joaopa Posted November 8, 2006 Report Share Posted November 8, 2006 Since I upgraded my laptop with mandriva 2007, laptop shutdowns often with the message that cpu has 89° degrees Celsius. It is weird because, with Mandriva 2006, I never had this problem. And with my dual-boot, my laptop works fine. So, it is a problem with my mandriva 2007 and/or my configuration. I checked that acpi is checked in service. CPUFREQ is also checked. CPUfreqd is also checked but is stopped... Click on Start dors not change its state.... My problem occurs mainly when I compile wine, since CPU is loaded a lot..... Anyone has an idea to solve my problem? Joaopa Quote Link to comment Share on other sites More sharing options...
emmanuel_uk Posted November 8, 2006 Report Share Posted November 8, 2006 look into lm_sensors; maybe the formula is wrong there for T calculation. Also as soon as 89 C shutdown occurs you could go in bios and read the real T for reference Quote Link to comment Share on other sites More sharing options...
joaopa Posted November 9, 2006 Author Report Share Posted November 9, 2006 Thanks for the tip. I had just installed lm_sensors. But I don't know how to use it... Any help would be nice Thanks in advance Joaopa Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted November 9, 2006 Report Share Posted November 9, 2006 Usually after install, it tells you to run sensors-detect, did you not see this bit of information? See this post, after I did a search on this forum: https://mandrivausers.org/index.php?showtop...amp;mode=linear all you need to know. Google is also a nice place to start if you're not sure what to do!!! Quote Link to comment Share on other sites More sharing options...
emmanuel_uk Posted November 9, 2006 Report Share Posted November 9, 2006 laptop shutdowns often with the message that cpu has 89° degrees in a terminal tail -f /var/log/syslog or /var/log/messages or tac /var/log/syslog | less would help to identify which services decides to shut down your system or what the exact messages is What laptop by the way? What model? Tosh and IBM have special kernel modules, so maybe T reading happens even without lm_sensors, not sure. (for example /proc/acpi/ibm/thermal or whatsnot) So I think you have some routes to explore, it is best to come back when you have more info and having done extra searches, so we all have a better idea of what is going on (my 2 cents) Quote Link to comment Share on other sites More sharing options...
tyme Posted November 9, 2006 Report Share Posted November 9, 2006 If the CPU is reaching 89C, then they system should be shutting down. However, a temperature this high would likely be very noticeable on the laptop casing - see if you can feel any uncommon heat. If it's not actually reaching 89C, then it's definitely an issue with the sensors on your system. Are you sure you should be using acpi? Some systems use apic, IIRC, but it's different from one to the next. You should be able to check what your system uses in your BIOS. Quote Link to comment Share on other sites More sharing options...
joaopa Posted November 12, 2006 Author Report Share Posted November 12, 2006 Here is the /var/log/syslog after the 120000000000000000-th reboot of my laptop Moreover lm-sensors doesn't work. It complains about that /sys is not mounted, although I have the following line in my /etc/fstab none /sys sysfs defaults 0 0 . I become crazy Joaopa Quote Link to comment Share on other sites More sharing options...
coverup Posted November 12, 2006 Report Share Posted November 12, 2006 Make sure speed stepping / frequency throttling modules and daemons such as speedstep-centrino, powernowd, cpufreqd or similoar, are loaded and running. If that's not done, the kernel will run the CPU at full speed all time, even if the CPU is not loaded. This will draw a lot of power, and turn the laptop hot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.