avogodro Posted June 6, 2006 Report Share Posted June 6, 2006 (edited) okay i am trying to install a program i gunzip and tar'ed it and got to the point where i am to cd to the directory and type ./configure now here is the point where it hangs checking for libjpeg... no configure: WARNING: libjpeg not found. disable JPEG support. checking for perl... /usr/bin/perl checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation! For more details about this problem, look at the end of config.log. i have installed the qt3 packages too... anybody got any suggestions for a newbie Thanks Edited June 9, 2006 by avogodro Quote Link to comment Share on other sites More sharing options...
aioshin Posted June 6, 2006 Report Share Posted June 6, 2006 make sure you have installed qt-devel packages Quote Link to comment Share on other sites More sharing options...
avogodro Posted June 8, 2006 Author Report Share Posted June 8, 2006 make sure you have installed qt-devel packages I have just checked it [root@localhost nickbacich]# urpmi qt-devel The package(s) are already installed The following package names were assumed: PyQt-devel [root@localhost nickbacich]# Is PyQt-devel the same? Quote Link to comment Share on other sites More sharing options...
aioshin Posted June 8, 2006 Report Share Posted June 8, 2006 try . #urpmi libqt3-devel Quote Link to comment Share on other sites More sharing options...
avogodro Posted June 8, 2006 Author Report Share Posted June 8, 2006 try. #urpmi libqt3-devel This is what i get [root@localhost nickbacich]# urpmi libqt3-devel The following packages can't be installed because they depend on packages that are older than the installed ones: libqt3-devel-3.3.4-23mdk Continue? (Y/n) I always answer no since it is older than the one that is installed. Should i say yes? Quote Link to comment Share on other sites More sharing options...
aioshin Posted June 8, 2006 Report Share Posted June 8, 2006 just dont continue, try to resolve first the conflict.. where did you get your installed qt? if it came from the urpmi default repos, there should not be a problem... or before you install, try to update your repos first.. there might be some changes or update #urpmi.update -a -v that would update all of your repositories... then try the install again Quote Link to comment Share on other sites More sharing options...
avogodro Posted June 8, 2006 Author Report Share Posted June 8, 2006 should i get all of these errors? [root@localhost nickbacich]# urpmi.update -a-v examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.contrib.cz] examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/reconfig.urpmi" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.updates.cz] [root@localhost nickbacich]# Quote Link to comment Share on other sites More sharing options...
aioshin Posted June 8, 2006 Report Share Posted June 8, 2006 it seems that carroll.cac.psu.edu is not in good shape.. try to use easyurmi again to add another mirror for updates, those that are active.. ok I have here.. copy and paste in your konsole, remove the old updates first.. . urpmi.removemedia updates . then add the new one . urpmi.addmedia --update updates ftp://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates/2006.0/ main_updates/ with media_info/hdlist.cz [edited by tyme to fix code section] Quote Link to comment Share on other sites More sharing options...
avogodro Posted June 8, 2006 Author Report Share Posted June 8, 2006 There has to be something i am doing wrong!! [root@localhost nickbacich]# urpmi.removemedia updates removing medium "updates" examining synthesis file [/var/lib/urpmi/synthesis.hdlist.contrib.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] found 0 headers in cache removing 0 obsolete headers in cache wrote config file [/etc/urpmi/urpmi.cfg] [root@localhost nickbacich]# urpmi.addmedia --update updates ftp://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates/2006.0/ main_updates/ with media_info/hdlist.cz added medium updates wrote config file [/etc/urpmi/urpmi.cfg] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.contrib.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] computing md5sum of existing source hdlist (or synthesis) retrieving source hdlist (or synthesis) of "updates"... ftp://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates/2006.0/ main_updates/media_info/hdlist.cz found probed hdlist (or synthesis) as media_info/hdlist.cz ...retrieving done examining hdlist file [/var/cache/urpmi/partial/hdlist.updates.cz] writing list file for medium "updates" examining pubkey file of "updates"... built hdlist synthesis file for medium "updates" found 0 headers in cache removing 0 obsolete headers in cache wrote config file [/etc/urpmi/urpmi.cfg] [root@localhost nickbacich]# urpmi libqt3-devel The following packages can't be installed because they depend on packages that are older than the installed ones: libqt3-devel-3.3.4-23mdk Continue? (Y/n) n [root@localhost nickbacich]# I dont know a low about linux yet.. and i am still learning.. but i am pretty sure it has to be something i am doing wrong... i hate to be so needy.... Thanks Quote Link to comment Share on other sites More sharing options...
