dmzeplin

(Gecko:28826): Gtk-CRITICAL **: file ../../gtk/gtkwidget.c: line 4320 (gtk_widget_get_parent): assertion `GTK_IS_WIDGET (widget)' failed (Gecko:28826): Gtk-CRITICAL **: file ../../gtk/gtkwidget.c: line 4320 (gtk_widget_get_parent): assertion `GTK_IS_WIDGET (widget)' failed (Gecko:28826): Gtk-CRITICAL **: file ../../gtk/gtkwidget.c: line 4320 (gtk_widget_get_parent): assertion `GTK_IS_WIDGET (widget)' failed when I open some executable, or download from internet.... These red tend to appears... Should I neglect them?? Thanks for

I tried to go /etc/hosts, I only access in root; /etc/ and saw hosts in /etc/ but unable to open hosts?? I am pretty still rookie with UNIX stuff.... Also, About Geotmary, is start = 63 too much to start for boot up and run?

Cache = 256 KB Ram = 353/369 MB Swap = 1/494 MB Any tip for an adjust to make it quick respond? Since most application respond real damn slow when I click to executable it? :unsure: I might added: when I typed hdparm /dev/hdx it showed; /dev/hdx: multcount = 8 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 65535/16/63, sectors = 12273597, start = 63 can you explian what multcount and geometry means? Thanks

Something miracle happened! Mplayer is working... Thanks you folks!!

ftp://ftp.free.fr/pub/Distributions_Linux...6.7plf.i586.rpm installing /var/cache/urpmi/rpms/mplayer-gui-1.0-0.pre6.7plf.i586.rpm Preparing... ################################################## 1:mplayer-gui ################################################## look like, nothing happened?? I will try to restart it...

I have uncheck CDs from MCC. and urpmi mplayer, but it said it already installed... I am thinking if I should uninstall mplayer and then reinstall with three uncheck from CDs to have download whole from urpmi? :unsure:

Mind to assist my problem again? Since I have update all such as plf, non-plf, config, and all. I typed urpmi mplayer and download everything itself then it appeared: The following packages have bad signatures: /mnt/cdrom/media/main/fribidi-0.10.4-4mdk.i586.rpm: Invalid Key ID ((sha1) dsa sha1 md5 gpg GPG#26752624 OK) /mnt/cdrom/media/main/libfribidi0-0.10.4-4mdk.i586.rpm: Invalid Key ID ((sha1) dsa sha1 md5 gpg GPG#26752624 OK) /mnt/cdrom/media/main/liblirc0-0.6.6-7mdk.i586.rpm: Invalid Key ID ((sha1) dsa sha1 md5 gpg GPG#26752624 OK) /var/cache/urpmi/rpms/liblzo1-1.08-4mdk.i586.rpm: Invalid Key ID ((sha1) dsa sha1 md5 gpg GPG#26752624 OK) Do you want to continue installation ? (y/N) I clicked Y to continue... then seems success with downloaded.... But I can't find executable mplayer? Does these bad signatures that cause it? Also, I find located mplayer in /usr/bin/mplayer and try to command run it, but nothing happened? :unsure:

I am trying to avoid download from website, only from Urpmi which make my job easier, but if that is successful for you, I am thinking of try it too..

You could also try with 'xpdf'. It's much nicer IMHO. Can you be more clarify of how to get XPDF?

Something interested you have customized. I will compare those later soon.... this gives me a little perplexed.... I am new with Linux and about to throw all windows out soon... But I think this will give me benefits later on. Hope you mind if I save this on my file and compare it later.... Thanks again... Marked the thread Solved - Artificial Intelligence

Perfect! Many thanks for tips! mv 'alphs.jpg' /usr/share/wallpaper definite helped! that is what I was looking for the word for move is MV! whew... Again, many thanks! David

I was wondering if I should uninstall the first Acrobat Reader before I start install the new one? Or just install and overwrite the current Acrobat Reader?? BTW, how is the output? Did it look better from Bittorrent?? Let me know... I have not install yet... David

How am I make any modify *&^.jpg to usr/share/wallpapers in root? In DOS, I believe "move" but in Linux??

I have nice picture and I want to put in background but I need to put *&^.jpg in (usr/share/wallpaper) but it said access denied... But I know it can put.. how can I control? Thanks!

I tried to download from KDS.Look... and it needs to do with CVS which I am not sure what it is?? so I guess I will go and download from RPMDrake but I see: Name: 3ddesktop Version: 0.2.7-0.cvs20040615.1mdk Size: 361 KB Summary: OpenGL virtual desktop switcher Description: 3d Destkop is an OpenGL program for switching virtual desktops in a seamless 3-dimensional manner. The current desktop is mapped into a 3D space where you may choose other screens. When activated the current desktop appears to zoom out into the 3D view. Several different visualization modes are available. You might want to add a keybinding in your window manager for this one. Is this right one? :unsure:

Many thanks for tip about Kweather, that is definietly trick! ha.. Second, where can I find executable for Superkaramba?? I got downloaded from RPMDrake and it is Superkaramba-0.34.... will that be problem?? Is it Minimum .35 only?

Hey, how did you pull up Kweather information since mine keep saying kweather errors! Also, how can you pull up hard drive information etc on desktop? You got nice job on Desktop!

Where can I edit in xplanet? Look like it is in default (/home/myname/.xplanet/config/default)

I found it after it disappeared when rename it to .xplanet from "Open Location". I assume it is supposed to become "invisible" after rename it? I went to console and typed: perl download_clouds.pl, but it said: Can't open perl script "download_clouds.pl": No such file or directory. Look like I didn't success download script?

I am adding one more thing, since the earth looked the same and stay at same position with "south africa"?? no clouds yet... Pray I didn't go any worse??

I was surprised to see what kind of graphic I get from Acrobat Reader?? At first, I tried to get from MCC to install it... but they doesn't have it, I also, urpmi acrobat reader, but it said perl-patchreader or qfaxreader. So, I decided to find RPM from website and found acroread-5.0.10.2.norlug, and installed it. But wow the graphic must be bad... it look like only black and white color and look like 1700's?? Is that supposed to be?? :unsure:

I have followed pretty well with download Xplanet and set up in background without clouds... My questions: 1) obtain a cloud map 2) tell Xplanet to use it What I did step by step, is to click "" to fetch one of script "http://xplanet.nerp.net/clouds_2048.php" by click on it. Then, I returned to Xplanet site, to follow to type for telling Xplanet "/usr/X11R6/share/xplanet/config" in root. I typed in root, "cloud_map=/home/dmzeplin/clouds_2048.jpg". I ALSO, copied folder from /usr/X11R6/share/xplanet/ to /home/dmzeplin/xplanet. Will that be it for now and wait for 3 hours to get clouds involved?

Many thanks for better feedback, and I am thinking of using either one for now untila month then switch to other and compare to see for myself?? However, I know Azureus that I can find source, but Bittorando, I download from contrib, but it said not found?? Thanks again!

Which would you think better Azureus or BitTorando?? Since I am unable to find RPM or source for BitTorando on Mandrake 10.1.... Azureus we have one... But have not install either yet.... I tried Bittorrent but I didn't make it... So, i prefer to get download from RPMDrake... Let me know about your opinions?? :unsure:

Nah, you didn't... I just learned something new about Linux since it is totally different from Winows... Cool anyway... Thanks again! B)