Jump to content

Trio3b

Members
  • Content Count

    260
  • Joined

  • Last visited

Everything posted by Trio3b

  1. Sorry, I had been using MDV 2008.1 for many years and never figured this out. As far as connectivity issues, I had it (mdv 2005/2008.1) on numerous hdwr and it generally seemed to be dependent on the specific hdwr although I am a desktop user and had little use for w/l until recently. Currently running pclos 2012.12 and I had never any need for w/l until I loaded it onto a netbook, but as mentioned, font is so tiny on these devices, I missed the "network profiles" configuration in the Control Center. Apparently, if you configure (in MCC) your hdwr to connect in the net and internet "add a new connection" then connect, then go to "profiles" and add the current configuration, it will save it until the next time the hdwr "sees" that network and will either autoconnect or if not you can open the MCC/PCC and activate that profile. This is mandatory when using WEP or WPA due to password requirements. However, it appears that if you have at least ONE open network configuration saved in these profiles, then the device should pick up ANY open network and drakconnect should display that in the tray. Am still evaluating all these assumptions and will post back when confirmed. Thanks
  2. That did not seem to be working for me. That's what I get for having a netbook (tiny font). Did not see the "setup network profiles" in MCC> internet and networking. Apparently you connect and name the profile and it saves the configuration for that particular setup similar to what you describe. Am going to check this out for the next week or so then mark solved if it fixes issue. Thanks
  3. This should be simple but.... search always turns up posts and howtos regarding access point roaming within the same network or using different wifi adapters or other complicated dhcp, DNS stuff. I want one laptop with the same wifi adapter (internal) to connect to : 1. Home net (wpa pre-share key) 2. Library net (open) 3. coffee shop net (open) 4 friends net (wep- password) (obviously not at the same time) whenever I go there. Seems I have to delete the interface and re-enter each network's configuration in network center or in tray icon as I move from one network to the next over the course of several days. i might not go to coffee shop for two weeks or Library for a month but I want the connection there when I need it. Doesn't drakconnect have a profile saved somewhere? Once I set up each network I would like it that whenever the network I want shows up I can just click on it and it connects me? Am I missing something simple? Thanks
  4. [uPDATE] Sorry about the long delay in response and thanks for the replies. If interested in what may have happened to possible resolve this, read on. If not, no problem. Yes I had run memtest ( 3 passes) then reseated mem and ran for another 2 passes all OK. I had come to the conclusion that any xorg-server version > 1.6.5 was causing issues b/c any distro with newer xorg server gave me these " kick off" GUI console onto a black screen. (I was slamming Mint12,13, Mageia, MDV and several versions of PCLOS on to the lappy and what they all had in common was xorg-server>1.6.5) . This seemed confirmed when I loaded PCLOS 2010 ( with xorg-server = 1.6.5) and ran this lappy with no issues for the past 2 months with no more blackscreens, all hunky-dory and was settled in to use this laptop indefinitely. So, recently and co-incidentally found several issues that could either have been a direct cause to the original problem or interrelated somehow. 1. Turns out that the RTC battery in this Toshiba A305 was failing but only slightly. ( An hour over several weeks so it was almost imperceptible) In the past this has only caused annoyance issues with keeping correct time, however, is it possible that the RTC failure was causing BIOS settings issues such as external monitor settings that was causing the graphics to freak out? 2. Since pclos 2012.12 was running fine on several laptops, I decided to try using the original pclos 2012.12 LiveCD disk on a desktop and I got media error. Checked media and sure enough it failed. PLZ keep in mind that this iso passed md5sum and pretty sure I checked media initially but can't verify as notes were hurrried. Even tho the media failed, it did not register to me that this could have been a problem b/c I was pretty sure I had used this particular media to load pclos 2012.12 on to 2 Compaq CQ50s, a Toshiba C655 and two Tosh netbooks. with no problems - so why suspect the disc? Well, turns out that the netbooks were loaded via USB/SD card and the other 3 full size laptops may have been pclos2010 upgraded ( I am looking into that now). This would mean that the Toshiba A305 with all the issues may have been the only hardware that got loaded with the "tainted" pclos2012.12 disc. As of 7-7-12 I have replaced RTC battery. It was soldered to MB so I did have to disassemble everything and blow it all out. I was worried that the RTC charging circuit was bad but so far time is maintained. Also, burned a new pclos 2012.12 LiveCD from the ORIGINAL .iso, and so far this Tosh A305 has not "bumped off" into black screen. I have not installed yet but plan to within the next few weeks and will report back. In conclusion, I still can't point to an exact cause but the combination of bad hdwr (RTC) and bad media seems to have been a likely culprit. I cannot mark solved yet as I want to install and run this hdwr/sftwr combo hard for a couple months, I have installed MDV and many other distros many many times since 2005 and never ran across this combination of gremlins. This thing has eaten my lunch since summer of 2011. Wow ! Thanks for the help
  5. OK, two updates here. I was mistaken with "about:plugins" In FF >tools>addons>Plugins I see Shock In "about:plugins" I see Shock and FutureSplash which is apparently the renamed version of FlashPlayer from Adobe. I have the KDE > settings > network connectivity> Adobe Flash settings, but on the Adobe website there is supposed to be an actual control panel to adjust settings but nothing there. Also, I have no links to specific sites, but I don't seem to be able to play anything on youtube or metacafe and any "check flash" websites whether Adobe or otherwise show nothing- no version numbers, no spinning monkeys, nothing. Sorry I don't have exact numbers but we are talking about Mageia 2 KDE running FF10/11 and Flash(FutureSplash) 11.2.xxx.xx. There are two recommended installers (scripts I guess) in MGA repos which then download the flash from the Adobe site and install for the user.Someone over in Mageia said he had not updated the MAQeia for MGA2, so maybe the script is installing a new version of flash that is incompatible with FF. There seems to be chatter over in PCLOS forums about issues with latest Flash and FF versions being incompatible. Read somewhere that someone downloaded ALL archived releases of flashplayer, extracted libflashplayer.so and started plugging them in until he got one to work! Quite dedicated. I will say that I uninstalled Flash and installed gnash, an alternative, but video is choppy and can only get 240p with audio. 360p is choppy with no audio. There is someone on pclos forums who calims it is the Radeon 9250 card causing the issues, however all my desktop effects are rocking along fine so why wouldn't it like flash? ( I did try to watch content with effects disabled - no go) Apparently this is the last version of Adobe Flash for Linux. Maybe this is their way of discouraging. Stumped for now Thanks
  6. Yes. Tried recommended method according to MAQeia. Also tried installing outside of repos, also tried gnash. Flashplayer control center shows up in KDE settings manager and there is libflashplayer.so in /usr/lib/mozilla/plugins but Adobe site indicates no flash installed and about:plugins in FF indicates none installed.
  7. Sorry if in wrong forum but thought the Mageia forum was just for general chat so here it is, Mageia 2 KDE running FF 10.0.4. flash content does not even play. Either "plugin needed" or black windowbox. Enabled non-free repos as recommended. Apparently MGA has scripts flash-player-plugin and flash-player-plugin-kde that download and installs Adobe Flash ( v. 11.2.xx.x) but FF recognizing it as Shockwave. When I install these plugins, Adobe flash control center is indeed added to KDE control center and there is a libflashplayer.so found in /usr/lb/mozilla/plugins, However no flash content can be seen and Adobe "test flash version" site shows nothing installed. about:plugins- shows nothing installed FF>tools>addons> shows only Shockwave have tried gnash (flash alternative) but videos are choppy. I thought it might be ATI radeon 9250 graphics but all desktop effects fine. tried watching video with effects disabled but still no content Have read here and other forums about Adobe flash being 64 bit and FF being 32 bit. so it being incompatible but I know flash was working in MDV2008.1 and currently in PCLOS 2010 and 2012 so somehow they got it going. Any help appreciated
  8. Unfortunately my experience has been the opposite: Printerdrake has detected and installed many printers for me over the years whereas installing andd configuring printers from CUPS has been difficult. Thanks Unfortunately I cannot get CUPS to accept any username or password including root so checked in /etc/cups.Some where along the line, the ppd file for the Samsung got renamed Samsung.xxx.ppd.old and a new file got put in place. Once I removed the new file and removed the ".old" suffix all was well. Don't know what happened b/c used to have quick PDFs with Samsung but still suffering slow PDFs compared to the Brother multi-function but that is for another thread. Thanks
  9. USB connected Samsung ML-2151N mono-laser printer was automagically installed on PCLOS 2010 on Toshiba A305 laptop via printerdrake and has been fine for about 2 months with all apps except PDF's which have been slow but I did nothing about it until now, so I tinkered with some GUI settings and printer now no longer prints. This printer has been automagically recognized and operational for years on MDV 2005LE, 2008.1, and most recently on a desktop with PCLOS 2009.1 and the Tosh laptop with PCLOS 2010. 1. A Brother DCP7020 prints quickly including pdf's on the Tosh laptop (pclos 2010). 2. The Samsung prints fine including quick pdf's on two desktops (MDV2008.1) and another desktop with PCLOS 2009.1. Preface: Samsung shows up in lsusb on Tosh laptop I generally hard cycle the printer and reboot after all the following procedures: 3. So now let's just stick with Samsung on Tosh laptop. Removed printer and reinstalled via PCC. Samsung is installable via printerdrake via PCC and then seen by CUPS and shows up in application print dialogues- but no printing 4. Removed printer again via printerdarke- tried reinstalling via CUPS - no go - CUPS admin in browser accepted root username/ password ONCE but no longer will accept any combination of username and psswd. Have read threads about adding cupsys, lpadmin to /etc/group. etc etc. Should not have to do this.(sorry but don't think much of CUPS web administration, never have, and neither do others) BTW, I CAN delete printer from printerdrake but CANNOT delete it from CUPS once it has been installed via printerdarke (PCC), so deleted printer again via PCC printerdrake. 5. Installed Samsung unified linux driver which installs fine but then "add printer" does not recognize its own printer. I must have altered something in trying to solve slow pdf's ( 1 page every 2-3 minutes) but don't know what I did. Can't figure why Samsung shows up in lsusb, printerdrake, CUPS and application dialogues, but no printing from ANY app, including printerdrake test pages. Final clue:(I believe CUPS is showing this USB connected printer on a parallel port) Related question: Why does task-printing package show up as installed but size is 0 bytes in synaptic? The Brother DCP all-in-one mono-laser is working fine on the Tosh so I guess task-printing must be installed and working? Yes? Any ideas appreciated
  10. KDE 4.6.5 on PCLinuxOS 2012 ( 2.6.38-8) on Toshiba A305 videocard Intel Mobile 4. This software runs fine on a Compaq CQ50 with same graphics card.default install wants to use i810 and later driver, specifically i915 Random xserver crashes - black screen/ working mouse- BEFORE and after login and during sessions. Cannot reproduce but has happened over the past few months about every 5th login and every 2 hrs when in a session. Many various error messages in /var and in .xsession-errors- too many to list but mainly regarding DBus disconnecting or cannot be connected. Things tried: -With and without desktop effects enabled -Intel and Xorg drivers -with and without xorg.conf (this seems to provide best results) -Different kernels (pae,bfs, slightly older, slightly newer including latest) -adding i915.modeset=1 to boot option -delete ~.kde -Adding Terminate server="True" to kdmrc After a crash Ctrl+Alt+F(1-6) gives terminal. can login but cannot startx - error is either "xserver already running" or "cannot connect to server" Ctrl+Alt+F7 gives me a text boot screen hung at "starting display manager" Ctrl+ Alt+F8 returns me to the GUI session with all apps open as if nothing happened If I hit CTRL+Alt+Bckspc immediately after crash I get GUI login. If after I launch another terminal session, it does nothing. Any ideas appreciated. [moved from Software by spinynorman]
  11. Basically use the PC for business and rely on: OO (or LO if available for mdv 2008.1) need to upgrade grsync (or if luckybackup is available will use it) digikam any kind of .pdf viewer xsane seems OK used to use kmail but have been trying T-bird I'm fine with Konq and Krusader (Dolphin has finally gotten decent but I'm not ready for KDE4 or it's not ready for me) Had it with FF constant """"advances""" , I may try Seamonkey Thanks for the replies. Not sure I have the time nor expertise needed for building packages, but Will poke around when I get the chance and take the advice about pbone. BTW, mdv2008.1 is already installed on Dell optiplex 170L and has been running fine for 2-3 years but the software needs upgrading.
