osakasan

Can anyone help me with the problem below: [root@localhost /]# xawtv This is xawtv-3.94, running on Linux/i686 (2.6.11-6mdksmp) can't open /dev/video0: Device or resource busy v4l-conf had some trouble, trying to continue anyway v4l2: open /dev/video0: Device or resource busy v4l2: open /dev/video0: Device or resource busy v4l: open /dev/video0: Device or resource busy no video grabber device available [root@localhost /]# It seems like SPCA5xx program is using /dev/video0, which is currently being use by my webcam. tried creating /dev/video1 and have xawtv use it, but it says it can not be found. and it seems it still want /dev/video0. When I un-install spca5xx program and tried to run xawtv, then it would say that it cannot find /dev/video0, but I know it is created just like /dev/video1.

How do you un-install program that not part of the urpmi or does not have any icon displayed.

Still need some help on this.

Nope, everything is working fine. Still trying to get the WINTV USB 2 device working though.

What does DEVPATH IS NOT SET mean and is there any adjustments that I can make.

I managed to execute xawtv program, but I am getting the following: This is xawtv-3.94, running on Linux/i686 (2.6.11-6mdksmp) /dev/video0 [v4l]: no overlay support v4l-conf had some trouble, trying to continue anyway Loading required GL library /usr/X11R6/lib/libGL.so.1.2 ioctl: VIDIOCMCAPTURE(frame=0;height=288;width=384;format=3): Invalid argument ioctl: VIDIOCMCAPTURE(frame=0;height=288;width=384;format=3): Invalid argument There is no TV channel, but I do see myself as my webcam is pointing directly at me. I wanted the TV stations. All I get is a video display of myself from my web cam.

For some reason I have two of these program on my Task Bar, I would like to delete one of them.

Okay I finally got the DELL A920 printer to work Now I need some assistance on the Hauppauge WINTV USB 2 driver.

Dies anybody have a solution to the probelm below: [root@localhost usb]# cd d.. bash: cd: d..: No such file or directory [root@localhost usb]# cd. bash: cd.: command not found [root@localhost usb]# [root@localhost usb]# cd.. [root@localhost dev]# cd .. [root@localhost /]# cd .. [root@localhost /]# z600:/dev/usb/lp0 "Lexmark Lexmark Z600 Series""Lexmark Printer" bash: z600:/dev/usb/lp0: No such file or directory [root@localhost /]# /dev/usb/lp0 "Lexmark Lexmark Z600 Serie""Lexmark Printer" bash: /dev/usb/lp0: Permission denied [root@localhost /]# cd /usr/lib/cups/backend [root@localhost backend]# ls canon* cups2pegg* epson* http@ ipp* lpd* mtink* nprint* pap* parallel* pdf* ptal@ scsi* smb@ smb3@ socket* usb* z600* z700* [root@localhost backend]# ./z600 ./z600: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory [root@localhost backend]# ./z700 ./z700: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory [root@localhost backend]#

It works great in WINDOWS. I do know that it is a re-brand of Lexmark 1150. I also read that it should be able to use the driver of Z600, which I did download, compiled and installed. In Harddrake / Printer Setup; it does display Z600 for lexmark and I did select it, but it did not work me.

I was able to see the printer under MCC. everything seems to be okay except under the Module section, which is Blank. Tried to send a test print. It indicated that it was sent okay, but nothing was printed.

Printer does not respond to any print or test print. It says it is sending to the printer, but no printouts. What is printer facility in the control center[sic]?

WINTV USB 2 - Module UnKnown Dell A920 USB Printer - Module Unknown Creative CAM-600 USB - Module - Spca5xx (and that because I compiled this and installed this) - This one seems to be working fine.

When I tried to setup the TV Card via MCC, it does nothing, no error and stil is not running.

Still need to find a solution for this, Anyone?

When I check in the MCC Hardware Configuration - there is an area call UNKNOWN. In that area displays all of my USB devices. When I display each of them, under the subject called MODULE , it has nothing. Doe this mean that these USB devices are not configured properly? [moved from Software by spinynorman]

I am getting there, New error: [root@localhost /]# xawtv This is xawtv-3.94, running on Linux/i686 (2.6.11-6mdksmp) can't open /dev/video0: Device or resource busy v4l-conf had some trouble, trying to continue anyway v4l2: open /dev/video0: Device or resource busy v4l2: open /dev/video0: Device or resource busy v4l: open /dev/video0: Device or resource busy no video grabber device available [root@localhost /]# Any Help?

Just where can I get this module. I think I need this for my WINTV USB to work

Well chalk one up for me. I finally did something properly.

I am having a difficult time executing this. I am using Hauppauge WINTV USB device. Install the drivers from USBVISION and SPCA5XX. Compiled and created modules for each. When I execute XAWTV I now get the following error: v4l2: open /dev/video0: No such device vid-open: failed: v4l2 vid-open: trying: v4l... v4l: open /dev/video0: No such device vid-open: failed: v4l no video grabber device available but, yet when ls /dev I do see video0.

Is this something that I should be concern about? Am I doing the proper in activating this?

When I do a DMESG command, I see a lot of the below information: Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=77 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=57 Does anyone knows what this is and how can I stop it. [moved from Software by spinynorman]

Moving along slowly but surely, now can you explain the following error: Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=77 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=57 Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=95 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=75 UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume '', timestamp 2004/12/27 17:40 (1da8) Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=77 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=57 Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=77 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=57 spca5xx: Unknown symbol video_devdata spca5xx: Unknown symbol video_unregister_device spca5xx: Unknown symbol video_device_alloc spca5xx: Unknown symbol video_register_device spca5xx: Unknown symbol video_usercopy spca5xx: Unknown symbol video_device_release No module found in object No module found in object usbvision: Unknown symbol i2c_usb_del_bus usbvision: Unknown symbol video_devdata usbvision: Unknown symbol video_unregister_device usbvision: Unknown symbol video_device_alloc usbvision: Unknown symbol video_register_device usbvision: Unknown symbol i2c_usb_add_bus usbvision: Unknown symbol video_usercopy usbvision: Unknown symbol video_device_release

Is there a Linux program that I will be able to backup the entire drive and also be able to retore it on another drive?

Please tell me how to un-install the Kernel-Source.