avogodro

okay i am trying here.. i setup in klaptop in kde to be able to hibernate (suspend to ram) and it look like it is doing fine... it sends the command to sleep.. and then it shuts off with the power light flashing.. but when i open the lid it shuts down... Anybody able to help me figure out what i am doing wrong here/ [moved from Terminal Shell Commands, etc by spinynorman]

I cannot get j-pilot to work either How do i tell what dev my usb device is on? (ie dev/tty/usb01) and how do i setup ports in linux... I am having a similar problem with my cell phone ... it recoginizes it and it shows up in lsusb. but in bitpim (the cell phone prog) it doesnt allow me to access the port.

I am trying to get my USB ports working with mandriva.. totally newbie... In particular I am trying to hotsync my Palm with kpilot. I can press autodetect in kpilot. It detects it as /dev/tty/usb01. I get the signal that it is hotsyncing and then the kpilot freezes... and i get an output on my palm about 2 minutes later stating that it the communication with kpilot was lost. Anyone know how to resolve this? I think it may have something to do with my USB setup... [root@localhost Desktop]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 035: ID 0830:0060 Palm, Inc. Palm Tungsten T / Zire 71 Bus 001 Device 001: ID 0000:0000 [root@localhost Desktop]# any help?

incidentally tapping works just fine in gnome! any ideas?

THERE IS MY PROBLEM..... I installed from www.rpmfinder.net.... before i found out about urpmi.... NOW IT WORKS.. DONT USE internet rpm sites if you can avoid it!!!... i learned my lesson. Thanks A lot aioshin for all of your help

HAHA..... Dont break it because it is really annoying when it doesnt work!!!

hello... I am having a problem with the synaptics touchpad on my hp pavilion dv1000 laptop. I have gone into the kde touchpad setup and enabled taping but i can only tap on the right top corner... even that is quarky..(i have to tap that corner several times before it will accept the tap). I used the mandriva one disc tapping worked just like it did in (dare i mention it....) winxp. SO i am at a loss.. do i need to configure the xorg.confg file?? I am a total noob.. i have ksynaptics installed and i have qsynaptics installed too.. but i cannot figure this out .... any help would be greatly appreciated thanks Nick

There has to be something i am doing wrong!! [root@localhost nickbacich]# urpmi.removemedia updates removing medium "updates" examining synthesis file [/var/lib/urpmi/synthesis.hdlist.contrib.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] found 0 headers in cache removing 0 obsolete headers in cache wrote config file [/etc/urpmi/urpmi.cfg] [root@localhost nickbacich]# urpmi.addmedia --update updates ftp://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates/2006.0/ main_updates/ with media_info/hdlist.cz added medium updates wrote config file [/etc/urpmi/urpmi.cfg] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.contrib.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] computing md5sum of existing source hdlist (or synthesis) retrieving source hdlist (or synthesis) of "updates"... ftp://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates/2006.0/ main_updates/media_info/hdlist.cz found probed hdlist (or synthesis) as media_info/hdlist.cz ...retrieving done examining hdlist file [/var/cache/urpmi/partial/hdlist.updates.cz] writing list file for medium "updates" examining pubkey file of "updates"... built hdlist synthesis file for medium "updates" found 0 headers in cache removing 0 obsolete headers in cache wrote config file [/etc/urpmi/urpmi.cfg] [root@localhost nickbacich]# urpmi libqt3-devel The following packages can't be installed because they depend on packages that are older than the installed ones: libqt3-devel-3.3.4-23mdk Continue? (Y/n) n [root@localhost nickbacich]# I dont know a low about linux yet.. and i am still learning.. but i am pretty sure it has to be something i am doing wrong... i hate to be so needy.... Thanks

should i get all of these errors? [root@localhost nickbacich]# urpmi.update -a-v examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.contrib.cz] examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/reconfig.urpmi" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) rsync: link_stat "/sites/carroll.cac.psu.edu/MandrivaLinux/official/updates/2006.0/main_updates/media_info/ descriptions" (in carroll.cac.psu.edu) failed: No such file or directory (2) rsync error: some files could not be transferred (code 23) at main.c(1173) examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.updates.cz] [root@localhost nickbacich]#

This is what i get [root@localhost nickbacich]# urpmi libqt3-devel The following packages can't be installed because they depend on packages that are older than the installed ones: libqt3-devel-3.3.4-23mdk Continue? (Y/n) I always answer no since it is older than the one that is installed. Should i say yes?

I have just checked it [root@localhost nickbacich]# urpmi qt-devel The package(s) are already installed The following package names were assumed: PyQt-devel [root@localhost nickbacich]# Is PyQt-devel the same?

okay i am trying to install a program i gunzip and tar'ed it and got to the point where i am to cd to the directory and type ./configure now here is the point where it hangs checking for libjpeg... no configure: WARNING: libjpeg not found. disable JPEG support. checking for perl... /usr/bin/perl checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation! For more details about this problem, look at the end of config.log. i have installed the qt3 packages too... anybody got any suggestions for a newbie Thanks

Okay i swear I have done this process once.... I uninstalled jre* and deleted it all from my filesystem... then i reinstalled it.... and low and behold i get an rpm file to install!!!!!!!!!!!!!!!!! YAY.... now i link it to my browser and it works perfectly!!!! Thanks for the assistance!!

This did not work for me... and i have already tried the java site for instructions. Now the program is locked! Hmm!!! I unfortunately do not have a Very strong programming background... Thanks

okay here is my problem: I have been trying to get java to work with mozilla 1.7 so i downloaded java from the sun site. I copied the file to usr/Java/ and ran the program as it said in the instructions that I found here: http://www.java.com/en/download/help/5000010500.xml So i preformed the following actions: # chmod a+x jre-1_5_0-linux-i586-rpm.bin next # ./jre-1_5_0-linux-i586-rpm.bin now here is where an rpm is supposed to be created but i dont get an rpm created... i get: jre-1_5_0-linux-i586-rpm.bin* and a directory jre1.5.0_01/ so i tried to install the plugin into my mozilla browser thinking maybe the rpm step may have been omitted. Now i so next i changed the directory to my mozilla plugin directory # cd usr/lib/mozilla-1.7.11/plugins/ then i tried to link the java directory to mozilla # ln -s /usr/java/jre1.5.0_01/plugin/i386/ns7/libjavaplugin_oji.so . so i checked the directory to see if it was installed.. and it was listed there. I obened up mozilla and tried to open a site to see if java worked and i got nothing... it was just the page stating that i need a plugin to install in order for java to work. Any help? oh yeah i also did the same installation for the usr/mozilla/plugins/ directory... as i read on here that someone else did the same and got java to work. But it didnt work for me. Any help at all would be apprecitated. Thanks [moved from Software by spinynorman]