ttellefsen Posted January 10, 2004 Report Share Posted January 10, 2004 I have a WUSB 11 V2.6 instant network device and cannot seem to get it to work. I have read the postings dealing with this issue and tried to follow the directions verbatim with no avail. I am using MDK 9.2. I have installed the wireless tool package and the USB view package. I have downloaded at76c503a.tar.gz. I cannot seem to get through the Make and Make install steps without two errors and I really do not understand symlinks (new to Linux). Would someone be able to provide a step by step procedure for doing this? Couple of issues that I found; in lib/modules, I have two directories one is 2.4.22-10mdk and the other is 2.4.22-1mt. Could this be the problem? Quote Link to comment Share on other sites More sharing options...
ttellefsen Posted January 10, 2004 Author Report Share Posted January 10, 2004 Okay after much trouble I was able to get the WUSB11 working. Now, two more issues that maybe someone could help with. First: The machine takes 3-4 times to boot and from the bootup info, it seems to hang at the detecting new hardware prompt. This is a portion of the dmsg where it looks like the error might occur. hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers Adding Swap: 506008k swap-space (priority -1) mice: PS/2 mouse device common for all mice at76c503.c: Generic Atmel at76c503/at76c505 routines v0.11beta4 usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.11beta4 usb.c: registered new driver usbdfu at76c503-rfmd.c: Atmel at76c503 (RFMD) Wireless LAN Driver v0.11beta4 usb.c: registered new driver at76c503-rfmd ********************** REASSOCIATION RESPONSE ********************** ********************** REASSOCIATION RESPONSE ********************** SCSI subsystem driver Revision: 1.00 hdd: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: IDE-CD Model: R/RW 4x4x32 Rev: C1.7 Type: CD-ROM ANSI SCSI revision: 02 hdc: attached ide-cdrom driver. hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.4a [Flags: R/O MODULE]. NTFS volume version 3.1. inserting floppy driver for 2.4.22-10mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray usb.c: registered new driver usbmouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver ********************** REASSOCIATION RESPONSE ********************** es1371: version v0.32 time 12:41:33 Sep 18 2003 es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x09 es1371: found es1371 rev 9 at io 0xec00 irq 18 es1371: features: joystick 0x0 ac97_codec: AC97 Audio codec, id: CRY19 (Cirrus Logic CS4297A rev A) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: Printer, Hewlett-Packard OfficeJet Series 700 lp0: using parport0 (polling). Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 0 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 1 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 2 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 3 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 4 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 5 changed to on The second item is about wep key for the device. I read the iwconfig man and it looks as though it does not support 128 bit encryption (26 character key). I only saw 64 bit which is 10 character in the following form xxxx-xxxx-xx. Is this known? The unit would only work when I took encryption off or disabled the key. Again thanks for your help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.