ttellefsen

Ixthusdan, I guess i didn't know what I was looking for with the files you wanted to see the contents on. My apologies.... I was looking for a directory noot the file. Here are the contents you requested. /etc/fstab /dev/hdb1 / ext3 defaults 1 1 none /dev/pts devpts mode=0620 0 0 /dev/hdb6 /home ext3 defaults 1 2 none /mnt/cdrom supermount dev=/dev/hdc,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0 none /mnt/cdrom2 supermount dev=/dev/scd0,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0 none /mnt/floppy supermount dev=/dev/fd0,fs=ext2:vfat,--,sync,umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/hda1 /mnt/windows ntfs ro,umask=0,iocharset=iso8859-1 0 0 none /proc proc defaults 0 0 /dev/hdb5 swap swap defaults 0 0 /etc/lilo.conf boot=/dev/hda map=/boot/map default="linux" keytable=/boot/us.klt prompt nowarn timeout=100 message=/boot/message menu-scheme=wb:bw:wb:bw image=/boot/vmlinuz label="linux" root=/dev/hdb1 initrd=/boot/initrd.img append="devfs=mount hdd=ide-scsi acpi=ht splash=silent" vga=788 read-only image=/boot/vmlinuz label="linux-nonfb" root=/dev/hdb1 initrd=/boot/initrd.img append="devfs=mount hdd=ide-scsi acpi=ht" read-only image=/boot/vmlinuz label="failsafe" root=/dev/hdb1 initrd=/boot/initrd.img append="devfs=nomount hdd=ide-scsi acpi=ht failsafe" read-only other=/dev/hda1 label="windows" table=/dev/hda other=/dev/fd0 label="floppy" unsafe

Well today my Linux system is down.. The mouse and the keyboard will not work. Not much I can do without it. Anyone have any suggestions?

BVC...Would you provide a quick explanation of what ACPI and APIC do. I think i am confused. APMD is power management . Right? Are you saying at root type CHKCONFIG APMD ON? How do I install it if it is not? I have searched the RPM section in the MCC under all you listed and cannot find anything. Thanks

LXTHUSDAN, Here is what you asked for. See post above for inventory... I do not have /etc/lilo.conf I do not have /etc/fstab. I believe your on to something with the USB. Sometimes the machine boots and my keyboard and mouse do not work. Other times the WUSB11. won't work but the mouse will. I have harddrake diabled to stop the hardware check. My AMI BIOS won't support PNP on/off. I tried that. Also, I seem to have lost the ability to have the machine turn off after logging off using the shutdown option. I checked the services under Control center. APCI is stopped and it won't allow me to start it. Let me know what you think.

