garrop

Hello, From zoneedit.com: ----------------------------------- From one of our customers: It's very easy to update the dynamic zoneedit entries on UNIX with either of these two command lines (if you have wget or lynx installed): lynx -source -auth=username:password 'http://dynamic.zoneedit.com/auth/dynamic.html?host=www.mydomain.com' wget -O - --http-user=username --http-passwd=password 'http://dynamic.zoneedit.com/auth/dynamic.html?host=www.mydomain.com' PPP users should place one of the above commands (or a perl client) in the file /etc/ppp/ip-up or /etc/ppp/ppp.linkup, which are called whenever a ppp connection is made. Users of dhcpcd may place these commands in the file /etc/dhcpc/dhcpcd-eth0.exe or /etc/dhcpc/dhcpcd-eth1.exe which are executed whenever a new dynamic IP address is acquired ----------------------------------------------- I have created the sh file and locate it within the cron.hourly directory. It is working fine, but it sends requests every hour even if it is not needed. How can avoid this and send a request only after my ip is changed? I have looked for the files indicated by zoneedit.com, but can not find them within Mandrake 10.1 Any help will be greatly appreciated.

Thanks for your help. main.cf included the info you are suggesting. In the meantime, I found where the main problem was: A typo in the MX redirection at zoneedti.com (I have dynamic IP) Now the emails arrive ok, but they are not delivered to the local user. They instead are queued within the macine (I can see them at webmin / postfix / queue) So my big question is: why local email does not work. I include about what is going on: -------------------------------- Feb 21 20:01:17 webmaster postfix/pickup[24913]: 25980985D: uid=0 from=<root> Feb 21 20:01:17 webmaster postfix/cleanup[26867]: 25980985D: message-id=<20050221190117.25980985D@localhost> Feb 21 20:01:17 webmaster postfix/qmgr[25806]: 25980985D: from=<root@xxxxx.com>, size=2043, nrcpt=1 (queue active) Feb 21 20:04:24 webmaster postfix/smtpd[27023]: connect from webmail-out.tiscali.fr[213.36.80.105] Feb 21 20:04:24 webmaster postfix/smtpd[27023]: 562969853: client=webmail-out.tiscali.fr[213.36.80.105] Feb 21 20:04:24 webmaster postfix/cleanup[27024]: 562969853: message-id=<IC9ZBS$D7EA95D8178A7FF7DD67821615AEC27A@tiscali.fr> Feb 21 20:04:24 webmaster postfix/qmgr[25806]: 562969853: from=<jerry@libertysurf.fr>, size=1265, nrcpt=1 (queue active) Feb 21 20:04:47 webmaster postfix/smtpd[27023]: disconnect from webmail-out.tiscali.fr[213.36.80.105] ------------------------------- Many thanks in advance.

Sorry to ask again. I have checked my firewall and all ports are open. The problem must be in the conf file. In fact, I can not send email to local users. Although emails to outside peolple goes through ok, when sending email to local users all email stays on the mail queue I see with webmin. On the other hand, when sending mails from the outside, the sender gets the error: Technical details of permanent failure: TEMP_FAILURE: Could not initiate SMTP conversation with any hosts: I have configured the main.cf according to postfix.org, but I must have something wrong there. Any help would be extremely appreciated, for I have spent the whole evening trying to figure this out.

