shams

hi, i want to use WS-806 CDMA usb modem to connect to the internet but doesn't work i read a tutorial and this is what i did: First i loaded the cdc_acm module and add to the /rc.d/rc.local to load at boot next i did /sbin/lsusb: Bus 002 Device 004: ID 04f2:b016 Chicony Electronics Co., Ltd Bus 002 Device 003: ID 0951:1607 Kingston Technology Bus 002 Device 001: ID 0000:0000 Bus 007 Device 001: ID 0000:0000 Bus 006 Device 001: ID 0000:0000 Bus 005 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 this is the usb port with which the usb modem is attached: Bus 005 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. then i created a file Cygnal_Integrated.options and put it in the /etc/modprobe.d to laod at boot time, this is the file contents: alias usb:v10C4pEA60* usbserial options usbserial vendor=0x10c4 product=0xea60 after reboot i did: dmesg | grep usb: usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver usb usb1: configuration #1 chosen from 1 choice usb usb2: configuration #1 chosen from 1 choice usb usb3: configuration #1 chosen from 1 choice usb usb4: configuration #1 chosen from 1 choice usb usb5: configuration #1 chosen from 1 choice usb usb6: configuration #1 chosen from 1 choice usb usb7: configuration #1 chosen from 1 choice usb 2-4: new high speed USB device using ehci_hcd and address 3 usb 2-4: configuration #1 chosen from 1 choice usb 2-5: new high speed USB device using ehci_hcd and address 4 usb 2-5: configuration #1 chosen from 1 choice usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage usb-storage: device scan complete usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbserial_generic 5-1:1.0: generic converter detected usb 5-1: generic converter now attached to ttyUSB0 usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core usbcore: registered new interface driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters But after all that the wvdialconf didn't get connect to the modem and this is the errors: #wvdialconf wvdial.conf Editing `wvdial.conf'. Scanning your serial ports for a modem. Modem Port Scan<*1>: S0 S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? any one can help please?

yes /mnt/hdb6 exitst, and /dev/hdb6 was one of my linux partitions conataining all my important data, i run the tesdisk tool and it shows the only the /dev/hdb1 is present and other partition is deleted, * is for bootable partion and D for deleted: sk /dev/hdb - 80 GB / 74 GiB - CHS 155061 16 63 Partition Start End Size in sectors * Linux 0 1 1 2039 15 63 2056257 [/boot] D Linux 2040 0 1 24384 15 63 22523760 D Linux 24384 7 1 50808 15 63 26635959 [/] D Linux 50808 13 1 71129 15 63 20483757 [/home] D Linux 71129 2 1 91449 15 63 20483442 D Linux 91449 7 1 111769 15 63 20483127 D Linux 111769 12 1 132089 15 63 20482812 Structure: Ok. Use Up/Down Arrow keys to select partition. Use Left/Right Arrow keys to CHANGE partition characteristics: *=Primary bootable P=Primary L=Logical E=Extended D=Deleted Keys A: add partition, L: load backup, T: change type, P: list files, Enter: to continue EXT3 Large file Sparse superblock, 1052 MB / 1004 MiB

madriva only can recognize the /dev/hda1 and /dev/hdb2 when i mount with: mount /dev/hdb2 /mnt/hdb2 with ls i can see the directories in hdb2 but when want to open with: cd /etc the ouput is : bash: cd: etc: Not a directory these was two primary partitions and there is extended partion with 5 more logical partitions with want to mount get the error: [root@localhost mnt]# mount /dev/hdb6 hdb6 mount: special device /dev/hdb6 does not exist

hi, i have to hard disk one for windows other for linux, grub was installed in the /dev/hdb linux hard disk that boot the windows partitions as well, i attached another third hard drive to copy some data from linux partitions to it, but this procedure corrupt the linx hard disk boot sect, and after that cannot boot to linux ,i installed the mandrake to windows partition and tried to copy the mbr from backup to the /dev/hdb, it was done, but doesn't worked and the situation got more worse, now the system cannot open linux partitions, any free linux partitions recovery tool please? all my important data is in my linux partitions.

