darwin Posted November 30, 2004 Report Share Posted November 30, 2004 Hi all, I've a big problem with my burner; i can't burn at all even when i'm root (with k3b, xcdroast .......). When i do a cdrecord scanbus my burner is not recognised and at his place i've my SATA HD. scsibus0: 0,0,0 0) 'ATA ' 'WDC WD1600JD-00H' '08.0' Disk 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * The problem is that i'm able to read CDs and used to burn with previous version of mandrake (9,10). k3b's log : cdrecord ----------------------- scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 /usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page. /usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page. /usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page. /usr/bin/cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found on this target. /usr/bin/cdrecord: Warning: controller returns wrong size for CD capabilities page. Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <warly@mandrakesoft.com>. Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'SONY ' Identifikation : 'CD-RW CRX320E ' Revision : 'NYK1' Device seems to be: Generic CD-ROM. Using generic SCSI-2 CD-ROM driver (scsi2_cd). Driver flags : Supported modes: FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord: Drive does not support TAO recording. /usr/bin/cdrecord: Illegal write mode for this drive. My kernel is the 2.6.8.1, may i upgrade ? What i'm doing wrong ?? How can i burn Thanks Quote Link to comment Share on other sites More sharing options...
chris z Posted November 30, 2004 Report Share Posted November 30, 2004 (edited) is your burner really scsi? it seems from the log that's what it's saying, but more than likely it's ide. try running K3B setup & let it re-detect your drives. k3b->tools->k3b setup. Chris Edited November 30, 2004 by chris z Quote Link to comment Share on other sites More sharing options...
darwin Posted November 30, 2004 Author Report Share Posted November 30, 2004 My burner is IDE. When i launch the k3bsetup it finds my burner but i can't burn and get these errors. I've forgotten that when it fails i get this message "mkisofs didn't exit normally" "unknow error 255' maybe it won't be really helpfull ... You've said that cdrecord is looking for an scsi drive . Where to change this ? How can i let it know it's an IDE drive ? Is there any config files to change ? Thanks Quote Link to comment Share on other sites More sharing options...
darwin Posted December 3, 2004 Author Report Share Posted December 3, 2004 Nobody knows how to fix it ?? :unsure: Is there anyone to help me ? thanks Quote Link to comment Share on other sites More sharing options...
Guest messenger7 Posted December 4, 2004 Report Share Posted December 4, 2004 I have just finished an AMD64 3500 2.4 /1g ram. It will read CDs but gives me a file size error. It says not enough room and gives me the total of the files. These are good cds, I've used hundreds of them and packed them full and can burn them in 2.5 minutes with XP, same files. It has to be something simple because the 10.1 is a KILLER in every other aspect. Quote Link to comment Share on other sites More sharing options...
darwin Posted December 7, 2004 Author Report Share Posted December 7, 2004 I've finally solved my problem. I think it's a specific problem to my burner : Sony CRX320E (bulk version of the CRX320A). I don't know why MDK didn't recognise it as a burner ... I've just updated the firware of my burner from NYK1 to NYK5 available on this page (http://sony.storagesupport.com/cdrw/crx320adwn.htm). And now all work perfectly, my burner is recognised :D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.