Hi to everyone, I am trying to run my own mail server. Installed postfix with 10.1. Outbound emails work fine after I tunned the main.cf file. However, when I reply to my emails, this is what I get: -------------------------------------------- This is an automatically generated Delivery Status Notification THIS IS A WARNING MESSAGE ONLY. YOU DO NOT NEED TO RESEND YOUR MESSAGE. Delivery to the following recipient has been delayed: capncrunch@xxxxxxx.com Message will be retried for 2 more day(s) Technical details of temporary failure: TEMP_FAILURE: Could not initiate SMTP conversation with any hosts: [ruby.xxxxxxxx.com (1): Connection timed out] ----- Message header follows ----- Received: by 10.38.101.54 with SMTP id y54mr6104rnb; Sat, 12 Feb 2005 08:07:49 -0800 (PST) Received: by 10.38.97.27 with HTTP; Sat, 12 Feb 2005 08:07:49 -0800 (PST) Message-ID: <c7200bce050212080755700167@mail.gmail.com> Date: Sat, 12 Feb 2005 11:07:49 -0500 From: Richard <yyyyyyyyy@gmail.com> Reply-To: Richard <yyyyyyyyyyy@gmail.com> To: capncrunch@xxxxxxx.com Subject: Here it is Mime-Version: 1.0 -------------------------------------------------------------- I have opened the ports on my router and redirected them to my PC. My ISP claims they have not closed either 25 or 110. I have checked the postfix documetnation, but I have been unable to find any similar problems there. Can anybody help me? Many thanks. Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit

Hi, I am having trouble receiving emails through postfix. My emails are sent ok, but I can not receive any. It seems it might be a problem with my ISP and the ports 25 & 110. While I try to solve the issue with them, I also have this problem with Mandrake 10.1: [jerry@localhost jerry]$ mail josie Subject: hello It does not work . Cc: [jerry@localhost jerry]$ su josie Password: [josie@localhost jerry]$ mail No mail for josie [josie@localhost jerry]$ Any ideas why local mail does not work. I guarantee that I have tried to find any solution on the net, but have not found anybody with such a simple problem. Do I have to say I am a newbie? Many thanks in advance,

I think I will try to do what you suggest on another laptop and if I succeed will come back to my machine. If not, I will be patient. In any case, I will let you know how I am doing. Many thanks for your help. kepa

I understand "unknown device e201" is the soundcard (see bellow) [root@webmaster alsa-driver-1.0.8]# lspci -v 00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] #09 [2109] 00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: ff200000-ff2fffff Prefetchable memory behind bridge: bf900000-bf9fffff Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [a0] #10 [0141] 00:02.0 VGA compatible controller: Intel Corp. 82915G Express Chipset Family Graphics Controller (rev 04) (prog-if 00 [VGA]) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at ffa80000 (32-bit, non-prefetchable) I/O ports at ec00 Memory at d0000000 (32-bit, prefetchable) Memory at ffa40000 (32-bit, non-prefetchable) Capabilities: [d0] Power Management version 2 00:02.1 Display controller: Intel Corp. 82915G Express Chipset Family Graphics Controller (rev 04) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, fast devsel, latency 0 Memory at ff980000 (32-bit, non-prefetchable) Capabilities: [d0] Power Management version 2 00:1b.0 Class 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Intel Corp.: Unknown device e201 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at ffa3c000 (64-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] #10 [0091] 00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: ff600000-ff6fffff Prefetchable memory behind bridge: 00000000bfd00000-00000000bfd00000 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: ff500000-ff5fffff Prefetchable memory behind bridge: 00000000bfc00000-00000000bfc00000 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 00:1c.2 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: ff400000-ff4fffff Prefetchable memory behind bridge: 00000000bfb00000-00000000bfb00000 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 00:1c.3 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: ff300000-ff3fffff Prefetchable memory behind bridge: 00000000bfa00000-00000000bfa00000 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [uHCI]) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, medium devsel, latency 0, IRQ 23 I/O ports at c800 00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [uHCI]) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at cc00 00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [uHCI]) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at d000 00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [uHCI]) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at d400 00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at ffa3bc00 (32-bit, non-prefetchable) Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [20a0] 00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3) (prog-if 01 [subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: ff700000-ff7fffff Prefetchable memory behind bridge: 00000000bfe00000-00000000bfe00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at ffa0 00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corp.: Unknown device 4c58 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 19 I/O ports at e800 I/O ports at e400 I/O ports at e000 I/O ports at dc00 I/O ports at d800 Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) Subsystem: Intel Corp.: Unknown device 4c58 Flags: medium devsel, IRQ 19 I/O ports at c400 06:08.0 Ethernet controller: Intel Corp.: Unknown device 1064 (rev 01) Subsystem: Intel Corp.: Unknown device 305d Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at ff7ff000 (32-bit, non-prefetchable) I/O ports at bc00 Capabilities: [dc] Power Management version 2 ] -------------------------------------- urpmi pciutils says all is installed. and the modprobe snd-azx: FATAL: Module snd-azx not found Nevertheless, I have started alsa: [root@webmaster alsa-driver-1.0.8]# service alsa start ALSAren 1.0.6 bertsioa abiarazten: intel8x0. [ ADOS ] alsactl egiten nahastailearen ezarpenak leheneratzeko... [ ADOS ] ADOS means it is OK . I have alsa-utils 1.0.8 installed, but it does start alsa 1.0.6 Somehow, I know I will reach to hear the sound of my machine.... thanks once again. kepa