  12. Are there reasonably updated packages still available in ANY repos for MDV2008.1 and if so where might I find them and a list of version #? Thanks
  13. Well it's been almost 24 hrs, which is pretty good but just had xserver crash with simple scrolling in browser with USB mouse. There was no intensive GPU activity. . It is my understanding that relevant logs must be accessed via ssh from another machine while suspect machine is crashed. Is this correct? Does not Xorg.0.log.old provide this? If so, I can post Xorg.0.log.old or wait until another crash and provide the log retrieved via ssh. The kdm.log immediately after crash is: ( I have read that "fb not found" is ignorable" Don't know if true or not.) [color="#FF0000"]Current version of pixman: 0.22.0 Before reporting problems, check http://pclinuxos.com to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 8 23:48:37 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/etc/X11/xorg.conf.d" FATAL: Module fbcon not found. klauncher(3426) kdemain: No DBUS session-bus found. Check if you have started the DBUS server. kdeinit4: Communication error with launcher. Exiting! kdmgreet(3354)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server" [/color] [mi] EQ overflowing. The server is probably stuck in an infinite loop. Backtrace: 0: /etc/X11/X (xorg_backtrace+0x3b) [0x80e6d8b] 1: /etc/X11/X (mieqEnqueue+0x1ab) [0x80e60db] 2: /etc/X11/X (xf86PostMotionEventM+0xbf) [0x80c26ef] 3: /etc/X11/X (xf86PostMotionEventP+0x58) [0x80c2828] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6b55000+0x2b9e) [0xb6b57b9e] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6b55000+0x3a62) [0xb6b58a62] 6: /etc/X11/X (0x8048000+0x67a5f) [0x80afa5f] 7: /etc/X11/X (0x8048000+0x1238c4) [0x816b8c4] 8: (vdso) (__kernel_sigreturn+0x0) [0xffffe400] 9: (vdso) (__kernel_vsyscall+0x10) [0xffffe424] 10: /lib/i686/libc.so.6 (0xb7271000+0xe4a53) [0xb7355a53] 11: /lib/i686/libc.so.6 (0xb7271000+0x7104c) [0xb72e204c] 12: /lib/i686/libc.so.6 (__libc_malloc+0x5e) [0xb72e041e] 13: /lib/i686/libc.so.6 (0xb7271000+0x64da7) [0xb72d5da7] 14: /lib/i686/libc.so.6 (0xb7271000+0x6bbe3) [0xb72dcbe3] 15: /lib/i686/libc.so.6 (0xb7271000+0x6c2ff) [0xb72dd2ff] 16: /etc/X11/X (DeleteAllWindowProperties+0x4c) [0x80e415c] 17: /etc/X11/X (0x8048000+0x4e055) [0x8096055] 18: /etc/X11/X (DeleteWindow+0x200) [0x8098af0] 19: /etc/X11/X (FreeClientResources+0xe9) [0x808e8b9] 20: /etc/X11/X (CloseDownClient+0x69) [0x806ebe9] 21: /etc/X11/X (0x8048000+0x276b1) [0x806f6b1] 22: /etc/X11/X (0x8048000+0x1a685) [0x8062685] 23: /lib/i686/libc.so.6 (__libc_start_main+0xe6) [0xb7287ca6] 24: /etc/X11/X (0x8048000+0x1a261) [0x8062261] The portion in red, as in previous logs is repeated several times before the backtrace, and many, many times after that. I noticed just before "FATAL fb module not found" there is a line referring to "using /etc/X11/xorg.conf.d" and it contains: [color="#2E8B57"]10-evdev.conf 11-mouse.conf 50-fpit.conf 50-synaptics.conf 50-vboxmouse.conf 50-vmmouse.conf 50-wacom.conf[/color] 1. Is it possible that some simple touchpad/mouse is problematic and /home/user/.kde config files are not reading properly/ Should I rename or delete each users .kde folder which should reset it with the new x configuration? 2. There is also a /usr/share/config/kdm/kwinrc file that has been implicated in xserver crashes over in archlinux and gentoo forums. Plausible? 3. Is it possible to downgrade xserver from 1.10.x? I have another laptop testing a slightly older version of pclos also with Intel Mobile 4 graphics but with older xserver and with no crashes. Most pclos mirrors only have latest version but I did find one or two with the older xserver 1.6.5. Obviously if there are massive dependency issues then it is a no go but maybe worth a try. 4 Final question: currently using MDV 2008.1 KDE3.5.x on desktops for business. All has been well for 2 years well. I have hesitated to migrate to KDE4 for various reasons but am posting this from MDV 2010.1 ONE LiveCd and all seems well. Just using this Toshiba A305 for testing so there is no data on board. Probably going to repartition and reinstall pclos and MDV in dual boot. Unfortunately I can't remember if each plays nice with each others bootloader. I seem to remember each will respect the other's MBR so does it matter which install first? The random xserver crashes on pclos although infrequent, are completely unacceptable in a business office network setting. Also the rolling release aspect of pclos is not comforting, so am willing to give a go at my old friend MDV. How is it going with Mandriva, Mageia (seemed OK but default fonts were barely legible) and what are the prospects for a STABLE Mandriva future? Specifically are the following available in repos?: could not find: AdobeReader LibreOffice I do use and did find Digikam grsync xsane krusader appreciate your time Thank you
  14. OK renamed xorg.conf (xorg.conf does not exist in /etc/X11 anymore) and rebooted into 1024x768 which gave two black strips down each side. Then went to display properties and selected native resolution of 1280x800.logged out then into different user but was missing home and trash folder. Logged back out/in and there they are! All looks normal! very nice. Am running GPU intensive stuff as I post. Will also leave unattended for periods and brush the touchpad or do simple drag and drops and I will try to crash this x configuration over the next day or so and get back to you. OpenGL screensavers in KDE display configuration still crash xserver (not during test but when I hit ESC) but that is not important. Stability is. Read somewhere about not needing xorg.conf but didn't believe it until now! Why would this configuration work? If you have any further instructions please let me know. Thank you
  15. Will give that a go and let you know. It may take until this eve or tomorrow as I am building my own local repository from an earlier release and am d/ling quite a few packages from a mirror before it gets updated to the new pclos 2011 release. Thank you
  16. there is no .xinitc file in home directory although there is an .xsession-errors (very long) file with excerpts here: QDBusObjectPath: invalid path "" X Error: BadValue (integer parameter out of range for operation) 2 Major opcode: 102 (X_ChangeKeyboardControl) Resource id: 0xffffffb0 Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5' OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset x86/MMX/SSE2 OpenGL version string: 2.1 Mesa 7.10.3 OpenGL shading language version string: 1.20 Driver: Intel GPU class: i965 OpenGL version: 2.1 GLSL version: 1.20 Mesa version: 7.10.3 X server version: 1.10.2 Linux kernel version: 2.6.38 Direct rendering: yes Requires strict binding: yes GLSL shaders: yes Texture NPOT support: yes QDBusObjectPath: invalid path "" plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) Object::connect: No such slot AbstractItemView::iconSettingsChanged() plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) link XMLID_34_ hasn't been detected! link XMLID_34_ hasn't been detected! link XMLID_36_ hasn't been detected! plasma-desktop(7386)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0) "/usr/bin/kactivitymanagerd(7381)" Soprano: "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files" "/usr/bin/kactivitymanagerd(7381)" Soprano: "QLocalSocket::connectToServer: Invalid name" "/usr/bin/kactivitymanagerd(7381)" Soprano: "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files" "/usr/bin/kactivitymanagerd(7381)" Soprano: "QLocalSocket::connectToServer: Invalid name" "/usr/bin/kactivitymanagerd(7381)" Soprano: "org.freedesktop.DBus.Error.ServiceUnknown - The name org.kde.nepomuk.services.nepomukstorage was not provided by any .service files" "/usr/bin/kactivitymanagerd(7381)" Soprano: "QLocalSocket::connectToServer: Invalid name" Invalid D-BUS interface name 'org.kde.plasma-desktop.PlasmaApp' found while parsing introspection Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString) plasma-desktop(7386)/libakonadi Akonadi::AgentManagerPrivate::createDBusInterface: AgentManager failed to get a valid AgentManager DBus interface. Error is: 1 "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not get owner of name 'org.freedesktop.Akonadi.Control': no such name" plasma-desktop(7386)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name" plasma-desktop(7386)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name" search paths: ("/usr/bin", "/bin", "/usr/local/bin", "/usr/X11R6/bin/", "/usr/games", "/usr/lib/kde4/libexec", "sbin", "/usr/sbin", "/usr/lib/qt4/bin", "/usr/bin", "/usr/sbin", "/usr/lib/kde4/libexec", "/bin", "/sbin", "/usr/X11R6/bin", "/usr/games", "/usr/local/bin", "/usr/local/sbin", "/home/mark/bin", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" plasma-desktop(7386)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name" akonadi.collectionattributetable OK akonadi.collectionmimetyperelation OK akonadi.collectionpimitemrelation OK akonadi.collectiontable OK akonadi.flagtable OK akonadi.mimetypetable OK akonadi.parttable OK akonadi.pimitemflagrelation OK akonadi.pimitemtable OK akonadi.resourcetable OK akonadi.schemaversiontable OK mysql.columns_priv OK mysql.db OK mysql.event OK mysql.func OK mysql.general_log Error : You can't use locks with log tables. status : OK mysql.help_category OK mysql.help_keyword OK mysql.help_relation OK mysql.help_topic OK mysql.host OK mysql.ndb_binlog_index OK mysql.plugin OK mysql.proc OK mysql.procs_priv OK mysql.servers OK mysql.slow_log Error : You can't use locks with log tables. The recommended procedure for regenerating xorg.conf is : rm -f /etc/X11/xorg.conf XFdrake --auto reboot. I have done this and gives the xorg.conf posted here. PCLOS forums have received only one or two replies and none over in xorg mailing lists. I have had quite a bit of luck here being a long time MDV user so thought I would give it a go.If you think of anything else would appreciate it. Being a rolling release, I have been informed that there is no way to turn back the clock on this installation other than install from an slightly older .iso and hope for the best. Thanks for your time
