Guest it_hurts Posted October 13, 2004 Report Share Posted October 13, 2004 (edited) I have been working on this for 2 weeks now. I try out [root@localhost erik]# make make: *** No targets specified and no makefile found. Stop I tried to install the driver and get this [root@localhost erik]# modprobe pcmf502re FATAL: Module pcmf502re not found. when i try [root@localhost erik]# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. sit0 no wireless extensions. i dont know what to do now and i have mandrakelikux 10.1 /belkin wireless notebook network card F5D6020 ver.2 card "Belkin F5D6020" version "Belkin", "11Mbps-Wireless-Notebook-Network-Adapter" manfid 0x01bf, 0x3302 bind "pcmf502re I dont know why i cant install the drive this is my first linux as you can see Edited October 15, 2004 by it_hurts Quote Link to comment Share on other sites More sharing options...
pmpatrick Posted October 14, 2004 Report Share Posted October 14, 2004 Check your installation instructions. Typically, you have to cd to the directory where the tar file is unpacked and run: # ./configure # make # make install You also have to have your kernel source installed. There's usually a text file named readme or install that gives the instructions for doing the install. Quote Link to comment Share on other sites More sharing options...
Guest it_hurts Posted October 14, 2004 Report Share Posted October 14, 2004 (edited) i got the driver to install but now getting a crap load of error i did some reading and found out that mandrake have the driver i need its the atmel_cs i dont know why when i plug in the card it did pick up the driver iam still haveing a hard time with this i got a miss know see i know their are two drivers on the list below but i only install one see if u can help..Thanks for you time guys .. [root@localhost erik]# /etc/init.d/pcmcia restart Shutting down PCMCIA services: ERROR: Module pcmcia_core is in use by yenta_socket done. Starting PCMCIA services: cardmgr[5108]: error in file './atmel.conf' line 53: unknown device 'pcmf502re' cardmgr[5108]: watching 1 socket done. Edited October 14, 2004 by it_hurts Quote Link to comment Share on other sites More sharing options...
durvish Posted October 14, 2004 Report Share Posted October 14, 2004 do you have wireless tools installed? Quote Link to comment Share on other sites More sharing options...
Guest it_hurts Posted October 14, 2004 Report Share Posted October 14, 2004 (edited) yes i do i dont belive thats my prob. what i have done is go in to /etc/pcmcia/config and add device "atmel_cs" class "network" module "atmel_cs" card "Belkin F5D6020" version "Belkin" "11 Mbps Wireless Notebook adapter" manfid 0x01bf, 0x3302 bind "atmel_cs" and then i [root@localhost erik]# modprobe -v atmel and then [root@localhost erik]# etc/init.d/pcmcia restart that were i get my errors Starting PCMCIA services: cardmgr[6690]: error in file 'config' line 1174: syntax error cardmgr[6690]: watching 1 socket [root@localhost erik]# cardct1 ident bash: cardct1: command not found Edited October 15, 2004 by it_hurts Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.