Jump to content
Sign in to follow this  
Kieth

checked hard drives [solved]

Recommended Posts

After reading other posts, I also checked my two hard drives with smartctl. Of course I do not know what the output means :huh: so I was wondering if someone could tell me if there are any problems.

 

Thanks,

Kieth

[root@localhost ~]# smartctl -a /dev/sda

smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.4-desktop-nrj.69mib] (local build)

Copyright © 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net'>http://smartmontools.sourceforge.net

 

=== START OF INFORMATION SECTION ===

Model Family: Maxtor DiamondMax Plus 9

Device Model: Maxtor 6Y080L0

Serial Number: Y23C3N6C

Firmware Version: YAR41BW0

User Capacity: 81,963,220,480 bytes [81,9 GB]

Sector Size: 512 bytes logical/physical

Device is: In smartctl database [for details use: -P show]

ATA Version is: 7

ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0

Local Time is: Wed Oct 26 10:31:09 2011 CEST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 241) seconds.

Offline data collection

capabilities: (0x5b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

No Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

No General Purpose Logging support.

Short self-test routine

recommended polling time: ( 2) minutes.

Extended self-test routine

recommended polling time: ( 37) minutes.

 

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

3 Spin_Up_Time 0x0027 226 226 063 Pre-fail Always - 5664

4 Start_Stop_Count 0x0032 252 252 000 Old_age Always - 3750

5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0

6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0

7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0

8 Seek_Time_Performance 0x0027 253 243 187 Pre-fail Always - 40265

9 Power_On_Minutes 0x0032 177 177 000 Old_age Always - 438h+18m

10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0

11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0

12 Power_Cycle_Count 0x0032 242 242 000 Old_age Always - 4462

192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0

193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0

194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 41

195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 2862

196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0

197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0

198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0

200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0

201 Soft_Read_Error_Rate 0x000a 253 251 000 Old_age Always - 0

202 Data_Address_Mark_Errs 0x000a 253 252 000 Old_age Always - 0

203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0

204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0

205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0

207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0

208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0

209 Offline_Seek_Performnce 0x0024 191 153 000 Old_age Offline - 0

99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0

100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0

101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0

 

SMART Error Log Version: 1

No Errors Logged

 

SMART Self-test log structure revision number 1

No self-tests have been logged. [To run self-tests, use: smartctl -t]

 

 

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

[root@localhost ~]# smartctl -a /dev/sdb

smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.4-desktop-nrj.69mib] (local build)

Copyright © 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

 

=== START OF INFORMATION SECTION ===

Model Family: Maxtor DiamondMax 10 (ATA/133 and SATA/150)

Device Model: Maxtor 6L080L0

Serial Number: L22ME9HG

Firmware Version: BAJ41G20

User Capacity: 81,964,302,336 bytes [81,9 GB]

Sector Size: 512 bytes logical/physical

Device is: In smartctl database [for details use: -P show]

ATA Version is: 7

ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0

Local Time is: Wed Oct 26 10:31:47 2011 CEST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 841) seconds.

Offline data collection

capabilities: (0x5b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

No Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 2) minutes.

Extended self-test routine

recommended polling time: ( 37) minutes.

SCT capabilities: (0x0021) SCT Status supported.

SCT Data Table supported.

 

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

3 Spin_Up_Time 0x0027 227 217 063 Pre-fail Always - 9913

4 Start_Stop_Count 0x0032 252 252 000 Old_age Always - 3541

5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 1

6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0

7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0

8 Seek_Time_Performance 0x0027 244 238 187 Pre-fail Always - 35202

9 Power_On_Minutes 0x0032 187 187 000 Old_age Always - 66h+56m

10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0

11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0

12 Power_Cycle_Count 0x0032 244 244 000 Old_age Always - 3730

192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0

193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0

194 Temperature_Celsius 0x0032 041 253 000 Old_age Always - 42

195 Hardware_ECC_Recovered 0x000a 253 251 000 Old_age Always - 723

196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0

197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0

198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x0008 147 001 000 Old_age Offline - 295

200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0

201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0

202 Data_Address_Mark_Errs 0x000a 253 252 000 Old_age Always - 0

203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0

204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0

205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0

207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0

208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0

209 Offline_Seek_Performnce 0x0024 239 239 000 Old_age Offline - 172

210 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0

211 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0

212 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0

 

SMART Error Log Version: 1

No Errors Logged

 

SMART Self-test log structure revision number 1

No self-tests have been logged. [To run self-tests, use: smartctl -t]

 

 

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

Edited by Kieth

Share this post


Link to post
Share on other sites

Mostly good. You have one reallocated sector on the second test results, but other than that any error values are zeros. Take a closer look, you'll know what to look for, and compare against the results I cut out from your failed disk on the other post, you'll see some of the values I chopped out for you to focus on.

Share this post


Link to post
Share on other sites

Sorry to hijack thread, but can I use smartctl to check hard drives in a onboard raid array?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...