"Mandrake found all the hardware ok (will not try with my HP 3750 scanner, though), but the audio souncard is not there." Unfortunately MCC does not find my soundcard. It sees a device on the I/P Hub Audio, but it does not recognyze it. Thus, I guess I need to go for the urpmi kernel. I am afraid I might damage something if I go that way. Any references where I can find the way to do it (HOWTO for dummies or anything alike) Thanks, kepa

You're not using urpmi to install software :). Alsa 1.0.8 can be found at thac's ( http://rpm.nyvalls.se/sound10.1.html ). Read the FAQs how to use urpmi. To give you a fast start: open a console and log in as root. Copy and past this: urpmi.addmedia thacs.rpms http://rpm.nyvalls.se/10.1/RPMS with hdlist.cz in the console. Type, still as root, urpmi alsa. That should be it. Good luck. <{POST_SNAPBACK}> Devries, Many thanks again. I have installed the utils package as adviced. However, when I run alsaconf (1.0.8), the system still does not find my soundcard. I guess this is because I have not installed the latest drivers (alsa-drivers-1.0.8) I have not found an rpm with those drivers in the page you mention or in any other. The one I dowloaded form the alsa website is not working for the above explainded reasons: [root@webmaster alsa-driver-1.0.8]# ./configure checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking whether time.h and sys/time.h may both be included... yes checking whether gcc needs -traditional... no checking for current directory... /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8 checking cross compile... checking for directory with kernel source... /usr/src/linux checking for directory with kernel build... checking for kernel version... 0.0.0 checking for GCC version... Kernel compiler: Used compiler: gcc (GCC) 3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk) *** NO PREDEFINED KERNEL COMPILER IS DETECTED *** Assuming the same compiler is used with the current system compiler. *** Please make sure that the same compiler version was used for building kernel. checking for built-in ALSA... "no" checking for existing ALSA module... "no" checking for Red Hat kernel... "auto" checking for Red Hat kernel... "no" checking for SUSE kernel... "auto" checking for SUSE kernel... "no" checking to modify of kernel linux/kmod.h... "yes" cat: /usr/src/linux/include/linux/kmod.h: No such file or directory checking for kernel linux/compiler.h... "no" checking for kernel linux/pm.h... "no" checking for kernel linux/spinlock.h... "no" checking for kernel linux/irq.h... "no" checking for kernel linux/threads.h... "no" checking for kernel linux/rwsem.h... "no" checking for kernel linux/gameport.h... "no" checking for kernel linux/devfs_fs_kernel.h... "no" checking for kernel linux/highmem.h... "no" checking for kernel linux/workqueue.h... "no" checking for kernel linux/dma-mapping.h... "no" checking for kernel asm/hw_irq.h... "no" checking for kernel linux/device.h... "no" checking for kernel linux/jiffies.h... "no" checking for kernel linux/compat.h... "no" checking for kernel linux/adb.h... "no" checking for kernel linux/cuda.h... "no" checking for kernel linux/pmu.h... "no" checking for kernel linux/moduleparam.h... "no" checking for kernel linux/syscalls.h... "no" checking for kernel linux/firmware.h... "no" checking for exported symbol dump_stack... grep: /usr/src/linux/kernel/ksyms.c: No such file or directory "no" checking for kernel module symbol versions... "no" checking for PCI support in kernel... "no" checking for I2C driver in kernel... unknown checking for firmware loader... unknown checking for SGI/MIPS (HAL2) architecture... "no" checking for directory to store kernel modules... /lib/modules/0.0.0/misc checking for verbose printk... on checking for debug level... none checking for processor type... "unknown" checking for SMP... "no" checking for ISA PnP driver in kernel... no checking for PnP driver in kernel... no checking for ISA PnP support... yes checking for strlcpy... "no" checking for snprintf... "no" checking for scnprintf... "no" checking for sscanf... "no" checking for vmalloc_to_page... "no" checking for old kmod... "yes" checking for PDE... "no" checking for pci_set_consistent_dma_mask... "no" checking for pci_dev_present... "no" checking for tty->count is the atomic type... "no" checking for remap_pfn_range... "no" checking for new remap_page_range... "no" checking for kcalloc... "no" checking for saved_config_space in pci_dev... "no" checking for acpi_register_gsi... "no" checking for old kill_fasync... "no" checking for dma_addr_t... "no" checking for MUTEX macros... "no" checking for driver version... 