5.0 Kb) TX bytes:4482 (4.3 Kb) Interrupt:10 Base address:0xe400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:162 errors:0 dropped:0 overruns:0 frame:0 TX packets:162 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12164 (11.8 Kb) TX bytes:12164 (11.8 Kb) Edited May 31, 2008 by seanmckinney Quote Link to comment Share on other sites More sharing options...
seanmckinney Posted May 31, 2008 Author Report Share Posted May 31, 2008 (edited) Ahh the problem has become irrelevant, the older mo bo just threw up its head in disgust at the abuse and died, the remaining backup pc's run pentium II and it isnt worth the bother of trying to network linux on them. I'll stick with a microsoft network. Thanks anyway Edited May 31, 2008 by seanmckinney Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted May 31, 2008 Report Share Posted May 31, 2008 Shame you give up to easily. Quote Link to comment Share on other sites More sharing options...
seanmckinney Posted May 31, 2008 Author Report Share Posted May 31, 2008 (edited) Shame you give up to easily. I've been trying for a week and I haven't much hair left but there's less steam coming out of my ears now as I have found a Abit KR7 mo bo in the attic. So Ian if you have some answers to the problems I have encountered I'd be grateful to 'hear' them. Edited May 31, 2008 by seanmckinney Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted June 1, 2008 Report Share Posted June 1, 2008 OK 2 PC's both dual boot XP/mandrake 10.1. I have a working network when both PC's are running XP, but when one PC is running XP and the other PC is running Mandrake or when both PC's are running Mandrake I DO NOT have a fully working network. In the mandrake to XP networks and the mandrake to mandrake network I can ping by IP address successfully but I CAN NOT ping by PC name. The IP addresses are "static"? on both PC's with one being 192.168.0.1 and the other being 192.168.0.2 . I am not certain what to set the "DNS server" addresses to and I seem to be getting differnet opinions over what I should set as DNS server addresses. I would like the names of the PC's to be, for 192.168.0.1 Mk3, and, for 192.168.0.2 Mk2. To ping by name you would have to add to /etc/hosts all the machines - or alternatively run your own DNS server for your internal machines with external addresses being resolved by a DNS forwarder configured in your DNS server. However, if you're a beginner, just adding the machines to /etc/hosts on all machines is enough and quicker. Curiously from the PC running XP, currently this one i.e. Mk2, I can see and read the contents of a 'shared' directory on the PC running Mandrake BUT I CAN NOT see anything of the XP PC on the Mandrake PC. I attempted to set up and or use Samba but its use 'crashed' when it couldnt find 'the other' PC by name. Make sure when you configured samba that you have the same workgroup configured between Windows and Mandrake, so that they can be accessible easily enough. You can also use lisa as a Network Neighbourhood type browser - or just open konqueror for KDE or nautilus if you're using Gnome and type smb:// to gain access to browsing the possible machines to connect to. I believe that helps answer your problems. Quote Link to comment Share on other sites More sharing options...
seanmckinney Posted June 1, 2008 Author Report Share Posted June 1, 2008 (edited) Thanks Ian, unfortunately the Abit board wasnt working reliably so I will have to dig out and even older PC to try the network on, your help is appreciated though. 350 pentium II here we come..... Edited June 1, 2008 by seanmckinney Quote Link to comment Share on other sites More sharing options...
seanmckinney Posted June 1, 2008 Author Report Share Posted June 1, 2008 (edited) BINGO :D :D :D many thanks Ian. Edited June 1, 2008 by seanmckinney Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted June 2, 2008 Report Share Posted June 2, 2008 Glad it's sorted Quote Link to comment Share on other sites More sharing options...
tyme Posted July 11, 2008 Report Share Posted July 11, 2008 (edited) sean: please do not double post problems. one problem = one thread. mod or admin: please close this topic: https://mandrivausers.org/index.php?showtopic=59834 Edited July 11, 2008 by tyme Quote Link to comment Share on other sites More sharing options...
Greg2 Posted July 11, 2008 Report Share Posted July 11, 2008 Thanks, tyme. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.