USB multi-card reader - how do I mount it?

[fearby]

Have an Asus multicard reader (CF,smartmedia,memory stick) - is it possible to use it in Mandrake 9.1?

Have looked at linux-usb.org but it is a bit beyond me.Here is the info:

 

C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0

D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

P: Vendor=0b05 ProdID=1101 Rev= 0.12

S: Manufacturer=----- Ltd.

S: Product=SPRING-Rev1.1

S: SerialNumber=102090501926

 

 

:?:

[MottS]

I would search google a bit if I would be you.

 

Post ALL 'cat /pros/bus/usb/devices' here (when the device is in of couse)

 

Also, unplug the device for about 5 seconds and then plug it back in. Now type 'dmesg' and look at the end. You should see something about your device. Is it recognized?

 

MOttS

[tyme]

if you don't understand the dmesg output at the end, just copy and past the last 5 or so lines...maybe 10 just to make sure everything is in there.

[fearby]

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0

D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

P: Vendor=0000 ProdID=0000 Rev= 0.00

S: Product=USB UHCI Root Hub

S: SerialNumber=d000

C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0

D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

P: Vendor=0b05 ProdID=1101 Rev= 0.12

S: Manufacturer=----- Ltd.

S: Product=SPRING-Rev1.1

S: SerialNumber=102090501926

C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA

I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=10ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

B: Alloc=104/900 us (12%), #Int= 2, #Iso= 0

D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

P: Vendor=0000 ProdID=0000 Rev= 0.00

S: Product=USB UHCI Root Hub

S: SerialNumber=d400

C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0

D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

P: Vendor=045e ProdID=0040 Rev= 1.21

S: Manufacturer=Microsoft

S: Product=Microsoft Wheel Mouse Optical®

C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid

E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms

T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 4

D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

P: Vendor=0451 ProdID=2046 Rev= 1.25

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms

T: Bus=02 Lev=02 Prnt=03 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0

D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

P: Vendor=03f0 ProdID=1604 Rev= 1.00

S: Manufacturer=Hewlett-Packard

S: Product=DeskJet 940C

S: SerialNumber=HU21I6N03CBH

C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA

I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp

E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

T: Bus=02 Lev=02 Prnt=03 Port=03 Cnt=02 Dev#= 5 Spd=12 MxCh= 0

D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1

P: Vendor=046d ProdID=0850 Rev= 1.00

S: Product=Camera

C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=100mA

I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=quickcam

E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms

E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms

I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=quickcam

E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms

E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms

I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)

I: If#= 2 Alt= 0 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)

E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms

I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)

E: Ad=83(I) Atr=01(Isoc) MxPS= 100 Ivl=1ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0

D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

P: Vendor=0000 ProdID=0000 Rev= 0.00

S: Product=USB UHCI Root Hub

S: SerialNumber=d800

C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0

D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

P: Vendor=0731 ProdID=0528 Rev= 0.01

C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA

I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)

E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms

E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

 

also I now have a device called removable in mnt/dev after booting with the CF card in - cannot see its contents though.

 

Thanks

[tyme]

you need to mount it ;-)

 

stick in a card, su to root, and do:

mount /dev/nameofdevice /mnt/somedir

 

it may ask you to supply a filesystem type...but i'm not sure...

[Gowator]

Mine just mounts as sda1 (unless thats already taken)...

The cards are usually FAT12 but Ive never had to supply the mount options. (automagic)

 

hence my mount command is just:

 

mount /dev/sda1 /mnt/removable -o rw

 

just to be simple about it....