1.0.8 checking for sequencer support... yes checking for OSS/Free emulation... yes checking for RTC callback support in kernel... "no" checking for Procfs support... "no" checking for USB support... "no" checking for USB module support... "no" checking for kernel PCMCIA checking for PCMCIA support... "no" checking for PCMCIA module support... "no" checking for PC9800 support in kernel... "no" checking for parallel port support... "no" checking for parallel port module support... "no" checking for which soundcards to compile driver for... all configure: creating ./config.status config.status: creating version config.status: creating Makefile.conf config.status: creating snddevices config.status: creating utils/alsa-driver.spec config.status: creating utils/buildrpm config.status: creating toplevel.config config.status: creating utils/alsasound config.status: creating utils/alsasound.posix config.status: creating include/config.h config.status: include/config.h is unchanged config.status: creating include/config1.h config.status: include/config1.h is unchanged config.status: creating include/version.h config.status: include/version.h is unchanged config.status: creating include/autoconf-extra.h config.status: include/autoconf-extra.h is unchanged [root@webmaster alsa-driver-1.0.8]# make make[1]: Entering directory `/home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/acore' gcc -D__KERNEL__ -DMODULE=1 -I/home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include -I/usr/src/linux/include -O2 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -DALSA_BUILD -nostdinc -iwithprefix include -DEXPORT_SYMTAB -c memalloc.c In file included from memalloc.c:1: memalloc.inc:1:26: linux/config.h: No such file or directory memalloc.inc:2:27: linux/version.h: No such file or directory memalloc.inc:4:40: missing binary operator before token "(" memalloc.inc:12:23: linux/pci.h: No such file or directory In file included from memalloc.inc:14, from memalloc.c:1: /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:27:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:30:41: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:35:43: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:39:63: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:51:26: linux/module.h: No such file or directory /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:60:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:70:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:185:24: linux/wait.h: No such file or directory /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:187:41: missing binary operator before token "(" In file included from memalloc.inc:14, from memalloc.c:1: /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:231: error: syntax error before "snd_compat_strlcpy" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:231: error: syntax error before "size_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:231: warning: type defaults to `int' in declaration of `snd_compat_strlcpy' /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:231: warning: function declaration isn't a prototype /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:231: warning: data definition has no type or storage class /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:233: error: syntax error before "snd_compat_strlcat" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:233: error: syntax error before "size_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:233: warning: type defaults to `int' in declaration of `snd_compat_strlcat' /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:233: warning: function declaration isn't a prototype /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:233: warning: data definition has no type or storage class In file included from memalloc.inc:14, from memalloc.c:1: /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:239: error: syntax error before "size_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:239: warning: function declaration isn't a prototype /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:240: error: syntax error before "size_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:240: warning: function declaration isn't a prototype /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:258:62: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:270:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:306:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:431:41: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:450:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:474:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:484:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:499:41: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:509:41: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:524:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:531:42: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:536:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:540:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:547:40: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:559:42: missing binary operator before token "(" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:590: warning: "struct pci_device_id" declared inside parameter list /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:590: warning: its scope is only this definition or declaration, which is probably not what you want /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:607: error: syntax error before "n" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/adriver.h:607: warning: function declaration isn't a prototype In file included from memalloc.c:1: memalloc.inc:16:40: missing binary operator before token "(" memalloc.inc:31:40: missing binary operator before token "(" memalloc.c:27:27: linux/proc_fs.h: No such file or directory memalloc.c:28:24: linux/init.h: No such file or directory memalloc.c:30:24: linux/slab.h: No such file or directory memalloc.c:31:22: linux/mm.h: No such file or directory memalloc.c:34:27: asm/semaphore.h: No such file or directory In file included from memalloc.c:35: /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:60: error: syntax error before "dma_addr_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:60: warning: no semicolon at end of struct or union /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:61: warning: type defaults to `int' in declaration of `bytes' /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:61: warning: data definition has no type or storage class /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:63: error: syntax error before '}' token /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:70: error: syntax error before "dma_addr_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:70: warning: no semicolon at end of struct or union /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:85: error: syntax error before "size" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:86: warning: function declaration isn't a prototype /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h: In function `snd_sgbuf_aligned_pages': /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:87: error: `size' undeclared (first use in this function) /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:87: error: (Each undeclared identifier is reported only once /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:87: error: for each function it appears in.) /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:87: error: `PAGE_SIZE' undeclared (first use in this function) /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:87: error: `PAGE_SHIFT' undeclared (first use in this function) /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h: At top level: /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:93: error: syntax error before "snd_sgbuf_get_addr" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:93: error: syntax error before "size_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:94: warning: return type defaults to `int' /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:94: warning: function declaration isn't a prototype /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h: In function `snd_sgbuf_get_addr': /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:95: error: `sgbuf' undeclared (first use in this function) /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:95: error: `offset' undeclared (first use in this function) /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:95: error: `PAGE_SHIFT' undeclared (first use in this function) /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:95: error: `PAGE_SIZE' undeclared (first use in this function) /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h: At top level: /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:100: error: syntax error before "size_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:101: warning: function declaration isn't a prototype /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:102: error: syntax error before "size_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:103: warning: function declaration isn't a prototype /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:110: error: syntax error before "snd_dma_get_reserved_buf" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:110: warning: type defaults to `int' in declaration of `snd_dma_get_reserved_buf' /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:110: warning: data definition has no type or storage class /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:114: error: syntax error before "size" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:114: warning: function declaration isn't a prototype /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:115: error: syntax error before "size_t" /home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/include/sound/memalloc.h:115: warning: function declaration isn't a prototype memalloc.c:41: error: syntax error before string constant memalloc.c:41: warning: type defaults to `int' in declaration of `MODULE_AUTHOR' memalloc.c:41: warning: function declaration isn't a prototype memalloc.c:41: warning: data definition has no type or storage class memalloc.c:42: error: syntax error before string constant memalloc.c:42: warning: type defaults to `int' in declaration of `MODULE_DESCRIPTION' memalloc.c:42: warning: function declaration isn't a prototype memalloc.c:42: warning: data definition has no type or storage class memalloc.c:43: error: syntax error before string constant memalloc.c:43: warning: type defaults to `int' in declaration of `MODULE_LICENSE' memalloc.c:43: warning: function declaration isn't a prototype memalloc.c:43: warning: data definition has no type or storage class memalloc.c:61: error: syntax error before "size_t" memalloc.c:62: warning: function declaration isn't a prototype memalloc.c:68: warning: type defaults to `int' in declaration of `DECLARE_MUTEX' memalloc.c:68: warning: parameter names (without types) in function declaration memalloc.c:69: warning: type defaults to `int' in declaration of `LIST_HEAD' memalloc.c:69: warning: parameter names (without types) in function declaration memalloc.c:73: error: field `buffer' has incomplete type memalloc.c:75: error: field `list' has incomplete type memalloc.c:97:41: missing binary operator before token "(" memalloc.c:138:41: missing binary operator before token "(" memalloc.c: In function `mark_pages': memalloc.c:247: error: invalid use of undefined type `struct page' memalloc.c:249: warning: implicit declaration of function `SetPageReserved' memalloc.c:249: error: increment of pointer to unknown structure memalloc.c:249: error: arithmetic on pointer to an incomplete type memalloc.c: In function `unmark_pages': memalloc.c:254: error: invalid use of undefined type `struct