aioshin Posted June 9, 2006 Report Share Posted June 9, 2006 The following packages can't be installed because they depend on packagesthat are older than the installed ones: libqt3-devel-3.3.4-23mdk Continue? (Y/n) n Im not sure what packages cause the conflict.. but since its qt-devel, might be that the QT itself have conflict with its devel packages, how did you install QT? if you installed it via urpmi, then there should be no problem, but if you've installed it manually by searching rpm packages of it on rpmbone or similar, then that might be the cause of conflict.... [uh, dont hate it, afterall, that's why they created this forum, to try to help those in need... just dont give up... by this, we'll be able to learn more about this great free OS] Quote Link to comment Share on other sites More sharing options...
avogodro Posted June 9, 2006 Author Report Share Posted June 9, 2006 Im not sure what packages cause the conflict.. but since its qt-devel, might be that the QT itself have conflict with its devel packages, how did you install QT? if you installed it via urpmi, then there should be no problem, but if you've installed it manually by searching rpm packages of it on rpmbone or similar, then that might be the cause of conflict.... THERE IS MY PROBLEM..... I installed from www.rpmfinder.net.... before i found out about urpmi.... NOW IT WORKS.. DONT USE internet rpm sites if you can avoid it!!!... i learned my lesson. Thanks A lot aioshin for all of your help Quote Link to comment Share on other sites More sharing options...
Guest ziga Posted August 27, 2006 Report Share Posted August 27, 2006 can you please post, what exactly you have done to avoid this thing. Just remove the directory where the QT is in(in my case /usr/lib/qt3) or something else? Because i have the same problem as yours&i need to install QT and KDevelop(all of this two have the same problem) by tomorrow. Quote Link to comment Share on other sites More sharing options...
dexter11 Posted August 27, 2006 Report Share Posted August 27, 2006 You mean you installed an rpm from rpmfind or an other outer source? Just use the software uninstaller to get rid of that package or urpme on the command line. Then install kdevelop. Quote Link to comment Share on other sites More sharing options...
Guest ziga Posted August 27, 2006 Report Share Posted August 27, 2006 (edited) You mean you installed an rpm from rpmfind or an other outer source? Just use the software uninstaller to get rid of that package or urpme on the command line.Then install kdevelop. I tried that. But the thing is that i cannot uninstall qt3lib, without uninstalling all sorts of thing including kde, kdebase, java&all sorts of program like K3b and amarok. The full list is down bellow. Because of their dependencies, the following package(s) also need to beremoved: amarok-1.3.1-3mdk, amarok-engine-arts-1.3.1-3mdk, aqhbci-qt-tools-1.0.5-0.beta.2mdk, arts-1.4.2-2.1.20060mdk, digikam-0.8.0-3.1.20060mdk, digikamimageplugins-0.8.0-2.1.20060mdk, galaxy-kde-1.0.2-19mdk, galaxy-kde-kwin-1.0.2-19mdk, gnucash-hbci-1.8.11-3mdk, hplip-0.9.8-3.1.20060mdk, java-1.4.2-kaffe-1.4.2.00-2mdk, java-1.4.2-kaffe-devel-1.4.2.00-2mdk, k3b-0.12.3-11mdk, k3b-dvd-0.12.3-11mdk, kaffeine-0.7-6.1.20060mdk, kdeaccessibility-3.4.2-1mdk, kdeaddons-searchbar-3.4.2-10mdk, kdeartwork-3.4.2-3mdk, kdebase-3.4.2-55.5.20060mdk, kdebase-common-3.4.2-55.5.20060mdk, kdebase-kate-3.4.2-55.5.20060mdk, kdebase-kcontrol-nsplugins-3.4.2-55.5.20060mdk, kdebase-kdeprintfax-3.4.2-55.5.20060mdk, kdebase-kdm-3.4.2-55.5.20060mdk, kdebase-kdm-config-file-3.4.2-55.5.20060mdk, kdebase-kmenuedit-3.4.2-55.5.20060mdk, kdebase-konsole-3.4.2-55.5.20060mdk, kdebase-nsplugins-3.4.2-55.5.20060mdk, kdebase-progs-3.4.2-55.5.20060mdk, kdebase-servicemenu-2006-2.20060mdk, kdebluetooth-1.0-0.beta1.2mdk, kdegraphics-common-3.4.2-11.6.20060mdk, kdegraphics-kfax-3.4.2-11.6.20060mdk, kdegraphics-kghostview-3.4.2-11.6.20060mdk, kdegraphics-kooka-3.4.2-11.6.20060mdk, kdegraphics-kpdf-3.4.2-11.6.20060mdk, kdegraphics-ksnapshot-3.4.2-11.6.20060mdk, kdegraphics-kuickshow-3.4.2-11.6.20060mdk, kde-i18n-en_GB-3.4.3-1mdk, kdelibs-common-3.4.2-31.4.20060mdk, The partially the same list shows when i tried to remove qt3-common. So in case I don't want to remove all this things, what should I do instead? Edited August 27, 2006 by ziga Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.