Okay: FuzzyLizard, here's your request. I have a Gigabyte Mother Board GA-7VRX with a VIA KT333 AGP Chipset, An Athlon 2100xp+ 1.7GHz. 512 Mb of Kingston DDR (KVR133x64SC3/256) x 2. Two hardrives One a Quantum Fireball ct 15 30. The other a Western Digital WD200AA. Video card is an Nvidia riva TNT2 64. Sound Card is a Creative Soundblaster AudioPCI64/128. Acton SMC2-1211TX Network card (not used). A Compaq CDR/RW and DVD reader. I have a Microsoft Intellimouse explorer USB. A compaq internet Keyboard USB and a Linksys WUSB11 Wireless network adapter. HPOfficejet 710 Printer Via LPT1. The Distibution is a download edition of MDL 9,2. I burned them Via ISO using the Nero directions. Worked fine. No MD5 checksum was done. I do not understand what they are for or how to use them. As far as knowing if everything installed correctly, to me , it appears that way. We know something is wrong though. I have noticed after rebooting at some point it says something to the effect Insmod; Inmod; failed loading EHCI or something to that effect twice. Note: I have disabled harddrake in order via CHKCONFIG to allow the system to work. It hangs on detecting hardware. Here is my Dmesg [thor@localhost thor]$ dmesg Linux version 2.4.22-10mdk (nplanel@no.mandrakesoft.com) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 Thu Sep 18 12:30:58 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 found SMP MP-table at 000fb9b0 hm, page 000fb000 reserved twice. hm, page 000fc000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. ACPI: RSDP (v000 AMI ) @ 0x000fa800 ACPI: RSDT (v001 AMIINT AMIINI09 0x00000010 MSFT 0x0100000d) @ 0x1fff0000 ACPI: FADT (v001 AMIINT AMIINI09 0x00000011 MSFT 0x0100000d) @ 0x1fff0030 ACPI: MADT (v001 AMIINT AMIINI09 0x00000011 MSFT 0x0100000d) @ 0x1fff00c0 ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Pentium Pro APIC version 16 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: GIGABYTE Product ID: 7VRX APIC at: 0xFEE00000 I/O APIC #2 Version 2 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=linux ro root=341 devfs=mount hdd=ide-scsi acpi=ht splash=silent ide_setup: hdd=ide-scsi bootsplash: silent mode. Initializing CPU#0 Detected 1733.441 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 3460.30 BogoMIPS Memory: 514640k/524224k available (1508k kernel code, 9196k reserved, -1961k data, 156k init, 0k highmem, 0k BadRAM) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon XP 2100+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000080 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-19, 2-20, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 24. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178002 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0002 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 79 0d 001 01 0 0 0 0 0 1 1 81 0e 001 01 0 0 0 0 0 1 1 89 0f 001 01 0 0 0 0 0 1 1 91 10 001 01 1 1 0 1 0 1 1 99 11 001 01 1 1 0 1 0 1 1 A1 12 001 01 1 1 0 1 0 1 1 A9 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 B1 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ21 -> 0:21 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1733.3964 MHz. ..... host bus clock speed is 266.6763 MHz. cpu: 0, clocks: 2666763, slice: 1333381 CPU0<T0:2666752,T1:1333360,D:11,S:1333381,C:2666763> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030813 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/3147] at 00:11.0 PCI->APIC IRQ transform: (B0,I10,P0) -> 18 PCI->APIC IRQ transform: (B0,I12,P0) -> 16 PCI->APIC IRQ transform: (B0,I13,P0) -> 17 PCI->APIC IRQ transform: (B0,I17,P0) -> 16 PCI->APIC IRQ transform: (B0,I17,P3) -> 21 PCI->APIC IRQ transform: (B0,I17,P3) -> 21 PCI->APIC IRQ transform: (B0,I20,P0) -> 16 PCI->APIC IRQ transform: (B0,I20,P1) -> 17 PCI->APIC IRQ transform: (B0,I20,P2) -> 18 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI: Via IRQ fixup for 00:11.2, from 10 to 5 PCI: Via IRQ fixup for 00:11.3, from 10 to 5 PCI: Via IRQ fixup for 00:14.0, from 11 to 0 PCI: Via IRQ fixup for 00:14.1, from 11 to 1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 vesafb: framebuffer at 0xda000000, mapped to 0xe0800000, size 1875k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:0336 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... silenjpeg size 107888 bytes, found (800x600, 107840 bytes, v3). Got silent jpeg. Got silent jpeg. Console: switching to colour frame buffer device 92x32 fb0: VESA VGA frame buffer device pty: 1024 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Redundant entry in serial pci_table. Please send the output of lspci -vv, this message (134d,7897,134d,0001) and the manufacturer and name of serial board or modem board to serial-pci-info@lists.sourceforge.net. register_serial(): autoconfig failed RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALLlct15 30, ATA DISK drive hdb: WDC WD200AA, ATA DISK drive blk: queue c0180d20, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0180e5c, I/O limit 4095Mb (mask 0xffffffff) hdc: COMPAQ DVD-ROM SD-612B, ATAPI CD/DVD-ROM drive hdd: R/RW 4x4x32, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 58633344 sectors (30020 MB) w/418KiB Cache, CHS=3649/255/63, UDMA(66) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(66) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 > ide: late registration of driver. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Swsusp 1.0.3: Missing or invalid swap partition location (resume= parameter). Disabled. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 300k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 156k freed Got silent jpeg. Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 12:42:04 Sep 18 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 21 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 21 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 17 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver ehci_hcd 00:14.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:14.2: irq 18, pci mem e0a97e00 usb.c: new USB bus registered, assigned bus number 5 ehci_hcd 00:14.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 4 ports detected usbdevfs: remount parameter error Splash status on console 0 changed to on hub.c: new USB device 00:11.2-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x49f/0xe) is not claimed by any active driver. hub.c: new USB device 00:11.2-2, assigned address 3 usb.c: USB device 3 (vend/prod 0x45e/0x1e) is not claimed by any active driver. hub.c: new USB device 00:11.3-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x77b/0x2219) is not claimed by any active driver. usb.c: registered new driver usbkbd usb.c: registered new driver usbvnetr input0: Compaq Compaq Internet Keyboard on usb1:2.0 usbkbd.c: :USB HID Boot Protocol keyboard driver usb.c: registered new driver hiddev usb vendor/product=77b/2219 usb-uhci.c: interrupt, status 2, frame# 313 Reg Domain usbvnetr: driver version 1.0.1, compiled Sep 18 2003 12:38:17 (dbg_mask x0) MAC addr 00:06:25:0D:37:E8 firmware 1.101.2.84 EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal Multicast is enabled ../src/usb/vnetusba.c: usb eth0 initialized and registered usb.c: registered new driver hid usb-uhci.c: interrupt, status 3, frame# 641 Adding Swap: 506008k swap-space (priority -1) input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb1:3.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice at76c503.c: Generic Atmel at76c503/at76c505 routines v0.11beta4 usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.11beta4 usb.c: registered new driver usbdfu at76c503-rfmd.c: Atmel at76c503 (RFMD) Wireless LAN Driver v0.11beta4 usb.c: registered new driver at76c503-rfmd ********************** REASSOCIATION RESPONSE ********************** ********************** REASSOCIATION RESPONSE ********************** SCSI subsystem driver Revision: 1.00 hdd: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: IDE-CD Model: R/RW 4x4x32 Rev: C1.7 Type: CD-ROM ANSI SCSI revision: 02 hdc: attached ide-cdrom driver. hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.4a [Flags: R/O MODULE]. NTFS volume version 3.1. ********************** REASSOCIATION RESPONSE ********************** es1371: version v0.32 time 12:41:33 Sep 18 2003 es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x09 es1371: found es1371 rev 9 at io 0xec00 irq 18 es1371: features: joystick 0x0 ac97_codec: AC97 Audio codec, id: CRY19 (Cirrus Logic CS4297A rev A) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: Printer, Hewlett-Packard OfficeJet Series 700 lp0: using parport0 (polling). inserting floppy driver for 2.4.22-10mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 0 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 1 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 2 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 3 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 4 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 5 changed to on [thor@localhost thor]$

