StimpE Posted July 8, 2006 Report Share Posted July 8, 2006 So far I've done the following to get mandriva 2006 to detect my wireless card (Intel PRO/Wireless 3945ABG) su to switch to root user ndiswrapper -l this will list installed drivers ndiswrapper -e followed by each driver listed to remove each driver mdiswrapper -l make sure the list is blank Download a driver for your card from List - NdisWrapper Use a driver from here if posiable as these are verified drivers, extract and save this in a folder Download for example At the console prompt change to the directory where you copied the driver too ndiswrapper -i filename.inf instal driver (Specify your driver .inf file) ndiswrapper -l to ensure your driver is listed Now you should see something like, showing your driver if not we have an issue!: Installed ndis drivers: bcmwl5 driver present, hardware present now at the konsole enter: ndiswrapper -m depmod -a modprobe ndiswrapper Now I'm assuming I have to configure the wireless connection to retrieve the address information from the dhcp server? Is there some file I configure for this? Any help is appreciated, thanks. Quote Link to comment Share on other sites More sharing options...
Guest Shadowduck Posted July 11, 2006 Report Share Posted July 11, 2006 Do you have a driver disk for the card? I originally installed my netgear using ndiswrapper and windows drivers, all done through the config tool from Harddrake - I don't remember the details as it was a while back (possibly the first thing I did in Linux) but it was pretty straightforward, even for a Linux virgin. The DHCP settings etc are all available through the Control Centre, there's a network configuration utility in there that's pretty easy to use. Haven't a scooby how to do any of that from the CLI though, sorry! Of course, once I had the network running the first thing I did was download madwifi! :D Quote Link to comment Share on other sites More sharing options...
crazyspongebob Posted July 12, 2006 Report Share Posted July 12, 2006 Now I'm assuming I have to configure the wireless connection to retrieve the address information from the dhcp server? Is there some file I configure for this? Any help is appreciated, thanks. Do you have Winblow$ on the laptop? I configure my wireless card with the same chipset by using ndiswrapper to install the winblow$ driver. Then I have to go to /etc/ndiswrapper directory and edit a config file which I don't remember it off hand. You have to put the card's MAC address and WEP and Network id into the file. J.T. Quote Link to comment Share on other sites More sharing options...
Ixthusdan Posted July 14, 2006 Report Share Posted July 14, 2006 The Mandriva Control Center does this just fine. But there are 2 things to do. The first is to install the driver or activate the device. The second is to setup networking on the device. All can be done using the gui. Quote Link to comment Share on other sites More sharing options...
crazyspongebob Posted August 1, 2006 Report Share Posted August 1, 2006 The Mandriva Control Center does this just fine. But there are 2 things to do. The first is to install the driver or activate the device. The second is to setup networking on the device. All can be done using the gui. I've tried the gui out with my heart content, but nothing works. So I have to fire up vi and edit the darn file. Other than that everything works fine. J.T. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.