tjansson

The installation is on a server and I never used any 3 party mirros beside plf-free and plf-nonfree. How would you proceed from here? Uninstall the glibc and perl hard and reinstall the rpm or is there another way?

I can't seem to get urpmi to work - I keep getting segmentation faults and these glibc errors. What shoul I do and where should I look for the problem? [root@fermi log]# [root@fermi log]# urpmi.addmedia main ftp://ftp.informatik.hu-berlin.de/pub/Mirrors/ftp.mandrake.com/Mandrakelinux/official/2006.0/i586/ media/main with media_info/synthesis.hdlist.cz Segmentation fault [root@fermi log]# urpmi.addmedia main ftp://ftp.informatik.hu-berlin.de/pub/Mirrors/ftp.mandrake.com/Mandrakelinux/official/2006.0/i586/ media/main with media_info/synthesis.hdlist.cz Segmentation fault [root@fermi log]# urpmi.addmedia main ftp://ftp.informatik.hu-berlin.de/pub/Mirrors/ftp.mandrake.com/Mandrakelinux/official/2006.0/i586/ media/main with media_info/synthesis.hdlist.cz *** glibc detected *** free(): invalid pointer: 0x084936a0 *** Aborted [root@fermi log]# urpmi.addmedia main ftp://ftp.informatik.hu-berlin.de/pub/Mirrors/ftp.mandrake.com/Mandrakelinux/official/2006.0/i586/ media/main with media_info/synthesis.hdlist.cz *** glibc detected *** double free or corruption (!prev): 0x0846af08 *** Aborted [root@fermi log]# urpmi.addmedia main ftp://ftp.informatik.hu-berlin.de/pub/Mirrors/ftp.mandrake.com/Mandrakelinux/official/2006.0/i586/ media/main with media_info/synthesis.hdlist.cz unable to access hdlist file of "updates", medium ignored added medium main wrote config file [/etc/urpmi/urpmi.cfg] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] computing md5sum of existing source hdlist (or synthesis) retrieving source hdlist (or synthesis) of "main"... ftp://ftp.informatik.hu-berlin.de/pub/Mirrors/ftp.mandrake.com/Mandrakelinux/official/2006.0/ i586/media/main/media_info/synthesis.hdlist.cz found probed hdlist (or synthesis) as media_info/synthesis.hdlist.cz ...retrieving done examining hdlist file [/var/cache/urpmi/partial/hdlist.main.cz] examining synthesis file [/var/cache/urpmi/partial/hdlist.main.cz] examining pubkey file of "main"... performing second pass to compute dependencies examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] found 0 headers in cache removing 0 obsolete headers in cache wrote config file [/etc/urpmi/urpmi.cfg] Segmentation fault [root@fermi log]# urpmi.addmedia main ftp://ftp.informatik.hu-berlin.de/pub/Mirrors/ftp.mandrake.com/Mandrakelinux/official/2006.0/ i586/media/main with media_info/synthesis.hdlist.cz medium "main" already exists [root@fermi log]# [moved from Software by spinynorman]

I started the mcc log function and during some other work the i saw the following: 22:11:28 rpmdrake[5191]: ### Program is starting ### 22:12:01 net_applet[3713]: running: /sbin/iwgetid -r eth1 22:12:01 net_applet[3713]: running: /sbin/iwgetid -r -a eth1 22:12:01 net_applet[3713]: running: /sbin/iwlist eth1 scanning 22:13:01 net_applet[3713]: running: /sbin/iwgetid -r eth1 22:13:01 net_applet[3713]: running: /sbin/iwgetid -r -a eth1 22:13:01 net_applet[3713]: running: /sbin/iwlist eth1 scanning 22:14:01 net_applet[3713]: running: /sbin/iwgetid -r eth1 22:14:01 net_applet[3713]: running: /sbin/iwgetid -r -a eth1 22:14:01 net_applet[3713]: running: /sbin/iwlist eth1 scanning 22:15:01 net_applet[3713]: running: /sbin/iwgetid -r eth1 22:15:01 net_applet[3713]: running: /sbin/iwgetid -r -a eth1 22:15:01 net_applet[3713]: running: /sbin/iwlist eth1 scanning 22:16:01 net_applet[3713]: running: /sbin/iwgetid -r eth1 22:16:01 net_applet[3713]: running: /sbin/iwgetid -r -a eth1 22:16:01 net_applet[3713]: running: /sbin/iwlist eth1 scanning 22:17:01 net_applet[3713]: running: /sbin/iwgetid -r eth1 22:17:01 net_applet[3713]: running: /sbin/iwgetid -r -a eth1 22:17:01 net_applet[3713]: running: /sbin/iwlist eth1 scanning Every single minute it is looking for action Wish i just get rid of drakroam and net_applet - it is so irritating