  17. Just a little perspective: Compaq CQ 50 with Intel Mobile 4 graphics / pclos2010 kernel 2.6.33-7 / xorg 1.6.5 / KDEupgraded to 4.6.3 from 4.5.4 with no problems. The Toshiba is also Intel Mobile 4 graphics with fully upgraded pclos 2011 / kernel 2.6.38-8 bfs KDE 4.6.4 / xorg 1.10.x Other than lspci -v I don't know how to tell what the graphics controller is b/c the Mobile 4 series covers a wide range og chipsets. I do remember seeing GM45 in one of the Xorg.0.log of the Toshiba. Both systems default to i915 Intel driver however the Toshiba and Compaq default to different "load modules" section in xorg.conf Please be advised that I reinstalled the final PCLOS 2011 KDE 4.6.4 release (not one of the 3 test releases) on the Toshiba. Current xorg.conf of Toshiba: # File generated by XFdrake (rev 262502) # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerFlags" Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse does not work #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching) EndSection Section "Module" Load "v4l" # Video for Linux EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1280x800" HorizSync 28.8-90 VertRefresh 60 # Monitor preferred modeline (60.0 Hz vsync, 48.9 kHz hsync, ratio 16/10, 98 dpi) ModeLine "1280x800" 69.3 1280 1328 1352 1416 800 803 809 816 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync EndSection Section "Device" Identifier "device1" VendorName "Intel Corporation" BoardName "Intel 810 and later" Driver "intel" Option "DPMS" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x800" EndSubsection Subsection "Display" Depth 15 Modes "1280x800" EndSubsection Subsection "Display" Depth 16 Modes "1280x800" EndSubsection Subsection "Display" Depth 24 Modes "1280x800" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" EndSection current Xorg.0.log: [ 78.142] X.Org X Server 1.10.2 Release Date: 2011-05-28 [ 78.426] X Protocol Version 11, Revision 0 [ 78.426] Build Operating System: Linux_2.6.38.8-pclos1.pae.bfs PCLinuxOS [ 78.426] Current Operating System: Linux toshibasat 2.6.38.8-pclos1.bfs #1 SMP PREEMPT Sat Jun 4 04:13:21 CDT 2011 i686 [ 78.426] Kernel command line: BOOT_IMAGE=linux root=UUID=11337625-ce18-4bb3-8cc3-a11af8446eb3 quiet acpi=on resume=UUID=4a0638f7-e4b7-4ab3-83a4-0d5ab14c07fa splash=silent vga=791 [ 78.426] Build Date: 16 June 2011 11:39:51AM [ 78.426] [ 78.426] Current version of pixman: 0.22.0 [ 78.426] Before reporting problems, check http://pclinuxos.com to make sure that you have the latest version. [ 78.426] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 78.426] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 9 09:13:55 2011 [ 78.494] (==) Using config file: "/etc/X11/xorg.conf" [ 78.494] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 78.504] (==) ServerLayout "layout1" [ 78.504] (**) |-->Screen "screen1" (0) [ 78.504] (**) | |-->Monitor "monitor1" [ 78.504] (**) | |-->Device "device1" [ 78.504] (**) Option "DontZap" "False" [ 78.504] (**) Option "AllowMouseOpenFail" [ 78.504] (==) Automatically adding devices [ 78.504] (==) Automatically enabling devices [ 78.504] (==) FontPath set to: catalogue:/etc/X11/fontpath.d [ 78.504] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 78.504] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 78.504] (II) Loader magic: 0x822bf40 [ 78.504] (II) Module ABI versions: [ 78.504] X.Org ANSI C Emulation: 0.4 [ 78.504] X.Org Video Driver: 10.0 [ 78.504] X.Org XInput driver : 12.2 [ 78.504] X.Org Server Extension : 5.0 [ 78.506] (--) PCI:*(0:0:2:0) 8086:2a42:1179:ff1e rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005110/8 [ 78.506] (--) PCI: (0:0:2:1) 8086:2a43:1179:ff1e rev 7, Mem @ 0xd3500000/1048576 [ 78.506] (II) Open ACPI successful (/var/run/acpid.socket) [ 78.506] (II) "extmod" will be loaded by default. [ 78.506] (II) "dbe" will be loaded by default. [ 78.506] (II) "glx" will be loaded by default. [ 78.506] (II) "record" will be loaded by default. [ 78.506] (II) "dri" will be loaded by default. [ 78.506] (II) "dri2" will be loaded by default. [ 78.506] (II) LoadModule: "v4l" [ 78.523] (II) Loading /usr/lib/xorg/modules/drivers/v4l_drv.so [ 78.536] (II) Module v4l: vendor="X.Org Foundation" [ 78.536] compiled for 1.10.2, module version = 0.1.1 [ 78.536] ABI class: X.Org Video Driver, version 10.0 [ 78.536] (II) LoadModule: "extmod" [ 78.538] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 78.568] (II) Module extmod: vendor="X.Org Foundation" [ 78.568] compiled for 1.10.2, module version = 1.0.0 [ 78.568] Module class: X.Org Server Extension [ 78.568] ABI class: X.Org Server Extension, version 5.0 [ 78.568] (II) Loading extension MIT-SCREEN-SAVER [ 78.568] (II) Loading extension XFree86-VidModeExtension [ 78.568] (II) Loading extension XFree86-DGA [ 78.568] (II) Loading extension DPMS [ 78.568] (II) Loading extension XVideo [ 78.568] (II) Loading extension XVideo-MotionCompensation [ 78.568] (II) Loading extension X-Resource [ 78.568] (II) LoadModule: "dbe" [ 78.569] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 78.590] (II) Module dbe: vendor="X.Org Foundation" [ 78.590] compiled for 1.10.2, module version = 1.0.0 [ 78.590] Module class: X.Org Server Extension [ 78.590] ABI class: X.Org Server Extension, version 5.0 [ 78.590] (II) Loading extension DOUBLE-BUFFER [ 78.590] (II) LoadModule: "glx" [ 78.591] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 78.594] (II) Module glx: vendor="X.Org Foundation" [ 78.594] compiled for 1.10.2, module version = 1.0.0 [ 78.594] ABI class: X.Org Server Extension, version 5.0 [ 78.594] (==) AIGLX enabled [ 78.594] (II) Loading extension GLX [ 78.594] (II) LoadModule: "record" [ 78.595] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 78.639] (II) Module record: vendor="X.Org Foundation" [ 78.639] compiled for 1.10.2, module version = 1.13.0 [ 78.639] Module class: X.Org Server Extension [ 78.639] ABI class: X.Org Server Extension, version 5.0 [ 78.639] (II) Loading extension RECORD [ 78.639] (II) LoadModule: "dri" [ 78.639] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 78.709] (II) Module dri: vendor="X.Org Foundation" [ 78.709] compiled for 1.10.2, module version = 1.0.0 [ 78.709] ABI class: X.Org Server Extension, version 5.0 [ 78.709] (II) Loading extension XFree86-DRI [ 78.709] (II) LoadModule: "dri2" [ 78.710] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 78.710] (II) Module dri2: vendor="X.Org Foundation" [ 78.710] compiled for 1.10.2, module version = 1.2.0 [ 78.711] ABI class: X.Org Server Extension, version 5.0 [ 78.711] (II) Loading extension DRI2 [ 78.711] (II) LoadModule: "intel" [ 78.711] (II) Loading /usr/lib/xorg/modules/drivers/intel-common/intel_drv.so [ 78.812] (II) Module intel: vendor="X.Org Foundation" [ 78.812] compiled for 1.10.2, module version = 2.15.0 [ 78.812] Module class: X.Org Video Driver [ 78.812] ABI class: X.Org Video Driver, version 10.0 [ 78.812] (II) v4l driver for Video4Linux [ 78.812] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 78.812] (++) using VT number 8 [ 78.814] (WW) Falling back to old probe method for v4l [ 78.817] (II) Loading /usr/lib/xorg/modules/drivers/intel-common/intel_drv.so [ 78.817] drmOpenDevice: node name is /dev/dri/card0 [ 78.817] drmOpenDevice: open result is 9, (OK) [ 78.817] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 78.817] drmOpenDevice: node name is /dev/dri/card0 [ 78.817] drmOpenDevice: open result is 9, (OK) [ 78.817] drmOpenByBusid: drmOpenMinor returns 9 [ 78.817] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 78.817] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 78.817] (==) intel(0): RGB weight 888 [ 78.817] (==) intel(0): Default visual is TrueColor [ 78.837] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45 [ 78.837] (--) intel(0): Chipset: "GM45" [ 78.837] (**) intel(0): Relaxed fencing enabled [ 78.837] (**) intel(0): Framebuffer tiled [ 78.837] (**) intel(0): Pixmaps tiled [ 78.837] (**) intel(0): 3D buffers tiled [ 78.837] (**) intel(0): SwapBuffers wait enabled [ 78.837] (==) intel(0): video overlay key set to 0x101fe [ 78.837] (II) intel(0): Output LVDS1 using monitor section monitor1 [ 78.837] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 78.853] (II) intel(0): Output VGA1 has no monitor section [ 78.854] (II) intel(0): Output DP1 has no monitor section [ 78.862] (II) intel(0): Output TV1 has no monitor section [ 78.862] (II) intel(0): EDID for output LVDS1 [ 78.862] (II) intel(0): Manufacturer: LPL Model: 120 Serial#: 0 [ 78.862] (II) intel(0): Year: 2008 Week: 0 [ 78.862] (II) intel(0): EDID Version: 1.3 [ 78.862] (II) intel(0): Digital Display Input [ 78.862] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21 [ 78.862] (II) intel(0): Gamma: 2.20 [ 78.862] (II) intel(0): No DPMS capabilities specified [ 78.862] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 78.862] (II) intel(0): First detailed timing is preferred mode [ 78.862] (II) intel(0): redX: 0.594 redY: 0.349 greenX: 0.325 greenY: 0.543 [ 78.862] (II) intel(0): blueX: 0.157 blueY: 0.139 whiteX: 0.313 whiteY: 0.329 [ 78.862] (II) intel(0): Manufacturer's mask: 0 [ 78.862] (II) intel(0): Supported detailed timing: [ 78.862] (II) intel(0): clock: 69.3 MHz Image Size: 331 x 207 mm [ 78.862] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1352 h_blank_end 1416 h_border: 0 [ 78.862] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0 [ 78.862] (II) intel(0): LGPhilipsLCD [ 78.862] (II) intel(0): Monitor name: LP154WX4-TLC8 [ 78.862] (II) intel(0): EDID (in hex): [ 78.862] (II) intel(0): 00ffffffffffff00320c200100000000 [ 78.862] (II) intel(0): 00120103802115780a14659859538b28 [ 78.862] (II) intel(0): 23505400000001010101010101010101 [ 78.862] (II) intel(0): 010101010101121b0088502010303018 [ 78.862] (II) intel(0): 36004bcf100000190000000000000000 [ 78.862] (II) intel(0): 00000000000000000000000000fe004c [ 78.862] (II) intel(0): 475068696c6970734c43440a000000fc [ 78.862] (II) intel(0): 004c503135345758342d544c43380048 [ 78.862] (II) intel(0): EDID vendor "LPL", prod id 288 [ 78.862] (II) intel(0): Printing DDC gathered Modelines: [ 78.862] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) [ 78.862] (II) intel(0): Not using mode "768x576" (vrefresh out of range) [ 78.862] (II) intel(0): Not using mode "768x576" (vrefresh out of range) [ 78.862] (II) intel(0): Not using mode "1280x800_120" (vrefresh out of range) [ 78.862] (II) intel(0): Not using mode "1280x800_100" (vrefresh out of range) [ 78.862] (II) intel(0): Not using mode "1280x800_85" (vrefresh out of range) [ 78.862] (II) intel(0): Not using mode "1280x800_75" (vrefresh out of range) [ 78.862] (II) intel(0): Not using mode "1280x800_50" (vrefresh out of range) [ 78.862] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "800x600" (vrefresh out of range) [ 78.862] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 78.862] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 78.862] (II) intel(0): Printing probed modes for output LVDS1 [ 78.862] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) [ 78.862] (II) intel(0): Modeline "1280x800_60"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync (49.7 kHz) [ 78.862] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) [ 78.862] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 78.862] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 78.863] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 78.879] (II) intel(0): EDID for output VGA1 [ 78.880] (II) intel(0): EDID for output DP1 [ 78.890] (II) intel(0): EDID for output TV1 [ 78.890] (II) intel(0): Output LVDS1 connected [ 78.890] (II) intel(0): Output VGA1 disconnected [ 78.890] (II) intel(0): Output DP1 disconnected [ 78.890] (II) intel(0): Output TV1 disconnected [ 78.890] (II) intel(0): Using user preference for initial modes [ 78.890] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 78.890] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 78.890] (II) intel(0): Kernel page flipping support detected, enabling [ 78.890] (**) intel(0): Display dimensions: (330, 210) mm [ 78.890] (**) intel(0): DPI set to (98, 96) [ 78.890] (II) Loading sub module "fb" [ 78.890] (II) LoadModule: "fb" [ 78.890] (II) Loading /usr/lib/xorg/modules/libfb.so [ 78.927] (II) Module fb: vendor="X.Org Foundation" [ 78.927] compiled for 1.10.2, module version = 1.0.0 [ 78.927] ABI class: X.Org ANSI C Emulation, version 0.4 [ 78.927] (II) Loading sub module "dri2" [ 