USB Devices [Solved]

[osakasan]

When I check in the MCC Hardware Configuration - there is an area call UNKNOWN. In that area displays all of my USB devices. When I display each of them, under the subject called MODULE , it has nothing.

 

Doe this mean that these USB devices are not configured properly?

 

[moved from Software by spinynorman]

Edited September 21, 2005 by osakasan

[Leo]

Not necessarily, for some reason in 2005LE the hardrake gui seems to have problems with USB devices (I have a graphics tablet that it lists as UPS).

 

What devices do you have and do they appear to be working for you?

 

Leo

[osakasan]

WINTV USB 2 - Module UnKnown

Dell A920 USB Printer - Module Unknown

Creative CAM-600 USB - Module - Spca5xx (and that because I compiled this and installed this) - This one seems to be working fine.

Edited September 16, 2005 by osakasan

[Leo]

How about the printer?

Can you send anything to it?

Have you tried setting it up us9ing the printer facility in the control center[sic]?

[osakasan]

Printer does not respond to any print or test print. It says it is sending to the printer, but no printouts.

 

What is printer facility in the control center[sic]?

Edited September 16, 2005 by osakasan

[Leo]

if you go to:

'Mandriva Control Center' - 'Hardware' - 'Set up the printers'

are you able to see and set up the printer and print a test page?

 

Leo

[osakasan]

I was able to see the printer under MCC. everything seems to be okay except under the Module section, which is Blank.

 

Tried to send a test print. It indicated that it was sent okay, but nothing was printed.

[Leo]

I googled it and there were a number of sites experts exchange seems quite a good bet (scroll down to below the ads). Itt woould appear to be a rrebrandedLexmark 1150 and not partcularly reliable so may be worth checking that it works on windows.

 

Let us know if this works otherwise we will try something else

 

Leo

 

edit: corrected links

Edited September 20, 2005 by Leo

[osakasan]

It works great in WINDOWS. I do know that it is a re-brand of Lexmark 1150. I also read that it should be able to use the driver of Z600, which I did download, compiled and installed.

 

In Harddrake / Printer Setup; it does display Z600 for lexmark and I did select it, but it did not work me.

[osakasan]

Dies anybody have a solution to the probelm below:

 

[root@localhost usb]# cd d..

bash: cd: d..: No such file or directory

[root@localhost usb]# cd.

bash: cd.: command not found

[root@localhost usb]#

[root@localhost usb]# cd..

[root@localhost dev]# cd ..

[root@localhost /]# cd ..

[root@localhost /]# z600:/dev/usb/lp0 "Lexmark Lexmark Z600 Series""Lexmark Printer"

bash: z600:/dev/usb/lp0: No such file or directory

[root@localhost /]# /dev/usb/lp0 "Lexmark Lexmark Z600 Serie""Lexmark Printer"

bash: /dev/usb/lp0: Permission denied

[root@localhost /]# cd /usr/lib/cups/backend

[root@localhost backend]# ls

canon* cups2pegg* epson* http@ ipp* lpd* mtink* nprint* pap* parallel* pdf* ptal@ scsi* smb@ smb3@ socket* usb* z600* z700*

[root@localhost backend]# ./z600

./z600: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory

[root@localhost backend]# ./z700

./z700: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory

[root@localhost backend]#

[Leo]

I am not sure what you are trying to do here however these instructions ought to work (it requires you to have CUPS running)

 

Leo

 

BTW I fixed the links in my previous post

[osakasan]

Okay I finally got the DELL A920 printer to work

 

Now I need some assistance on the Hauppauge WINTV USB 2 driver.