hi, i run mandriva 2007 with apche, postfix, dovecot and squirrelmail for my mail server, i change my hostname to example.com, but when send the mail from my local smtp server, postfix send as: user@localhost.example.com that sould be user@example.com, these are some of my configuration files: /etc/posfix/main.cf: # User configurable parameters mydomain = example.com myhostname = example.com inet_interfaces = all mynetworks_style = host #delay_warning_time = 4h /etc/postfix/main.cf.dist: myhostname = example.com mydomain = ecample.com myorigin = $mydomain inet_interfaces = all mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain relay_domains = $mydestination /etc/httpd/conf/httpd.conf: ServerAdmin root@localhost ServerName example.com:80 /etc/hosts: 127.0.0.1 exmaple.com localhost 202.102.185.56 example.com example.com my serve is not always online so i need the first line in /etc/hosts to start the local web server offline. any one can help please?

that was not from manriva 2007, i posted in mistake then i remove that, i can't ping the localhost in mandriva 2007., this is the error: # ping 127.0.0.1 connect: Network is unreachable

ok thanks for that, that was mistake i posted double then i search My Control and My Assistance to delete them but didn't find the way, my problem connecting to the localhost didn't slove, could any one help in this topic: problem connecting to localhost

this is the ping result: # ping 127.0.0.1 connect: Network is unreachable and this is the firefox error opening http://127.0.0.1/?: Unable to connect Firefox can't establish a connection to the server at 127.0.0.1 ok if the problem is loop back device then how i can solve this problem?

and this is the /etc/hosts: # cat /etc/hosts # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost ::1 localhost.localdomain localhost

thanks for replies, the problem is not with the intenet, i can open the web sites, but the only problems is with the local web server this is the output of ifconfig: # /sbin/ifconfig ppp0 Link encap:Point-to-Point Protocol inet addr:203.103.194.46 P-t-P:202.163.90.18 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:430 errors:0 dropped:0 overruns:0 frame:0 TX packets:494 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:391014 (381.8 KiB) TX bytes:104344 (101.8 KiB there ws no problem of the lcoal server with mandirva 2006, i ust installed the 2007 now i cannot connect to my local web server in the /var/www/html, i check the httpd.conf, that was configured correctly for /var/www/html An error occurred while loading http://localhost: Timeout on server Connection was to localhost at port 80 snd this is the firefox error: The server at localhost is taking too long to respond this is httpd.conf: DocumentRoot "/var/www/html" # This should be changed to whatever you set DocumentRoot to. # <Directory "/var/www/html"> # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs-2.0/mod/core.html#options # for more information. Options -Indexes FollowSymLinks MultiViews # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit Indexes AllowOverride None # Controls who can get stuff from this server. Order allow,deny Allow from all </Directory>

hi, how i can delete my topics?

hi, i installed the mandriva 2007, the httpd is runing, i can open the net, bur can run the http://localhost, the browser error is: The connection has timed out this is the /var/log/heepd/error_log last lines: [Mon Nov 13 11:11:24 2006] [notice] core dump file size limit raised to 4294967295 bytes [Mon Nov 13 11:11:26 2006] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Mon Nov 13 11:11:26 2006] [notice] Digest: generating secret for digest authentication ... [Mon Nov 13 11:11:26 2006] [notice] Digest: done [Mon Nov 13 11:11:28 2006] [notice] Apache/2.2.3 (Mandriva Linux/PREFORK-1mdv2007.0) configured -- resuming normal operations

hi, i installed the mandriva 2006, after i attached the other hard disk with windows fat32 partitions, how i can add these partitions to fstab with read write and execute permissions to all users? i know little more like: /dev/hda1 /mnt/win_c defualts 0 0 but need the correct entry as i want?

hi, i am runing mandriva 2007, my modem need to install the driver from the hsfmodem source which need the kenrel sources from where i can get it? this is the kernel: kernel-2.6.17.5mdv-1-1mdv2007.0.i586.rpm i don't have internet conneciton in mandriva to use the urpmi.

hi, installation of mandriva 2007 completed the all 100% packages , but while adding user the cdrom stop woking, i reboote the system and start the installation with the upgrade of mandriva 2007, the installation process completed and install the grub, can start the mandriva , ane there is gui login window for login and password, but when enter the login for root the message is "root login is not allowed", and there is no user created to login, any one can help please?