78.927] (II) LoadModule: "dri2" [ 78.928] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 78.928] (II) Module dri2: vendor="X.Org Foundation" [ 78.928] compiled for 1.10.2, module version = 1.2.0 [ 78.928] ABI class: X.Org Server Extension, version 5.0 [ 78.928] (==) Depth 24 pixmap format is 32 bpp [ 78.928] (II) intel(0): [DRI2] Setup complete [ 78.928] (II) intel(0): [DRI2] DRI driver: i965 [ 78.928] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled [ 79.019] (II) UXA(0): Driver registered support for the following operations: [ 79.019] (II) solid [ 79.019] (II) copy [ 79.019] (II) composite (RENDER acceleration) [ 79.019] (II) put_image [ 79.019] (II) get_image [ 79.020] (==) intel(0): Backing store disabled [ 79.020] (==) intel(0): Silken mouse enabled [ 79.044] (II) intel(0): Initializing HW Cursor [ 79.067] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 79.074] (**) intel(0): DPMS enabled [ 79.074] (==) intel(0): Intel XvMC decoder enabled [ 79.146] (II) intel(0): Set up textured video [ 79.146] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 79.146] (II) intel(0): direct rendering: DRI2 Enabled [ 79.146] (==) intel(0): hotplug detection: "enabled" [ 79.147] (--) RandR disabled [ 79.147] (II) Initializing built-in extension Generic Event Extension [ 79.147] (II) Initializing built-in extension SHAPE [ 79.147] (II) Initializing built-in extension MIT-SHM [ 79.147] (II) Initializing built-in extension XInputExtension [ 79.147] (II) Initializing built-in extension XTEST [ 79.147] (II) Initializing built-in extension BIG-REQUESTS [ 79.147] (II) Initializing built-in extension SYNC [ 79.147] (II) Initializing built-in extension XKEYBOARD [ 79.147] (II) Initializing built-in extension XC-MISC [ 79.147] (II) Initializing built-in extension SECURITY [ 79.147] (II) Initializing built-in extension XINERAMA [ 79.147] (II) Initializing built-in extension XFIXES [ 79.147] (II) Initializing built-in extension XFree86-Bigfont [ 79.147] (II) Initializing built-in extension RENDER [ 79.147] (II) Initializing built-in extension RANDR [ 79.147] (II) Initializing built-in extension COMPOSITE [ 79.147] (II) Initializing built-in extension DAMAGE [ 79.631] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 79.631] (II) AIGLX: enabled GLX_INTEL_swap_event [ 79.631] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 79.631] (II) AIGLX: enabled GLX_SGI_make_current_read [ 79.631] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 79.631] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so [ 79.631] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 79.632] (II) intel(0): Setting screen physical size to 338 x 211 [ 80.019] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 80.019] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 80.019] (II) LoadModule: "evdev" [ 80.020] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 80.061] (II) Module evdev: vendor="X.Org Foundation" [ 80.061] compiled for 1.10.2, module version = 2.6.0 [ 80.061] Module class: X.Org XInput Driver [ 80.061] ABI class: X.Org XInput driver, version 12.2 [ 80.061] (II) Using input driver 'evdev' for 'Power Button' [ 80.061] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 80.061] (**) Power Button: always reports core events [ 80.061] (**) Power Button: Device: "/dev/input/event4" [ 80.067] (--) Power Button: Found keys [ 80.067] (II) Power Button: Configuring as keyboard [ 80.067] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 80.067] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 80.067] (**) Option "xkb_rules" "evdev" [ 80.067] (**) Option "xkb_model" "pc105" [ 80.067] (**) Option "xkb_layout" "us" [ 80.067] (**) Option "xkb_options" "compose:rwin" [ 80.101] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 80.101] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 80.101] (II) Using input driver 'evdev' for 'Video Bus' [ 80.101] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 80.101] (**) Video Bus: always reports core events [ 80.101] (**) Video Bus: Device: "/dev/input/event5" [ 80.105] (--) Video Bus: Found keys [ 80.105] (II) Video Bus: Configuring as keyboard [ 80.105] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5" [ 80.105] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 80.105] (**) Option "xkb_rules" "evdev" [ 80.105] (**) Option "xkb_model" "pc105" [ 80.105] (**) Option "xkb_layout" "us" [ 80.105] (**) Option "xkb_options" "compose:rwin" [ 80.108] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 80.108] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 80.108] (II) Using input driver 'evdev' for 'Power Button' [ 80.108] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 80.108] (**) Power Button: always reports core events [ 80.108] (**) Power Button: Device: "/dev/input/event2" [ 80.110] (--) Power Button: Found keys [ 80.110] (II) Power Button: Configuring as keyboard [ 80.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 80.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 80.110] (**) Option "xkb_rules" "evdev" [ 80.110] (**) Option "xkb_model" "pc105" [ 80.110] (**) Option "xkb_layout" "us" [ 80.110] (**) Option "xkb_options" "compose:rwin" [ 80.110] (II) config/udev: Adding input device Lid Switch (/dev/input/event3) [ 80.110] (II) No input driver/identifier specified (ignoring) [ 80.114] (II) config/udev: Adding input device CNF7051 (/dev/input/event7) [ 80.114] (**) CNF7051: Applying InputClass "evdev keyboard catchall" [ 80.114] (II) Using input driver 'evdev' for 'CNF7051' [ 80.114] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 80.114] (**) CNF7051: always reports core events [ 80.114] (**) CNF7051: Device: "/dev/input/event7" [ 80.118] (--) CNF7051: Found keys [ 80.118] (II) CNF7051: Configuring as keyboard [ 80.118] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7/event7" [ 80.118] (II) XINPUT: Adding extended input device "CNF7051" (type: KEYBOARD) [ 80.118] (**) Option "xkb_rules" "evdev" [ 80.118] (**) Option "xkb_model" "pc105" [ 80.118] (**) Option "xkb_layout" "us" [ 80.118] (**) Option "xkb_options" "compose:rwin" [ 80.119] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8) [ 80.119] (II) No input driver/identifier specified (ignoring) [ 80.119] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9) [ 80.119] (II) No input driver/identifier specified (ignoring) [ 80.122] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event6) [ 80.122] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall" [ 80.122] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE' [ 80.122] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 80.122] (**) USB OPTICAL MOUSE: always reports core events [ 80.122] (**) USB OPTICAL MOUSE: Device: "/dev/input/event6" [ 80.126] (--) USB OPTICAL MOUSE: Found 3 mouse buttons [ 80.126] (--) USB OPTICAL MOUSE: Found scroll wheel(s) [ 80.126] (--) USB OPTICAL MOUSE: Found relative axes [ 80.126] (--) USB OPTICAL MOUSE: Found x and y relative axes [ 80.126] (II) USB OPTICAL MOUSE: Configuring as mouse [ 80.126] (II) USB OPTICAL MOUSE: Adding scrollwheel support [ 80.126] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5 [ 80.126] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 80.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6/event6" [ 80.126] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE) [ 80.126] (II) USB OPTICAL MOUSE: initialized for relative axes. [ 80.126] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1 [ 80.126] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0 [ 80.126] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000 [ 80.126] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4 [ 80.126] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse1) [ 80.126] (II) No input driver/identifier specified (ignoring) [ 80.132] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 80.132] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 80.132] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 80.132] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 80.132] (**) AT Translated Set 2 keyboard: always reports core events [ 80.132] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 80.135] (--) AT Translated Set 2 keyboard: Found keys [ 80.135] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 80.135] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 80.135] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 80.135] (**) Option "xkb_rules" "evdev" [ 80.135] (**) Option "xkb_model" "pc105" [ 80.135] (**) Option "xkb_layout" "us" [ 80.135] (**) Option "xkb_options" "compose:rwin" [ 80.135] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1) [ 80.135] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 80.135] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 80.135] (II) LoadModule: "synaptics" [ 80.136] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 80.151] (II) Module synaptics: vendor="X.Org Foundation" [ 80.151] compiled for 1.10.2, module version = 1.4.1 [ 80.151] Module class: X.Org XInput Driver [ 80.151] ABI class: X.Org XInput driver, version 12.2 [ 80.151] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 80.151] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 80.152] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 80.152] (**) Option "Device" "/dev/input/event1" [ 80.173] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5578 [ 80.173] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4662 [ 80.173] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 80.173] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 80.173] (--) SynPS/2 Synaptics TouchPad: buttons: left right [ 80.173] (**) Option "SHMConfig" "1" [ 80.173] (**) Option "LeftEdge" "1700" [ 80.173] (**) Option "RightEdge" "5300" [ 80.173] (**) Option "TopEdge" "1700" [ 80.173] (**) Option "BottomEdge" "4200" [ 80.173] (**) Option "FingerLow" "25" [ 80.173] (**) Option "FingerHigh" "30" [ 80.173] (**) Option "MaxTapTime" "180" [ 80.173] (**) Option "MaxTapMove" "220" [ 80.173] (**) Option "VertScrollDelta" "100" [ 80.173] (**) Option "VertEdgeScroll" "1" [ 80.173] (**) Option "HorizEdgeScroll" "1" [ 80.173] (**) Option "VertTwoFingerScroll" "1" [ 80.173] (**) Option "HorizTwoFingerScroll" "1" [ 80.173] (**) Option "TapButton1" "1" [ 80.173] (**) Option "TapButton2" "2" [ 80.173] (**) Option "TapButton3" "3" [ 80.173] (**) Option "MinSpeed" "0.20" [ 80.173] (**) Option "MaxSpeed" "1.00" [ 80.173] (**) Option "AccelFactor" "0.15" [ 80.190] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 80.190] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 80.196] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1" [ 80.196] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 80.196] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 5.0 [ 80.196] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 5.00 [ 80.196] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.150 [ 80.196] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 80.196] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 80.196] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 80.196] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 80.205] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 80.205] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 80.205] (II) No input driver/identifier specified (ignoring) [ 96.481] (II) intel(0): EDID vendor "LPL", prod id 288 [ 96.481] (II) intel(0): Printing DDC gathered Modelines: [ 96.481] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) [ 104.147] (II) intel(0): EDID vendor "LPL", prod id 288 [ 104.147] (II) intel(0): Printing DDC gathered Modelines: [ 104.147] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) The following is a kdm.log crash log: kdmgreet(3142)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server" Backtrace: 0: /etc/X11/X (xorg_backtrace+0x3b) [0x80e6d8b] 1: /etc/X11/X (0x8048000+0x5d585) [0x80a5585] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xffffe40c] 3: /lib/i686/libc.so.6 (0xb720c000+0x6b8a0) [0xb72778a0] 4: /lib/i686/libc.so.6 (0xb720c000+0x6c2ff) [0xb72782ff] 5: /etc/X11/X (DeleteAllWindowProperties+0x4c) [0x80e415c] 6: /etc/X11/X (0x8048000+0x4e055) [0x8096055] 7: /etc/X11/X (DeleteWindow+0x200) [0x8098af0] 8: /etc/X11/X (FreeResource+0xe7) [0x808e237] 9: /etc/X11/X (0x8048000+0x2131f) [0x806931f] 10: /etc/X11/X (0x8048000+0x27747) [0x806f747] 11: /etc/X11/X (0x8048000+0x1a685) [0x8062685] 12: /lib/i686/libc.so.6 (__libc_start_main+0xe6) [0xb7222ca6] 13: /etc/X11/X (0x8048000+0x1a261) [0x8062261] Segmentation fault at address 0xc Fatal server error: Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://pclinuxos.com for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. X.Org X Server 1.10.2 Release Date: 2011-05-28 X Protocol Version 11, Revision 0 Build Operating System: Linux_2.6.38.8-pclos1.pae.bfs PCLinuxOS Current Operating System: Linux toshibasat 2.6.38.8-pclos1.bfs #1 SMP PREEMPT Sat Jun 4 04:13:21 CDT 2011 i686 Kernel command line: BOOT_IMAGE=linux root=UUID=11337625-ce18-4bb3-8cc3-a11af8446eb3 quiet acpi=on resume=UUID=4a0638f7-e4b7-4ab3-83a4-0d5ab14c07fa splash=silent vga=791 Build Date: 16 June 2011 11:39:51AM Current version of pixman: 0.22.0 Before reporting problems, check http://pclinuxos.com to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 6 00:15:51 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/etc/X11/xorg.conf.d" FATAL: Module fbcon not found. klauncher(3193) kdemain: No DBUS session-bus found. Check if you have started the DBUS server. kdeinit4: Communication error with launcher. Exiting! kdmgreet(3187)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server" Here is a kdm.log of a crash a couple days ago referencing hung GPU and/or server: Current version of pixman: 0.22.0 Before reporting problems, check http://pclinuxos.com to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 7 10:58:14 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/etc/X11/xorg.conf.d" FATAL: Module fbcon not found. klauncher(22831) kdemain: No DBUS session-bus found. Check if you have started the DBUS server. kdeinit4: Communication error with launcher. Exiting! kdmgreet(22825)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server" (EE) intel(0): Detected a hung GPU, disabling acceleration. (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg. (EE) intel(0): failed to set cursor: Input/output error (EE) intel(0): failed to set cursor: Input/output error [mi] EQ overflowing. The server is probably stuck in an infinite loop. Backtrace: 0: /etc/X11/X (xorg_backtrace+0x3b) [0x80e6d8b] 1: /etc/X11/X (mieqEnqueue+0x1ab) [0x80e60db] 2: /etc/X11/X (xf86PostMotionEventM+0xbf) [0x80c26ef] 3: /etc/X11/X (xf86PostMotionEvent+0x87) [0x80c28f7] 4: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb6c3c000+0x29cd) [0xb6c3e9cd] 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb6c3c000+0x4919) [0xb6c40919] 6: /etc/X11/X (0x8048000+0x67a5f) [0x80afa5f] 7: /etc/X11/X (0x8048000+0x1238c4) [0x816b8c4] 8: (vdso) (__kernel_sigreturn+0x0) [0xffffe400] 9: /usr/lib/libpixman-1.so.0 (0xb75e9000+0x6d402) [0xb7656402] 10: /usr/lib/libpixman-1.so.0 (pixman_image_composite32+0x3d2) [0xb76292e2] 11: /usr/lib/libpixman-1.so.0 (pixman_image_composite+0xa6) [0xb7629586] 12: /usr/lib/xorg/modules/libfb.so (fbComposite+0x1fe) [0xb723246e] 13: /usr/lib/xorg/modules/drivers/intel-common/intel_drv.so (0xb725f000+0x318bd) [0xb72908bd] 14: /usr/lib/xorg/modules/drivers/intel-common/intel_drv.so (0xb725f000+0x2e036) [0xb728d036] 15: /etc/X11/X (0x8048000+0xdd6c2) [0x81256c2] 16: /etc/X11/X (CompositePicture+0x2d3) [0x811a353] 17: /etc/X11/X (0x8048000+0xd5dd9) [0x811ddd9] 18: /etc/X11/X (0x8048000+0xd2ab3) [0x811aab3] 19: /etc/X11/X (0x8048000+0x27747) [0x806f747] 20: /etc/X11/X (0x8048000+0x1a685) [0x8062685] 21: /lib/i686/libc.so.6 (__libc_start_main+0xe6) [0xb737bca6] 22: /etc/X11/X (0x8048000+0x1a261) [0x8062261] X.Org X Server 1.10.2 Release Date: 2011-05-28 X Protocol Version 11, Revision 0 Build Operating System: Linux_2.6.38.8-pclos1.pae.bfs PCLinuxOS Current Operating System: Linux toshibasat 2.6.38.8-pclos1.bfs #1 SMP PREEMPT Sat Jun 4 04:13:21 CDT 2011 i686 Kernel command line: BOOT_IMAGE=linux root=UUID=11337625-ce18-4bb3-8cc3-a11af8446eb3 quiet acpi=on resume=UUID=4a0638f7-e4b7-4ab3-83a4-0d5ab14c07fa splash=silent vga=791 Build Date: 16 June 2011 11:39:51AM Here is Xorg.0.log of crash occured during this post: Don't know if you also need Xorg.0.log.old? [ 2019.267] X.Org X Server 1.10.2 Release Date: 2011-05-28 [ 2019.267] X Protocol Version 11, Revision 0 [ 2019.267] Build Operating System: Linux_2.6.38.8-pclos1.pae.bfs PCLinuxOS [ 2019.268] Current Operating System: Linux toshibasat 2.6.38.8-pclos1.bfs #1 SMP PREEMPT Sat Jun 4 04:13:21 CDT 2011 i686 [ 2019.268] Kernel command line: BOOT_IMAGE=linux root=UUID=11337625-ce18-4bb3-8cc3-a11af8446eb3 quiet acpi=on resume=UUID=4a0638f7-e4b7-4ab3-83a4-0d5ab14c07fa splash=silent vga=791 [ 2019.268] Build Date: 16 June 2011 11:39:51AM [ 2019.268] [ 2019.268] Current version of pixman: 0.22.0 [ 2019.268] Before reporting problems, check http://pclinuxos.com to make sure that you have the latest version. [ 2019.268] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 2019.268] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 9 09:46:16 2011 [ 2019.268] (==) Using config file: "/etc/X11/xorg.conf" [ 2019.268] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 2019.268] (==) ServerLayout "layout1" [ 2019.269] (**) |-->Screen "screen1" (0) [ 2019.269] (**) | |-->Monitor "monitor1" [ 2019.269] (**) | |-->Device "device1" [ 2019.269] (**) Option "DontZap" "False" [ 2019.269] (**) Option "AllowMouseOpenFail" [ 2019.269] (==) Automatically adding devices [ 2019.269] (==) Automatically enabling devices [ 2019.269] (==) FontPath set to: catalogue:/etc/X11/fontpath.d [ 2019.269] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 2019.269] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 2019.269] (II) Loader magic: 0x822bf40 [ 2019.269] (II) Module ABI versions: [ 2019.269] X.Org ANSI C Emulation: 0.4 [ 2019.269] X.Org Video Driver: 10.0 [ 2019.269] X.Org XInput driver : 12.2 [ 2019.269] X.Org Server Extension : 5.0 [ 2019.271] (--) PCI:*(0:0:2:0) 8086:2a42:1179:ff1e rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005110/8 [ 2019.271] (--) PCI: (0:0:2:1) 8086:2a43:1179:ff1e rev 7, Mem @ 0xd3500000/1048576 [ 2019.271] (II) Open ACPI successful (/var/run/acpid.socket) [ 2019.271] (II) "extmod" will be loaded by default. [ 2019.271] (II) "dbe" will be loaded by default. [ 2019.271] (II) "glx" will be loaded by default. [ 2019.271] (II) "record" will be loaded by default. [ 2019.271] (II) "dri" will be loaded by default. [ 2019.271] (II) "dri2" will be loaded by default. [ 2019.271] (II) LoadModule: "v4l" [ 2019.271] (II) Loading /usr/lib/xorg/modules/drivers/v4l_drv.so [ 2019.271] (II) Module v4l: vendor="X.Org Foundation" [ 2019.271] compiled for 1.10.2, module version = 0.1.1 [ 2019.271] ABI class: X.Org Video Driver, version 10.0 [ 2019.271] (II) LoadModule: "extmod" [ 2019.272] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 2019.272] (II) Module extmod: vendor="X.Org Foundation" [ 2019.272] compiled for 1.10.2, module version = 1.0.0 [ 2019.273] Module class: X.Org Server Extension [ 2019.273] ABI class: X.Org Server Extension, version 5.0 [ 2019.273] (II) Loading extension MIT-SCREEN-SAVER [ 2019.273] (II) Loading extension XFree86-VidModeExtension [ 2019.273] (II) Loading extension XFree86-DGA [ 2019.273] (II) Loading extension DPMS [ 2019.273] (II) Loading extension XVideo [ 2019.273] (II) Loading extension XVideo-MotionCompensation [ 2019.273] (II) Loading extension X-Resource [ 2019.273] (II) LoadModule: "dbe" [ 2019.274] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 2019.274] (II) Module dbe: vendor="X.Org Foundation" [ 2019.274] compiled for 1.10.2, module version = 1.0.0 [ 2019.274] Module class: X.Org Server Extension [ 2019.274] ABI class: X.Org Server Extension, version 5.0 [ 2019.274] (II) Loading extension DOUBLE-BUFFER [ 2019.274] (II) LoadModule: "glx" [ 2019.275] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 2019.275] (II) Module glx: vendor="X.Org Foundation" [ 2019.275] compiled for 1.10.2, module version = 1.0.0 [ 2019.275] ABI class: X.Org Server Extension, version 5.0 [ 2019.275] (==) AIGLX enabled [ 2019.275] (II) Loading extension GLX [ 2019.275] (II) LoadModule: "record" [ 2019.276] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 2019.276] (II) Module record: vendor="X.Org Foundation" [ 2019.276] compiled for 1.10.2, module version = 1.13.0 [ 2019.276] Module class: X.Org Server Extension [ 2019.276] ABI class: X.Org Server Extension, version 5.0 [ 2019.276] (II) Loading extension RECORD [ 2019.276] (II) LoadModule: "dri" [ 2019.277] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 2019.277] (II) Module dri: vendor="X.Org Foundation" [ 2019.277] compiled for 1.10.2, module version = 1.0.0 [ 2019.277] ABI class: X.Org Server Extension, version 5.0 [ 2019.277] (II) Loading extension XFree86-DRI [ 2019.277] (II) LoadModule: "dri2" [ 2019.278] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 2019.278] (II) Module dri2: vendor="X.Org Foundation" [ 2019.278] compiled for 1.10.2, module version = 1.2.0 [ 2019.278] ABI class: X.Org Server Extension, version 5.0 [ 2019.278] (II) Loading extension DRI2 [ 2019.278] (II) LoadModule: "intel" [ 2019.278] (II) Loading /usr/lib/xorg/modules/drivers/intel-common/intel_drv.so [ 2019.278] (II) Module intel: vendor="X.Org Foundation" [ 2019.278] compiled for 1.10.2, module version = 2.15.0 [ 2019.278] Module class: X.Org Video Driver [ 2019.278] ABI class: X.Org Video Driver, version 10.0 [ 2019.278] (II) v4l driver for Video4Linux [ 2019.278] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 2019.279] (++) using VT number 8 [ 2019.281] (WW) Falling back to old probe method for v4l [ 2019.283] (II) Loading /usr/lib/xorg/modules/drivers/intel-common/intel_drv.so [ 2019.283] drmOpenDevice: node name is /dev/dri/card0 [ 2019.283] drmOpenDevice: open result is 9, (OK) [ 2019.283] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 2019.284] drmOpenDevice: node name is /dev/dri/card0 [ 2019.284] drmOpenDevice: open result is 9, (OK) [ 2019.284] drmOpenByBusid: drmOpenMinor returns 9 [ 2019.284] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 2019.284] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 2019.284] (==) intel(0): RGB weight 888 [ 2019.284] (==) intel(0): Default visual is TrueColor [ 2019.284] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45 [ 2019.284] (--) intel(0): Chipset: "GM45" [ 2019.284] (**) intel(0): Relaxed fencing enabled [ 2019.284] (**) intel(0): Framebuffer tiled [ 2019.284] (**) intel(0): Pixmaps tiled [ 2019.284] (**) intel(0): 3D buffers tiled [ 2019.284] (**) intel(0): SwapBuffers wait enabled [ 2019.284] (==) intel(0): video overlay key set to 0x101fe [ 2019.284] (II) intel(0): Output LVDS1 using monitor section monitor1 [ 2019.284] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 2019.300] (II) intel(0): Output VGA1 has no monitor section [ 2019.301] (II) intel(0): Output DP1 has no monitor section [ 2019.476] (II) intel(0): Output TV1 has no monitor section [ 2019.476] (II) intel(0): EDID for output LVDS1 [ 2019.476] (II) intel(0): Manufacturer: LPL Model: 120 Serial#: 0 [ 2019.476] (II) intel(0): Year: 2008 Week: 0 [ 2019.476] (II) intel(0): EDID Version: 1.3 [ 2019.476] (II) intel(0): Digital Display Input [ 2019.476] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21 [ 2019.476] (II) intel(0): Gamma: 2.20 [ 2019.476] (II) intel(0): No DPMS capabilities specified [ 2019.476] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 2019.476] (II) intel(0): First detailed timing is preferred mode [ 2019.476] (II) intel(0): redX: 0.594 redY: 0.349 greenX: 0.325 greenY: 0.543 [ 2019.476] (II) intel(0): blueX: 0.157 blueY: 0.139 whiteX: 0.313 whiteY: 0.329 [ 2019.476] (II) intel(0): Manufacturer's mask: 0 [ 2019.476] (II) intel(0): Supported detailed timing: [ 2019.476] (II) intel(0): clock: 69.3 MHz Image Size: 331 x 207 mm [ 2019.476] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1352 h_blank_end 1416 h_border: 0 [ 2019.476] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0 [ 2019.476] (II) intel(0): LGPhilipsLCD [ 2019.476] (II) intel(0): Monitor name: LP154WX4-TLC8 [ 2019.476] (II) intel(0): EDID (in hex): [ 2019.476] (II) intel(0): 00ffffffffffff00320c200100000000 [ 2019.476] (II) intel(0): 00120103802115780a14659859538b28 [ 2019.476] (II) intel(0): 23505400000001010101010101010101 [ 2019.476] (II) intel(0): 010101010101121b0088502010303018 [ 2019.476] (II) intel(0): 36004bcf100000190000000000000000 [ 2019.476] (II) intel(0): 00000000000000000000000000fe004c [ 2019.476] (II) intel(0): 475068696c6970734c43440a000000fc [ 2019.476] (II) intel(0): 004c503135345758342d544c43380048 [ 2019.476] (II) intel(0): EDID vendor "LPL", prod id 288 [ 2019.476] (II) intel(0): Printing DDC gathered Modelines: [ 2019.476] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) [ 2019.477] (II) intel(0): Not using mode "768x576" (vrefresh out of range) [ 2019.477] (II) intel(0): Not using mode "768x576" (vrefresh out of range) [ 2019.477] (II) intel(0): Not using mode "1280x800_120" (vrefresh out of range) [ 2019.477] (II) intel(0): Not using mode "1280x800_100" (vrefresh out of range) [ 2019.477] (II) intel(0): Not using mode "1280x800_85" (vrefresh out of range) [ 2019.477] (II) intel(0): Not using mode "1280x800_75" (vrefresh out of range) [ 2019.477] (II) intel(0): Not using mode "1280x800_50" (vrefresh out of range) [ 2019.477] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "800x600" (vrefresh out of range) [ 2019.477] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 2019.477] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 2019.477] (II) intel(0): Printing probed modes for output LVDS1 [ 2019.477] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) [ 2019.477] (II) intel(0): Modeline "1280x800_60"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync (49.7 kHz) [ 2019.477] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) [ 2019.477] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 2019.477] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 2019.477] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 2019.493] (II) intel(0): EDID for output VGA1 [ 2019.494] (II) intel(0): EDID for output DP1 [ 2019.676] (II) intel(0): EDID for output TV1 [ 2019.676] (II) intel(0): Output LVDS1 connected [ 2019.676] (II) intel(0): Output VGA1 disconnected [ 2019.676] (II) intel(0): Output DP1 disconnected [ 2019.676] (II) intel(0): Output TV1 disconnected [ 2019.676] (II) intel(0): Using user preference for initial modes [ 2019.676] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 2019.676] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 2019.676] (II) intel(0): Kernel page flipping support detected, enabling [ 2019.676] (**) intel(0): Display dimensions: (330, 210) mm [ 2019.676] (**) intel(0): DPI set to (98, 96) [ 2019.676] (II) Loading sub module "fb" [ 2019.676] (II) LoadModule: "fb" [ 2019.677] (II) Loading /usr/lib/xorg/modules/libfb.so [ 2019.677] (II) Module fb: vendor="X.Org Foundation" [ 2019.678] compiled for 1.10.2, module version = 1.0.0 [ 2019.678] ABI class: X.Org ANSI C Emulation, version 0.4 [ 2019.678] (II) Loading sub module "dri2" [ 2019.678] (II) LoadModule: "dri2" [ 2019.679] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 2019.679] (II) Module dri2: vendor="X.Org Foundation" [ 2019.679] compiled for 1.10.2, module version = 1.2.0 [ 2019.679] ABI class: X.Org Server Extension, version 5.0 [ 2019.679] (==) Depth 24 pixmap format is 32 bpp [ 2019.679] (II) intel(0): [DRI2] Setup complete [ 2019.679] (II) intel(0): [DRI2] DRI driver: i965 [ 2019.679] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled [ 2019.693] (II) UXA(0): Driver registered support for the following operations: [ 2019.693] (II) solid [ 2019.693] (II) copy [ 2019.693] (II) composite (RENDER acceleration) [ 2019.693] (II) put_image [ 2019.693] (II) get_image [ 2019.693] (==) intel(0): Backing store disabled [ 2019.693] (==) intel(0): Silken mouse enabled [ 2019.693] (II) intel(0): Initializing HW Cursor [ 2019.709] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 2019.717] (**) intel(0): DPMS enabled [ 2019.717] (==) intel(0): Intel XvMC decoder enabled [ 2019.790] (II) intel(0): Set up textured video [ 2019.790] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 2019.790] (II) intel(0): direct rendering: DRI2 Enabled [ 2019.790] (==) intel(0): hotplug detection: "enabled" [ 2019.790] (--) RandR disabled [ 2019.790] (II) Initializing built-in extension Generic Event Extension [ 2019.790] (II) Initializing built-in extension SHAPE [ 2019.790] (II) Initializing built-in extension MIT-SHM [ 2019.790] (II) Initializing built-in extension XInputExtension [ 2019.790] (II) Initializing built-in extension XTEST [ 2019.790] (II) Initializing built-in extension BIG-REQUESTS [ 2019.790] (II) Initializing built-in extension SYNC [ 2019.790] (II) Initializing built-in extension XKEYBOARD [ 2019.790] (II) Initializing built-in extension XC-MISC [ 2019.790] (II) Initializing built-in extension SECURITY [ 2019.790] (II) Initializing built-in extension XINERAMA [ 2019.790] (II) Initializing built-in extension XFIXES [ 2019.790] (II) Initializing built-in extension XFree86-Bigfont [ 2019.790] (II) Initializing built-in extension RENDER [ 2019.790] (II) Initializing built-in extension RANDR [ 2019.790] (II) Initializing built-in extension COMPOSITE [ 2019.790] (II) Initializing built-in extension DAMAGE [ 2019.808] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 2019.808] (II) AIGLX: enabled GLX_INTEL_swap_event [ 2019.808] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 2019.808] (II) AIGLX: enabled GLX_SGI_make_current_read [ 2019.808] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 2019.808] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so [ 2019.808] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 2019.809] (II) intel(0): Setting screen physical size to 338 x 211 [ 2019.856] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 2019.856] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 2019.856] (II) LoadModule: "evdev" [ 2019.856] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2019.857] (II) Module evdev: vendor="X.Org Foundation" [ 2019.857] compiled for 1.10.2, module version = 2.6.0 [ 2019.857] Module class: X.Org XInput Driver [ 2019.857] ABI class: X.Org XInput driver, version 12.2 [ 2019.857] (II) Using input driver 'evdev' for 'Power Button' [ 2019.857] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2019.857] (**) Power Button: always reports core events [ 2019.857] (**) Power Button: Device: "/dev/input/event4" [ 2019.865] (--) Power Button: Found keys [ 2019.865] (II) Power Button: Configuring as keyboard [ 2019.865] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 2019.865] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 2019.865] (**) Option "xkb_rules" "evdev" [ 2019.865] (**) Option "xkb_model" "pc105" [ 2019.865] (**) Option "xkb_layout" "us" [ 2019.865] (**) Option "xkb_options" "compose:rwin" [ 2019.892] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 2019.892] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 2019.892] (II) Using input driver 'evdev' for 'Video Bus' [ 2019.892] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2019.892] (**) Video Bus: always reports core events [ 2019.892] (**) Video Bus: Device: "/dev/input/event5" [ 2019.900] (--) Video Bus: Found keys [ 2019.900] (II) Video Bus: Configuring as keyboard [ 2019.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5" [ 2019.900] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 2019.900] (**) Option "xkb_rules" "evdev" [ 2019.900] (**) Option "xkb_model" "pc105" [ 2019.900] (**) Option "xkb_layout" "us" [ 2019.900] (**) Option "xkb_options" "compose:rwin" [ 2019.905] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 2019.905] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 2019.906] (II) Using input driver 'evdev' for 'Power Button' [ 2019.906] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2019.906] (**) Power Button: always reports core events [ 2019.906] (**) Power Button: Device: "/dev/input/event2" [ 2019.912] (--) Power Button: Found keys [ 2019.912] (II) Power Button: Configuring as keyboard [ 2019.912] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 2019.912] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 2019.912] (**) Option "xkb_rules" "evdev" [ 2019.912] (**) Option "xkb_model" "pc105" [ 2019.912] (**) Option "xkb_layout" "us" [ 2019.912] (**) Option "xkb_options" "compose:rwin" [ 2019.913] (II) config/udev: Adding input device Lid Switch (/dev/input/event3) [ 2019.913] (II) No input driver/identifier specified (ignoring) [ 2019.917] (II) config/udev: Adding input device CNF7051 (/dev/input/event7) [ 2019.917] (**) CNF7051: Applying InputClass "evdev keyboard catchall" [ 2019.918] (II) Using input driver 'evdev' for 'CNF7051' [ 2019.918] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2019.918] (**) CNF7051: always reports core events [ 2019.918] (**) CNF7051: Device: "/dev/input/event7" [ 2019.924] (--) CNF7051: Found keys [ 2019.924] (II) CNF7051: Configuring as keyboard [ 2019.924] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7/event7" [ 2019.924] (II) XINPUT: Adding extended input device "CNF7051" (type: KEYBOARD) [ 2019.924] (**) Option "xkb_rules" "evdev" [ 2019.924] (**) Option "xkb_model" "pc105" [ 2019.924] (**) Option "xkb_layout" "us" [ 2019.924] (**) Option "xkb_options" "compose:rwin" [ 2019.926] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8) [ 2019.926] (II) No input driver/identifier specified (ignoring) [ 2019.926] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9) [ 2019.926] (II) No input driver/identifier specified (ignoring) [ 2019.930] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event6) [ 2019.930] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall" [ 2019.930] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE' [ 2019.930] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2019.930] (**) USB OPTICAL MOUSE: always reports core events [ 2019.930] (**) USB OPTICAL MOUSE: Device: "/dev/input/event6" [ 2019.936] (--) USB OPTICAL MOUSE: Found 3 mouse buttons [ 2019.936] (--) USB OPTICAL MOUSE: Found scroll wheel(s) [ 2019.936] (--) USB OPTICAL MOUSE: Found relative axes [ 2019.936] (--) USB OPTICAL MOUSE: Found x and y relative axes [ 2019.936] (II) USB OPTICAL MOUSE: Configuring as mouse [ 2019.936] (II) USB OPTICAL MOUSE: Adding scrollwheel support [ 2019.936] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5 [ 2019.936] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 2019.