Now there is a bugrepport :D

Hi all First of all my net_applet wan't show up in the kicker dock. I checked that .net_applet says AUTOSTART=TRUE and if I try running the app from the console I get net_applet already running? How do I make it start? The other problems that maybe is realted is that I getting crazy over drakroam up'ing my wifi connection every 10 second or so. I tried to look in dmesg and it seem strange. The last many lines look like this: airo: cmd= 2 airo: status= 7f02 airo: Rsp0= 0 airo: Rsp1= 0 airo: Rsp2= 2eab airo: cmd= 1 airo: status= 7f01 airo: Rsp0= 2 airo: Rsp1= 0 airo: Rsp2= 2eab The macine is a Thinkpad x30 with the airo wireless integrated card which have worked fine since MDK 10.0. The only soloution i have is to stop netplugd, but that's irritating too.

I installede the version for mandriva 10.2 instead and it worked. How do I contact Mandriva to make them fix the package? The file I installed was: http://ftp.ale.org/pub/mirrors/mandrake/of...4-3mdk.i586.rpm

I have used the pms program before on LE 2005, but now it is broken in mandriva 2006. When i try to run the program the program writes: core dumped. your fault! (signal 11) I tried to run the program through gdb: Password Management System 0.94 Program received signal SIGSEGV, Segmentation fault. 0xb7e2ffa7 in fclose () from /lib/tls/libc.so.6 (gdb) How could I solve this?

So the estimated time of arrival is tomorrow. I looking forward -- Do any of you know a mirror to do a netinstall from then?

I'm using LE 2005 on both my laptop and my desktop machine. I use the calender in contact very much and i would great if i could have the both sychronized on both machine. I also have a debian server on a old 233Mhz laptop. So maybe i could use that for sychronization server? I tried slapd but it seemed a little overkill - what would you do?

I writing alot i know - hopefully sombody else can use this for their on debugging. In the /etc/modprobe.conf mcc had put a option radio=0 which failed. After i removed that part the module loaded okay :) Just before i went to bed a found some site saying that one could look in /usr/src/linux/drivers/media/video/saa7134/saa7134.h and look for uncommented cards or something like that and i found a line saying: #define SAA7135_BOARD_ASUSTeK_TVFM7135 53 In the file /usr/src/linux/drivers/media/video/saa7134/saa7134-cards.c i found [SAA7135_BOARD_ASUSTeK_TVFM7135] = { .name = "ASUS TV-FM 7135", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_TDA8290, .gpiomask = 0x200000, .inputs = {{ .name = name_tv, .vmux = 1, .amux = TV, .gpio = 0x0000, .tv = 1, },{ .name = name_comp1, .vmux = 4, .amux = LINE2, .gpio = 0x0000, },{ .name = name_svideo, .vmux = 6, .amux = LINE2, .gpio = 0x0000, }}, .radio = { .name = name_radio, .amux = TV, .gpio = 0x200000, }, which makes me belive that the tuner is a TDA8290. However this i maybe not supported in linux if I am to belive linuxtv.org. I tried to make to see if xawtv would work but I guess that either the tuner part is wrong or something else. I did modprobe saa7134 card=53 and xawtv gave me: /dev/video1: OK [ -device /dev/video1 ] type : v4l2 name : UNKNOWN/GENERIC flags: overlay capture tuner

I was playing around and tried to do a modprobe - which failed? [root@newton tjansson]# modprobe saa7134 FATAL: Error inserting saa7134 (/lib/modules/2.6.11-6mdk/kernel/drivers/media/video/saa7134/saa7134.ko.gz): Unknown symbol in module, or unknown parameter (seedmesg) Dmesg the writes: saa7134: Unknown parameter `radio' Do you know if this is normal or the main problem? /Thomas

