Guest prometheus Posted February 5, 2003 Report Share Posted February 5, 2003 Hi, i just updated my kernel, and tried to give the latest nvidia driver another shot, when i built the .src.rpm, all went well, and i can login to x with no problems, but when i logout of X, my monitor displays a warning sayin that refresh rate is out of range, my monitor is a DAYTEK 75A and can do vsync 30-70 khz and 50-150 hrefresh, and when i exit X it says it was trying a vsync of 73.8 khz, and i edited the XF86Config correctly.. i had the same problem before and i didnt know how to fix it, so i just installed the driver before it (the 3123).. anyone knows how to fix this? Quote Link to comment Share on other sites More sharing options...
ezroller Posted February 5, 2003 Report Share Posted February 5, 2003 i have no idea if this will help, but try editing the XF86config-4 file in /etc/X11 Quote Link to comment Share on other sites More sharing options...
Guest prometheus Posted February 5, 2003 Report Share Posted February 5, 2003 i already did, i'll post it here, i dunno what's wrong with it, it worked fine with the older driver. # File generated by anaconda. Section "ServerLayout" Identifier "Anaconda Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Mouse1" "SendCoreEvents" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" #Load "/usr/X11R6/lib/modules/extensions/libglx.so" Load "glx" Load "extmod" Load "fbdevhw" #Load "dri" Load "record" Load "freetype" Load "type1" EndSection Section "InputDevice" # Option "AutoRepeat" "500 5" # when using XQUEUE, comment out the above line, and uncomment the # following line # Option "Protocol" "Xqueue" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" #Option "XkbOptions" "" Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" #Option "XkbVariant" "" EndSection Section "InputDevice" # Modified by mouseconfig # Modified by mouseconfig # Modified by mouseconfig # Modified by mouseconfig Identifier "Mouse0" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "PS/2" Option "Emulate3Buttons" "yes" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Device" "/dev/input/mice" Option "Protocol" "IMPS/2" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" #HorizSync 31.5 - 48.5 #VertRefresh 50.0 - 70.0 Identifier "Monitor0" VendorName "DAYTEK" ModelName "DAYTEK 75A" DisplaySize 324 244 HorizSync 30.0 - 70.0 VertRefresh 50.0 - 150.0 Option "dpms" EndSection Section "Device" # no known options #Driver "vesa" #BusID Identifier "NVIDIA GeForce 4 (generic)" Driver "nvidia" VendorName "NVIDIA GeForce 4 (generic)" BoardName "NVIDIA GeForce 4 (generic)" EndSection Section "Screen" Identifier "Screen0" Device "NVIDIA GeForce 4 (generic)" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection thanks. Quote Link to comment Share on other sites More sharing options...
ezroller Posted February 5, 2003 Report Share Posted February 5, 2003 mine's a geforce2, but I have the latest drivers also... here's mine: # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config man page for details about the format of # this file. # ********************************************************************** Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) # allows the server to start up even if the mouse doesn't work #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer Load "dri" #Direct Rendering Infrastructure EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "us" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "monitor1" VendorName "Plug'n Play" ModelName "Dell M782" HorizSync 30-85 VertRefresh 50-160 # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 ModeLine "1600x1200/60Hz" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync EndSection Section "Device" Identifier "device1" VendorName "nVidia Corporation" BoardName "NVIDIA GeForce2 DDR (generic)" Driver "nvidia" Option "DPMS" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 16 Subsection "Display" Depth 8 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" EndSection Section "InputDevice" Identifier "Keyboard" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" EndSection Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.