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6/event6" [ 2019.936] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE) [ 2019.936] (II) USB OPTICAL MOUSE: initialized for relative axes. [ 2019.936] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1 [ 2019.936] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0 [ 2019.936] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000 [ 2019.936] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4 [ 2019.937] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse1) [ 2019.937] (II) No input driver/identifier specified (ignoring) [ 2019.945] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 2019.945] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 2019.945] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 2019.945] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2019.945] (**) AT Translated Set 2 keyboard: always reports core events [ 2019.945] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 2019.952] (--) AT Translated Set 2 keyboard: Found keys [ 2019.952] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 2019.952] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 2019.952] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 2019.952] (**) Option "xkb_rules" "evdev" [ 2019.952] (**) Option "xkb_model" "pc105" [ 2019.952] (**) Option "xkb_layout" "us" [ 2019.952] (**) Option "xkb_options" "compose:rwin" [ 2019.953] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1) [ 2019.953] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 2019.953] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 2019.953] (II) LoadModule: "synaptics" [ 2019.954] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 2019.955] (II) Module synaptics: vendor="X.Org Foundation" [ 2019.955] compiled for 1.10.2, module version = 1.4.1 [ 2019.955] Module class: X.Org XInput Driver [ 2019.955] ABI class: X.Org XInput driver, version 12.2 [ 2019.955] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 2019.955] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 2019.955] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 2019.955] (**) Option "Device" "/dev/input/event1" [ 2019.992] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5578 [ 2019.992] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4662 [ 2019.992] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 2019.992] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 2019.992] (--) SynPS/2 Synaptics TouchPad: buttons: left right [ 2019.992] (**) Option "SHMConfig" "1" [ 2019.992] (**) Option "LeftEdge" "1700" [ 2019.992] (**) Option "RightEdge" "5300" [ 2019.992] (**) Option "TopEdge" "1700" [ 2019.992] (**) Option "BottomEdge" "4200" [ 2019.992] (**) Option "FingerLow" "25" [ 2019.992] (**) Option "FingerHigh" "30" [ 2019.992] (**) Option "MaxTapTime" "180" [ 2019.992] (**) Option "MaxTapMove" "220" [ 2019.992] (**) Option "VertScrollDelta" "100" [ 2019.992] (**) Option "VertEdgeScroll" "1" [ 2019.992] (**) Option "HorizEdgeScroll" "1" [ 2019.992] (**) Option "VertTwoFingerScroll" "1" [ 2019.992] (**) Option "HorizTwoFingerScroll" "1" [ 2019.992] (**) Option "TapButton1" "1" [ 2019.992] (**) Option "TapButton2" "2" [ 2019.992] (**) Option "TapButton3" "3" [ 2019.992] (**) Option "MinSpeed" "0.20" [ 2019.993] (**) Option "MaxSpeed" "1.00" [ 2019.993] (**) Option "AccelFactor" "0.15" [ 2020.024] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 2020.024] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 2020.040] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1" [ 2020.040] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 2020.040] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 5.0 [ 2020.040] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 5.00 [ 2020.040] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.150 [ 2020.040] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 2020.040] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 2020.040] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 2020.040] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 2020.068] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 2020.068] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 2020.068] (II) No input driver/identifier specified (ignoring) [ 2026.472] (II) intel(0): EDID vendor "LPL", prod id 288 [ 2026.472] (II) intel(0): Printing DDC gathered Modelines: [ 2026.472] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) [ 2029.468] (II) intel(0): EDID vendor "LPL", prod id 288 [ 2029.468] (II) intel(0): Printing DDC gathered Modelines: [ 2029.468] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz) Hope this helps Thank you for your time
  18. No "bites" over in PCLOS forums or on Xorg mailing lists so here goes. PCLinuxOS 2011 on Toshiba Sat A305 / Intel Mobile 4 (GM45 chipset) 3 gb RAM /2.6.38-8bfs kernel loads the i915 module according to lsmod although I have reverted to "Intel i810 and later" in xorg.conf __________________________________________________________________ chkconfig --list dbus returns: error reading information on service dbus: No such file or directory service dbus status returns: Cannot find dbus service Usage: service -[Rfshv] SERVICE ARGUMENTS -f|--full-restart: Do a fullrestart of the service. -R|--full-restart-all: Do a fullrestart of all running services. -s|--status-all: Print a status of all services. -d|--debug: Launch with debug. -h|--help: This help. chkconfig --list returns: acpid 0:off 1:off 2:off 3:on 4:on 5:on 6:off 7:on alsa 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off apmd 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off apmiser 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off apt 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off atd 0:off 1:off 2:off 3:on 4:on 5:on 6:off 7:off atieventsd 0:off 1:off 2:off 3:off 4:off 5:on 6:off 7:off avahi-daemon 0:off 1:off 2:off 3:on 4:off 5:on 6:off 7:off bpalogin 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off cpufreq 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off dm 0:off 1:off 2:on 3:off 4:on 5:on 6:off 7:on haldaemon 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:on ibod 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off ip6tables 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off iptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off irqbalance 0:off 1:off 2:off 3:on 4:on 5:on 6:off 7:off kheader 0:off 1:off 2:on 3:on 4:off 5:on 6:off 7:off laptop-mode 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off lpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off mandi 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off messagebus 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:on msec 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off mtinkd 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off mysqld 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off netconsole 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off netfs 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off network 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off network-auth 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off network-up 0:off 1:off 2:off 3:on 4:off 5:on 6:off 7:off nfs-common 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off nfs-server 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off nscd 0:off 1:off 2:off 3:on 4:on 5:on 6:off 7:off ntpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off numlock 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off oki4daemon 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off partmon 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off pktcdvd 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off portreserve 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off pppoe 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off pptp 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off resmgr 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off resolvconf 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off rpcbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off saslauthd 0:off 1:off 2:off 3:on 4:on 5:on 6:off 7:off smb 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off snmpd 0:off 1:off 2:off 3:on 4:on 5:on 6:off 7:off sound 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off sshd 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off syslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:on udev-post 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off ultrabayd 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off uuidd 0:off 1:off 2:off 3:on 4:off 5:on 6:off 7:off winbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off wlan 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off xfs 0:off 1:off 2:on 3:on 4:on 5:on 6:off 7:off xinetd 0:off 1:off 2:off 3:on 4:on 5:on 6:off 7:off xinetd based services: cups-lpd: off rsync: off saned: on sshd-xinetd: off *****messagebus which I can only assume is dbus IS ENABLED AND RUNNING IN PCC**** I believe the only alterations I've made from a fresh install are to /usr/share/config/kdm/kdmrc adding "TerminateServer=True" to the [X-*-Core] section as advised by several threads and Xorg config page. These "crashes" can happen randomly and sometimes at moments of inactivity or light usage. If I log in/out rapidly between users, there are no issues. They have happened with NO activity during the session or with dragging a file. Currently, I am running glxgears, neverball (with all effects), watching a youtube video, rsyncing a large file and downloading an .iso AS I POST this! ALL KDE desktop effects except BLUR are enabled using OpenGL WITHOUT VSYNC. (with vsync seems to cause more crashes) I guess we should establish what I call a crash in that the screen goes black with non-blinking cursor in upper left with WORKING mouse. I can ctrl+alt+bckspc which brings me to login, and apps and browser are opened to exact spot as if nothing happened. To me a lockup is where I have to RSEIUB (soft reboot). This has only happened once or twice. I do have an Xorg.0.log and kdm.log and current xorg.conf which I can post. This has been monopolizing my time for the past 2 weeks and I need to resolve if this laptop is going to go into service in the office network. Thank you for your replies.
