tvlad Posted November 6, 2002 Report Share Posted November 6, 2002 If i want to change my hostname i must change /etc/sysconfig/network and /etc/hosts.Shoul i change any other file ????? Because i read in config howto that i should also change /etc/HOSTNAME, but there is no such file on my system. Quote Link to comment Share on other sites More sharing options...
mtweidmann Posted November 7, 2002 Report Share Posted November 7, 2002 Alternatively you could run the network setup wizard from the Mandrake Control Centre. Part of the setup is choosing the domian and host. Quote Link to comment Share on other sites More sharing options...
paul Posted November 7, 2002 Report Share Posted November 7, 2002 or even easier as root hostname PutYourNewHostnameHere Quote Link to comment Share on other sites More sharing options...
tvlad Posted November 7, 2002 Author Report Share Posted November 7, 2002 I did it as i sad in my first post, and everything works fine.The /etc/HOSTNAME file i was asking, i later found that it used to exist on older versions of linux. Quote Link to comment Share on other sites More sharing options...
Guest makra Posted November 11, 2002 Report Share Posted November 11, 2002 hi folks, I installed the mandrake 9.0 distribution on my PC - succesfully. Some small switches may have to be done for the correct integration of the local network. Config: PC AMD 300 Mhz, Windows {lan server, status: ok} PC AMD 800 Mhz, Mandrake Linux 9.0{lan client, status running} PC AMD 1200 Mhz, Mandrake Linux 9.0 {lan client, status running} and two windows pc, relatively stable running system. descripion of problem: the computers are not knowing one another only by IP, but not by name. That means, ping <IP> gives result, but ping <name> not. Normally I think, the system must know the computers connected to the local network by name and IP automatically. Could it be possible that you must hack in the whole network in the configuration mask of the network config manually ? makra Quote Link to comment Share on other sites More sharing options...
Guest Ender Posted November 11, 2002 Report Share Posted November 11, 2002 The only way I've found to get around this is to edit the linux boxes /etc/hosts file and add the other computers in there manually: <ip> <desired-name> I know there must be a better solution to this because its kinda a pain in the but if you have dhcp and the ip address are changing all the time. What version of windows is running on your server? And also do the windows computers know each other by name? If your WINS server is setup correctly they should. Quote Link to comment Share on other sites More sharing options...
Guest makra Posted November 11, 2002 Report Share Posted November 11, 2002 hi... The only way I've found to get around this is to edit the linux boxes /etc/hosts file and add the other computers in there manually:<ip> <desired-name> I know there must be a better solution to this because its kinda a pain in the but if you have dhcp and the ip address are changing all the time. What version of windows is running on your server? And also do the windows computers know each other by name? If your WINS server is setup correctly they should. thanks for quick replay. I remember, have seen it long ago at sysadmins computer. So, I will run the VI for that :-) The whole net is a mixture of Win2K, Win98, WinNT and linux. WinNT is installed on the server. The windows-network knows the names and IP of all computers in the network, when I have typed in the name of the server and it´s IP. So I think, I could be less afraid of the # and change the settings in /ect/hosts. I think the problem is solved prmaryly thanks. makra Quote Link to comment Share on other sites More sharing options...
Guest mtf169 Posted November 11, 2002 Report Share Posted November 11, 2002 Alternatively you could run the network setup wizard from the Mandrake Control Centre. Part of the setup is choosing the domian and host. I downloaded and installed the 9.0 iso files. The network setup wizards don't appear to be installed on my system. Are they only available in the purchased versions? Or did I do something wrong during my install? Thanks. Quote Link to comment Share on other sites More sharing options...
Guest urbanotter Posted November 13, 2002 Report Share Posted November 13, 2002 Hi mtf169 Yes, the Mandrake control center should be on the downloaded isos. It will appear on the desktop as a monitor with wrench on it. I had a problem with it not getting installed in 8.2, but it worked in9.0 If you don't have the icon, try opening a terminal as root and typing "drakconf". If that doesn't bring it up then it isn't installed. Look for the drakconf rpm on your cds. If it is installed it should open up with a series of icons in a column on the left and some info about your machine in the big box on the right. Click on the icon labled "Connection" or "Networking" (I'm not sitting infront of my linux machine right now or I'd check to make sure which -- but the icon is one of the globe). That should bring up some info about your connection in the large window on the right. In it is a button labled "wizard" near the bottom right. That's the Network Setup Wizard you are looking for. Good luck, urbanotter Quote Link to comment Share on other sites More sharing options...
Guest mtf169 Posted November 14, 2002 Report Share Posted November 14, 2002 Thanks for the help! However, the wizards I'm really interested in are the ones for Samba, FTP, etc. On Mandrake's site they show pictures of those wizards, but they aren't showing up in my "drakconf." I have so much to learn about linux :). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.