naudefj Posted January 21, 2007 Report Share Posted January 21, 2007 I have an x86_64 and i686 system running mdk2007. My memory stick works 100%on the i686 system, but not on the x86_64 system. Looks like the memory stick is detected, but not automatically mounted. However, I can manually mount it without problems: # mkdir /tmp/x # mount /dev/sdb1 /tmp/x Any suggestions on how to get the system to automount it on x86_64? System info: # uname -a Linux localhost 2.6.17-5mdv #1 SMP Wed Sep 13 14:28:02 EDT 2006 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ GNU/Linux # lsusb Bus 002 Device 005: ID 090c:1000 Feiya Technology Corp. Memory Bar # tail messages Jan 21 08:35:43 htpc kernel: usb 2-7: new high speed USB device using ehci_hcd and address 5 Jan 21 08:35:43 htpc kernel: usb 2-7: configuration #1 chosen from 1 choice Jan 21 08:35:43 htpc kernel: scsi5 : SCSI emulation for USB Mass Storage devices Jan 21 08:35:48 htpc kernel: Vendor: USB Model: Flash Disk Rev: 1100 Jan 21 08:35:48 htpc kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 21 08:35:48 htpc kernel: SCSI device sdb: 246784 512-byte hdwr sectors (126 MB) Jan 21 08:35:48 htpc kernel: sdb: Write Protect is off Jan 21 08:35:48 htpc kernel: sdb: assuming drive cache: write through Jan 21 08:35:48 htpc kernel: SCSI device sdb: 246784 512-byte hdwr sectors (126 MB) Jan 21 08:35:48 htpc kernel: sdb: Write Protect is off Jan 21 08:35:48 htpc kernel: sdb: assuming drive cache: write through Jan 21 08:35:48 htpc kernel: sdb: sdb1 Jan 21 08:35:48 htpc kernel: sd 5:0:0:0: Attached scsi removable disk sdb Jan 21 08:35:48 htpc kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0 [moved from Software by spinynorman] Quote Link to comment Share on other sites More sharing options...
scarecrow Posted January 24, 2007 Report Share Posted January 24, 2007 What's the output of "urpmq pmount" ? Is it installed? Is HAL running as a daemon? Quote Link to comment Share on other sites More sharing options...
naudefj Posted January 28, 2007 Author Report Share Posted January 28, 2007 Thanks for the reply. See answers below: # urpmq pmount pmount And yes, it looks as if HAL is running: # ps -ef | grep hald 73 2385 1 0 Jan26 ? 00:00:00 hald root 2392 2385 0 Jan26 ? 00:00:00 hald-runner 73 2454 2392 0 Jan26 ? 00:00:00 /usr/lib64/hald-addon-acpi root 2461 2392 0 Jan26 ? 00:00:00 /usr/lib64/hald-addon-storage Quote Link to comment Share on other sites More sharing options...
naudefj Posted February 6, 2007 Author Report Share Posted February 6, 2007 Any other suggestions? Quote Link to comment Share on other sites More sharing options...
crazyspongebob Posted February 15, 2007 Report Share Posted February 15, 2007 Using pmount is a lot easier than mount since pmount does not need to be root. I had the same situtation but on a ubuntu box. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.