  19. no obvious errors other than informational in the above, but maybe narrowing this down to dbus problems according to some archlinux threads. kdm log message after another login crash shows many messages about "DBUS server not found", "module fbcon not found" DBUS and related packages installed and up to date. messagebus is running and set to start at boot in PCC. Here are last few lines of /var/log/kdm.log kdmgreet: Fatal IO error: client killed X.Org X Server 1.10.2 Release Date: 2011-05-28 X Protocol Version 11, Revision 0 Build Operating System: Linux_2.6.38.8-pclos1.pae.bfs PCLinuxOS Current Operating System: Linux toshibasat 2.6.38.8-pclos1.bfs #1 SMP PREEMPT Sat Jun 4 04:13:21 CDT 2011 i686 Kernel command line: BOOT_IMAGE=linux root=UUID=11337625-ce18-4bb3-8cc3-a11af8446eb3 quiet acpi=on resume=UUID=4a0638f7-e4b7-4ab3-83a4-0d5ab14c07fa splash=silent vga=791 Build Date: 16 June 2011 11:39:51AM Current version of pixman: 0.22.0 Before reporting problems, check http://pclinuxos.com to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 5 16:55:07 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/etc/X11/xorg.conf.d" FATAL: Module fbcon not found. klauncher(3215) kdemain: No DBUS session-bus found. Check if you have started the DBUS server. kdeinit4: Communication error with launcher. Exiting! kdmgreet(3209)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server" Any ideas?
  20. xorg.conf shows: # File generated by XFdrake (rev 262502) # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerFlags" Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort) #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "v4l" # Video for Linux EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1280x800" HorizSync 28.8-90 VertRefresh 60 # Monitor preferred modeline (60.0 Hz vsync, 48.9 kHz hsync, ratio 16/10, 98 dpi) ModeLine "1280x800" 69.3 1280 1328 1352 1416 800 803 809 816 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync EndSection Section "Device" Identifier "device1" Driver "intel" Option "DPMS" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x800" EndSubsection Subsection "Display" Depth 15 Modes "1280x800" EndSubsection Subsection "Display" Depth 16 Modes "1280x800" EndSubsection Subsection "Display" Depth 24 Modes "1280x800" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" EndSection
  21. Longtime MDV KDE3.5.x user tinkering with PCLOS test-2011.6 KDE4.6.4 (kernel 2.6.38-8bfs) on Toshiba A305 with Intel Mobility 4 graphics. This also happens with a PCLOS2010.12 KDE4.5.4 install that is upgraded.There's been a little help over in PCLOS forums but apparently there's lots of issues with recent KDE4. Am considering giving KDE4 a chance whether on PCLOS or Mandy but this is pretty much a show stopper for KDE4 on a multiuser business laptop. Seemed to install fine and run nicely until I created second and third users. Now OCCASIONALLY on logouts and even in the middle of a session I get a hang. I have a non blinking cursor upper left and a working mouse but no desktop, no panel, no wallpaper no icons, just black. Sometimes I can ctrl+alt+bckspc which restarts xserver and sometimes I have to RSEIUB. Apparently either the driver or kdm is not being "released" for the next login, or something in a session triggers a hang. This has happened about 10-12 times in a 5 day period. Can't find a pattern. Have tried with and without KDE effects enabled and also tried downgrading kernel (2.6.37.x) and just now upgraded x-server but no joy. I have run across many threads about modifying /usr/share/config/kdm/kdmrc to "TermnateServer=true" under the [X-*-Core] section and this has seemed to lessen problem but still happens occasionally and someone has recommended trying xorg "intel" rather than vendor "Intel i810 and later" but when I select xorg in PCC "'configure graphics, the vendor shows "custom", but drop down menu still shows "i810 and later". even after saving and rebooting. Also PCC does not give the option to "test" as in MCC or even previous PCC. This is confirmed by lsmod shows i915, although xorg.conf shows "intel". I have also tried blacklisting vendor intel drivers but no luck. Xorg.0.log from AFTER the last hang shows a lot of stuff but there is a line about "server may be stuck in a loop". I can post all relevant files and more if needed. Main question is how do I try the xorg intel drivers? "xorg-server-intel" show as installed in synaptic but PCLOS keeps loading the vendor specific i810 drivers. Thanks for any help. [moved from Software by spinynorman]
  22. ext3. These recent posts are from a pclos 2009.1 install but OP was on MDV 2008.1 Have to leave now but will tinker and get back. Thanks
  23. More searching indicates UNIX/Linux filesystem do not record a create time but record atime, mtime, ctime. I have read many threads about problems during file transfers but I believe rsync and grsync have flags that can be invoked but have not yet checked it out. My problem is I notice that file date stamps seem to change in my home directory files that are not moved anywhere. As mentioned created simple text file 11-18 then modified it 10 min later and ALL times were changed. Accessed again today and all three times reflect todays date (11-19). This is not good! I don't need accuracy down to hours and minutes but Date stamping appears to follow any and all actions even if file is NOT transfer but accessed or modified in its home directory/partition. Even openoffice files stat this behavior. Very concerning from a business that relies on documents .Hence this thread. Maybe I just don't understand. [user@laptop Desktop]$ stat office_help.ods File: `office_help.ods' Size: 14774 Blocks: 32 IO Block: 4096 regular file Device: 806h/2054d Inode: 1804178 Links: 1 Access: (0664/-rw-rw-r--) Uid: ( 500/ user) Gid: ( 500/ user) Access: 2010-07-22 11:09:54.000000000 -0600 Modify: 2010-07-22 11:09:56.000000000 -0600 Change: 2010-07-22 11:09:56.000000000 -0600 Then I open and modify a few cells and run stat again with this result [user@laptop Desktop]$ stat office_help.ods File: `office_help.ods' Size: 14793 Blocks: 32 IO Block: 4096 regular file Device: 806h/2054d Inode: 1804178 Links: 1 Access: (0664/-rw-rw-r--) Uid: ( 500/ user) Gid: ( 500/ user) Access: 2010-11-19 07:53:18.000000000 -0700 Modify: 2010-11-19 07:53:18.000000000 -0700 Change: 2010-11-19 07:53:18.000000000 -0700 As you can see all three dates change after a slight mod to the spreadsheet. Also not good! I read someplace that no creation date is implemented in Linux b/c of inode structure and performance hits. Does that sound logical? Seems to me that creation date in the file system should be considered extremely important for a number of reasons. There are some suggestions to tar the files to create a date stamp but that also seems unecessary. I have taken to including date prefixed to filename. [uPDATE]: it appears Konq properties takes info from stat which alters all three times, but properties from within OO appear to show original creation time independent of transfer to new disc and access. If this is so then all is well. Pretty good scare there. I still believe the file system should record create date and it be persistant part of file metadata. Thanks
  24. Bump? after digging into this it appears time / date stamp issues are more serious than I first thought. Found lots of info on inode structure ( don't understand but it doeesn't help me) and many searchs indicate issues about transfer of files over samba, etc. When I open some files to read them, the access and modified date moves to the day I read the file and erases the original date. other files don't change. I need to find some way to know when a file was originally created besides having to indicate the date in the filename. I created a text file, waited 10 minutes then added a few word and both access and modify dates were changed to 10 minutes later. Then opened a 2 yr old jpg and tinkered with GIMP, saved and access and modify date are still 2 yrs old. What's up? Is there some reason file creation date is not important in linux or am I missing something? I understand stamps can be off b/c of BIOS or battery but this is not the case this happens on all PCs and laptops I have. Date stamps are very important without having to stat or tar a tiny doc file ( as suggested by some) I don't want to use "touch" to update timestamps. I want original creation date to be persistant and access or mod date to change. I suppose I can include the date in the filename but that seems labor intensive over the long term. Any thoughts or help appreciated. Thanks
  25. this time upgraded all packages first, reboot, then install new kernel from2007/2009 repos and all seems well. Will go through several reboots and check back Thanks
×
×
  • Create New...