Trio3b Posted March 3, 2005 Report Share Posted March 3, 2005 Checked howtos................... but not quite there yet. Can someone help? Using GE intelligent stick. Plugged into usb port and MCC hdwr shows device as: new devfs device /dev/scsi/host1/bus0/target0/lun0/disc old device file /dev/sda user guide says to use mount and follow: # cd /etc/sysconfig/ <works # cat /etc/sysconfig/hwconf | more <doesn't work ..says no directory check dev inf in hwconf and write dwn mnt point create directory in /mnt with: # mkdir /mnt/usbdisk #mount /dev/sda1 /mnt/usbdisk OK here's the input and output in my terminal: [user@localhost user]$ su Password: [root@localhost user]# cd /mnt/ [root@localhost mnt]# mkdir usbflash [root@localhost mnt]# ls /mnt/ cdrom/ fd0/ usbdisk/ usbflash/ [root@localhost mnt]# mount /dev/sda1 /mnt/usbflash mount: special device /dev/sda1 does not exist [root@localhost mnt]# mount /dev/sda1 /mnt/usbdisk mount: special device /dev/sda1 does not exist [root@localhost mnt]# how to create this device? Thanks Quote Link to comment Share on other sites More sharing options...
adamw Posted March 3, 2005 Report Share Posted March 3, 2005 mount /dev/sda /mnt/usbdisk that should do it. :) Quote Link to comment Share on other sites More sharing options...
Trio3b Posted March 4, 2005 Author Report Share Posted March 4, 2005 Mandrake 10.0 KDE 3.2 Here is some input and output: [user@localhost user]$ su Password: without stick inserted: [root@localhost user]# lsusb Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 with stick inserted: [root@localhost user]# lsusb Bus 002 Device 001: ID 0000:0000 Bus 001 Device 002: ID 0ea0:2168 Ours Technology, Inc. Bus 001 Device 001: ID 0000:0000 without stick: [root@localhost user]# fdisk -l Disk /dev/hda: 18.4 GB, 18480365568 bytes 255 heads, 63 sectors/track, 2246 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 764 6136798+ 83 Linux /dev/hda2 765 2246 11904165 5 Extended /dev/hda5 765 827 506016 82 Linux swap /dev/hda6 828 2246 11398086 83 Linux with stick: [root@localhost user]# fdisk -l Disk /dev/hda: 18.4 GB, 18480365568 bytes 255 heads, 63 sectors/track, 2246 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 764 6136798+ 83 Linux /dev/hda2 765 2246 11904165 5 Extended /dev/hda5 765 827 506016 82 Linux swap /dev/hda6 828 2246 11398086 83 Linux Disk /dev/sda: 65 MB, 65273856 bytes 3 heads, 42 sectors/track, 1011 cylinders Units = cylinders of 126 * 512 = 64512 bytes Device Boot Start End Blocks Id System /dev/sda1 ? 6175682 15235283 570754815+ 72 Unknown Partition 1 has different physical/logical beginnings (non-Linux?): phys=(357, 116, 40) logical=(6175681, 2, 19) Partition 1 has different physical/logical endings: phys=(357, 32, 45) logical=(15235282, 0, 7) Partition 1 does not end on cylinder boundary. /dev/sda2 ? 1338806 16704110 968014120 65 Novell Netware 386 Partition 2 has different physical/logical beginnings (non-Linux?): phys=(288, 115, 43) logical=(1338805, 2, 9) Partition 2 has different physical/logical endings: phys=(367, 114, 50) logical=(16704109, 0, 28) Partition 2 does not end on cylinder boundary. /dev/sda3 ? 14840330 30205633 968014096 79 Unknown Partition 3 has different physical/logical beginnings (non-Linux?): phys=(366, 32, 33) logical=(14840329, 0, 12) Partition 3 has different physical/logical endings: phys=(357, 32, 43) logical=(30205632, 0, 25) Partition 3 does not end on cylinder boundary. /dev/sda4 ? 1 28866877 1818613248 d Unknown Partition 4 has different physical/logical beginnings (non-Linux?): phys=(372, 97, 50) logical=(0, 0, 1) Partition 4 has different physical/logical endings: phys=(0, 10, 0) logical=(28866876, 2, 36) Partition 4 does not end on cylinder boundary. Partition table entries are not in disk order manual says to go to this dir, [root@localhost user]# cd /etc/sysconfig/ then to enter this: #cat /etc/sysconfig/hwconf | more ..but says this file does not exist this tells me that etc and sysconfig exist but not hwconf, which I assume is hardware configuration? anyway....heres what's in sysconfig [root@localhost sysconfig]# ls alsa drakconnect installkernel network-scripts/ system* autofsck harddisks keyboard* nfs* usb bootsplash harddrake2/ mouse* pcmcia* userdrake* clock* hotplug* msec postfix xinetd console/ i18n* network* rawdevices desktop* init networking/ syslog [root@localhost sysconfig]# cd /mnt [root@localhost mnt]# ls cdrom/ fd0/ usbdisk/ usbflash/ then manual says to mount dev by: [root@localhost mnt]# mount /dev/sdal /mnt/usbdisk mount: special device /dev/sdal does not exist [root@localhost mnt]# mount /dev/sda1 /mnt/usbdisk mount: special device /dev/sda1 does not exist tried your advice here: [root@localhost mnt]# mount /dev/hda /mnt/usbdrive mount: mount point /mnt/usbdrive does not exist then I forgot I hadnot named the directory" drive"...I had named them "disk" and "flash" ...so... [root@localhost mnt]# mount /dev/hda /mnt/usbdisk mount: /dev/hda already mounted or /mnt/usbdisk busy [root@localhost mnt]# mount /dev/hda /mnt/usbdisk mount: /dev/hda already mounted or /mnt/usbdisk busy [root@localhost mnt]# mount /dev/hda /mnt/usbflash mount: /dev/hda already mounted or /mnt/usbflash busy [root@localhost mnt]# Am I close? I think I have to create this device. The Mandrake control center hdwr detection in the GUI does acknowledge that something is there: this is what's listed when the stick is IN. Bus: SCSI Location on the bus: 0:0:0 Channel: 00 Description: USB |Flash Disk New devfs device: /dev/scsi/host3/bus0/target0/lun0/disc Old device file: /dev/sda Module: unknown Floppy format: I-Stick2 IntelligentStick Media class: hd (Mass Storage|SCSI|Bulk (Zip)) Hope this all helps Sorry about unrelated question...what is different colored text in terminal? Thanks for the help Quote Link to comment Share on other sites More sharing options...
aioshin Posted March 4, 2005 Report Share Posted March 4, 2005 maybe the kernel does not support that device yet or the proper module for that device does not exist in your box though the kernel detected it as storage device but as an scsi, have you tried to check the manufacturers site of your device if they have a support for linux?. or try it here http://www.qbik.ch/usb/devices/ hope you find some info there... also try to install a 2.4 kernel for your distro if ur current is 2.6.. Quote Link to comment Share on other sites More sharing options...
adamw Posted March 4, 2005 Report Share Posted March 4, 2005 I said: mount /dev/sda /mnt/usbdisk not: mount /dev/sda1 /mnt/usbdisk and not: mount /dev/hda /mnt/usbdisk so close. Come on, one more try. :) (/dev/sda1 is what your USB disk would show up as if it had been properly formatted at the factory. /dev/hda is your hard disk. /dev/sda is what your USB disk really is.) Quote Link to comment Share on other sites More sharing options...
Trio3b Posted March 7, 2005 Author Report Share Posted March 7, 2005 (edited) I said: mount /dev/sda /mnt/usbdisk not: mount /dev/sda1 /mnt/usbdisk and not: mount /dev/hda /mnt/usbdisk so close. Come on, one more try. :) (/dev/sda1 is what your USB disk would show up as if it had been properly formatted at the factory. /dev/hda is your hard disk. /dev/sda is what your USB disk really is.) <{POST_SNAPBACK}> Your'e right ....it's sda not sda1 used tkdial (a small text/script kppp dialer) to test this: Did: #mount /dev/sda/ /mnt/usbdisk #cd usbdisk........OK #cp /home/user/tkdial /mnt/usbdisk #ls tkdial .........it's there! took to Wme machine ....yeah, the tkdialer file is there. Tried cp -r and did copy a whole folder. Worked, copied most,but not all files. I guess they're not the right format. tried to : #umount /dev/sda /mnt/usbdisk says usbdisk is busy. Waited until lite on drive stopped, then unplugged. I guess it's OK to hot plug this. Next project is to put an icon on the destop and be able to automount this drive when it is plugged in. How big of a job is this? Separate problem on completely different PC also with MDK 10.0. Plugging in usbdisk freezes entire system....had to hard boot several times, now after LILO, I get blue x screen, then terminal with no borders appears in lower right of bluscreen. Prompt responds to keyboard only if I mouseclick 10-12 lines down first. If I try to load kde or x, I receive fatal server error. I think something's really messed up. Could this happen to the PC that I now have the usbdisk installed in? Anyway......... Thanks for the tips. Edited March 7, 2005 by Trio3b Quote Link to comment Share on other sites More sharing options...
adamw Posted March 7, 2005 Report Share Posted March 7, 2005 the _easiest_ way, if you've got nothing on the disk you actually need, is to plug it into a Windows PC and reformat it. Apparently if you do that, XP at least will format it properly, so when you plug it into your Linux system, it'll show a /dev/sda1 partition properly, and all the MDK automount magic will actually _work_ and it'll all happen without you having to do anything at all. If that's not practical, let me know and I'll see if we can sort something out. Hotplugging, btw, usually isn't a brilliant idea - it _normally_ works, especially if you wait for the operation to (apparently) finish, but it's dirty and _can_ cause trouble. Next time, try this. Run the command 'sync', wait for *THAT* to finish, then try umount /mnt/usbdisk (as root). Then unplug. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.