Hi again - sounds great that the card is actually supported by linux! Well here goes mplayer: [tjansson@newton ~]$ mplayer tv:// MPlayer 1.0pre7-3.4.3 (C) 2000-2005 MPlayer Team CPU: Intel Pentium 4/Xeon/Celeron Foster (Family: 8, Stepping: 4) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled with runtime CPU detection - WARNING - this is not optimal! To get best performance, recompile MPlayer with --disable-runtime-cpudetection. 85 audio & 196 video codecs Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts. Opening joystick device /dev/input/js0 Can't open joystick device /dev/input/js0 : No such file or directory Can't init input joystick Setting up LIRC support... mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. Cache fill: 0.00% (0 bytes) TV detected!;-) Selected driver: dummy name: NULL-TV author: alex Selected input hasn't got a tuner! vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local display) ========================================================================== Opening video decoder: [raw] RAW Uncompressed Video VDec: vo config request - 320 x 200 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. VO: [xv] 320x200 => 320x200 Planar YV12 [zoom] Selected video codec: [rawyv12] vfm:raw (RAW YV12) ========================================================================== Audio: no sound Starting playback... No bind found for key MOUSE_BTN0 V: 1.0 14999/14999 ??% ??% ??,?% 0 0 0% I got a green screen and nothing happend until i exit the program. A funny thing is that the KDETV icon on the desktop isn't there anymore, so guess i have unset som settings again. Anyways in mcc i did the config and chose 7134 as the driver and autodectect to the tuner part. :) Kind regards Thomas Jansson

The problem is that only Asus TV-FM 7133 and 7134 are listed. Mine is a 7135. Somethings have changed though through the last few days i played around with alot of settings and at one point the kdetv icon appeared automatically on the desktop after boot and showed ASUS TV-FM 7133 card - but eventhough i tried to scan through the channels i did not find anything and kradio didn't work either?

The little remote that was included in the package work somehow! I can make it close windows and bring up the printing diaglog in firefox? Will start look for a something to config it with! :)

Hi all I just bought a ASUS TV-FM tuner 7135 card, but I can't make it work. I found a picture and description at bttv under ASUS TVFM7135 (B-TV7135FM-ENG-R1.0). When doing lspci -v: 02:00.0 Multimedia controller: Philips Semiconductors SAA713X Audio+video broadcast decoder (rev f0) Subsystem: ASUSTeK Computer Inc.: Unknown device 4845 Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at eb003000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 and lspci [root@newton etc]# lspci | grep SAA 02:00.0 Multimedia controller: Philips Semiconductors SAA713X Audio+video broadcast decoder (rev f0) Kdetv see my card as a 7133 card but it is not possible to see the chanels. Kradio doesn't show any channels either. Kind regards Thomas Jansson

Hi all I just started using Mandriva LE, which is really nice! However the problem is that I can't seem to restart or shutdown from the logout button in the menu? How do I enable this again? Furthermore I can find the "New session" button in the menu anymore either? Thomas Jansson

A little update I tried some more this evening and found that by pxe install is looping after downloading the stage2 thing both with the boot.iso and the Mandrakelinux-10.1-Official-Mini.i586.iso. The problem I have i think is shown when i press CTRL-F3 and see the logs. Here are the last 3 lines: * HTTP: server respons '200' * HTTP: size of download 16965535 bytes * writing ramdisk: No space left on device. So It seems that there is some ramdisk problem. I once had a USB floppy driver and did network installation of mandrake 10.0 on the laptop. This makes me think that the problem is not in the laptop it self but in the software.

I had the same problems with Mandrake 10.1 and i followed the guide on USB stick survival guide After that the stick was easily detected by Mandrake 10.1

I have a Thinkpad X30 without CD and floppy drives so I would be great option for me to be able to boot mandrake from a USB-pen. My lilo is messed up so at the moment i really need some kind linux on a stick to boot on. I tried Damn small linux but would always prefer Mandrake! :-)

Hi all I have setup the PXE server on my mandrake 10.1 Desktop. I have a Thinkpad X30 wich I would like to install mandrake 10.1 on as well. I followed the manual on groundstate.ca/diskless which did the trick (except that drakwizard at a certain point should be drakepxelinux instead). It all worked up to the point right after i got the stage2 thing download on my X30. The the whole network install thing restarted and by pushin' CTRL-F3 i saw that it said something like "... ramdisk full ... ". Unfortunately i can remember it all. Since the desktop machine on which i'm writing is the only one working . Does anybody know how to solve this problem?