Okay...I'll get all that info for you and post it here soon. Thanks.

I am installing MDL 9.2 and have an issue during startup that I cannot resolve. The installation goes fine as I set everything up, however, as the machine reboots for the first time, it seems to freeze at the "detecting new hardware" step. Eventually it will go through anywhere from 10-15 minutes later, but I do not have mouse or keyboard support. Reboot after reboot after reboot, it may come up fine and everything will work fine. The next boot usually produces the error again. I have tried to reinstall the distribution numorous times with the same results. Please help.

In reading the IWCONFIG man, it appears that it may not support 128 bit encryption (26 characters). I have tried various ways to enter the key to no avail. If I turn the key off or change to 64 bit, it will work fine. I am using a WUSB11 Linksys access point connecting to a BESW11 wireless router. My system is running Mandrake 9.2. Does anyone have any information to help configure 128 bit WEP encryption?

If you reinstall MDL on a dual boot machine, you should choose MBR as location for Lilo. If not, MDL cannot repair MBR and you will see the "9" error. Same thing will happen when you change the boot method and do not repair the drive on the primary drive.

Okay after much trouble I was able to get the WUSB11 working. Now, two more issues that maybe someone could help with. First: The machine takes 3-4 times to boot and from the bootup info, it seems to hang at the detecting new hardware prompt. This is a portion of the dmsg where it looks like the error might occur. hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers Adding Swap: 506008k swap-space (priority -1) mice: PS/2 mouse device common for all mice at76c503.c: Generic Atmel at76c503/at76c505 routines v0.11beta4 usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.11beta4 usb.c: registered new driver usbdfu at76c503-rfmd.c: Atmel at76c503 (RFMD) Wireless LAN Driver v0.11beta4 usb.c: registered new driver at76c503-rfmd ********************** REASSOCIATION RESPONSE ********************** ********************** REASSOCIATION RESPONSE ********************** SCSI subsystem driver Revision: 1.00 hdd: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: IDE-CD Model: R/RW 4x4x32 Rev: C1.7 Type: CD-ROM ANSI SCSI revision: 02 hdc: attached ide-cdrom driver. hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.4a [Flags: R/O MODULE]. NTFS volume version 3.1. inserting floppy driver for 2.4.22-10mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray usb.c: registered new driver usbmouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver ********************** REASSOCIATION RESPONSE ********************** es1371: version v0.32 time 12:41:33 Sep 18 2003 es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x09 es1371: found es1371 rev 9 at io 0xec00 irq 18 es1371: features: joystick 0x0 ac97_codec: AC97 Audio codec, id: CRY19 (Cirrus Logic CS4297A rev A) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: Printer, Hewlett-Packard OfficeJet Series 700 lp0: using parport0 (polling). Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 0 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 1 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 2 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 3 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 4 changed to on Looking for splash picture.... found (800x600, 14470 bytes, v3). Splash status on console 5 changed to on The second item is about wep key for the device. I read the iwconfig man and it looks as though it does not support 128 bit encryption (26 character key). I only saw 64 bit which is 10 character in the following form xxxx-xxxx-xx. Is this known? The unit would only work when I took encryption off or disabled the key. Again thanks for your help.

I have a WUSB 11 V2.6 instant network device and cannot seem to get it to work. I have read the postings dealing with this issue and tried to follow the directions verbatim with no avail. I am using MDK 9.2. I have installed the wireless tool package and the USB view package. I have downloaded at76c503a.tar.gz. I cannot seem to get through the Make and Make install steps without two errors and I really do not understand symlinks (new to Linux). Would someone be able to provide a step by step procedure for doing this? Couple of issues that I found; in lib/modules, I have two directories one is 2.4.22-10mdk and the other is 2.4.22-1mt. Could this be the problem?