page' memalloc.c:256: warning: implicit declaration of function `ClearPageReserved' memalloc.c:256: error: increment of pointer to unknown structure memalloc.c:256: error: arithmetic on pointer to an incomplete type memalloc.c: At top level: memalloc.c:268: error: syntax error before "size" memalloc.c:269: warning: function declaration isn't a prototype memalloc.c: In function `snd_malloc_pages': memalloc.c:275: warning: implicit declaration of function `get_order' memalloc.c:275: error: `size' undeclared (first use in this function) memalloc.c:276: warning: implicit declaration of function `__get_free_pages' memalloc.c:276: error: `gfp_flags' undeclared (first use in this function) memalloc.c:276: error: `NULL' undeclared (first use in this function) memalloc.c:277: warning: implicit declaration of function `virt_to_page' memalloc.c:277: warning: passing arg 1 of `mark_pages' makes pointer from integer without a cast memalloc.c: At top level: memalloc.c:290: error: syntax error before "size_t" memalloc.c:291: warning: function declaration isn't a prototype memalloc.c: In function `snd_free_pages': memalloc.c:294: error: `ptr' undeclared (first use in this function) memalloc.c:294: error: `NULL' undeclared (first use in this function) memalloc.c:296: error: `size' undeclared (first use in this function) memalloc.c:298: warning: passing arg 1 of `unmark_pages' makes pointer from integer without a cast memalloc.c:299: warning: implicit declaration of function `free_pages' memalloc.c: At top level: memalloc.c:309: error: syntax error before "size_t" memalloc.c:310: warning: function declaration isn't a prototype memalloc.c: In function `snd_malloc_dev_pages': memalloc.c:317: error: `size' undeclared (first use in this function) memalloc.c:319: error: `GFP_KERNEL' undeclared (first use in this function) memalloc.c:320: error: `__GFP_NORETRY' undeclared (first use in this function) memalloc.c:320: error: `__GFP_NOWARN' undeclared (first use in this function) memalloc.c:321: warning: implicit declaration of function `pci_alloc_consistent' memalloc.c:321: error: `dev' undeclared (first use in this function) memalloc.c:321: error: `PAGE_SIZE' undeclared (first use in this function) memalloc.c:321: error: `dma' undeclared (first use in this function) memalloc.c:321: warning: assignment makes pointer from integer without a cast memalloc.c:322: error: `NULL' undeclared (first use in this function) memalloc.c:324: warning: passing arg 1 of `mark_pages' makes pointer from integer without a cast memalloc.c: At top level: memalloc.c:333: error: syntax error before "size_t" memalloc.c:335: warning: function declaration isn't a prototype memalloc.c: In function `snd_free_dev_pages': memalloc.c:338: error: `ptr' undeclared (first use in this function) memalloc.c:338: error: `NULL' undeclared (first use in this function) memalloc.c:340: error: `size' undeclared (first use in this function) memalloc.c:343: warning: passing arg 1 of `unmark_pages' makes pointer from integer without a cast memalloc.c:345: warning: implicit declaration of function `pci_free_consistent' memalloc.c:345: error: `dev' undeclared (first use in this function) memalloc.c:345: error: `PAGE_SIZE' undeclared (first use in this function) memalloc.c:345: error: `dma' undeclared (first use in this function) memalloc.c: At top level: memalloc.c:401: error: syntax error before "size_t" memalloc.c:403: warning: function declaration isn't a prototype memalloc.c: In function `snd_dma_alloc_pages': memalloc.c:407: error: `dmab' undeclared (first use in this function) memalloc.c:407: error: `type' undeclared (first use in this function) memalloc.c:408: error: `device' undeclared (first use in this function) memalloc.c:412: error: `size' undeclared (first use in this function) memalloc.c:424: error: `NULL' undeclared (first use in this function) memalloc.c:427: warning: implicit declaration of function `printk' memalloc.c:427: error: `KERN_ERR' undeclared (first use in this function) memalloc.c:427: error: syntax error before string constant memalloc.c:430: error: `ENXIO' undeclared (first use in this function) memalloc.c:433: error: `ENOMEM' undeclared (first use in this function) memalloc.c: At top level: memalloc.c:453: error: syntax error before "size_t" memalloc.c:455: warning: function declaration isn't a prototype memalloc.c: In function `snd_dma_alloc_pages_fallback': memalloc.c:461: error: `type' undeclared (first use in this function) memalloc.c:461: error: `device' undeclared (first use in this function) memalloc.c:461: error: `size' undeclared (first use in this function) memalloc.c:461: error: `dmab' undeclared (first use in this function) memalloc.c:462: error: `ENOMEM' undeclared (first use in this function) memalloc.c:465: error: `PAGE_SIZE' undeclared (first use in this function) memalloc.c: In function `snd_dma_free_pages': memalloc.c:482: error: dereferencing pointer to incomplete type memalloc.c:484: error: dereferencing pointer to incomplete type memalloc.c:484: error: dereferencing pointer to incomplete type memalloc.c:492: error: dereferencing pointer to incomplete type memalloc.c:492: error: dereferencing pointer to incomplete type memalloc.c:492: error: dereferencing pointer to incomplete type memalloc.c:492: error: dereferencing pointer to incomplete type memalloc.c:498: error: `KERN_ERR' undeclared (first use in this function) memalloc.c:498: error: syntax error before string constant memalloc.c: At top level: memalloc.c:513: error: syntax error before "snd_dma_get_reserved_buf" memalloc.c:514: warning: return type defaults to `int' memalloc.c: In function `snd_dma_get_reserved_buf': memalloc.c:520: warning: implicit declaration of function `down' memalloc.c:520: error: `list_mutex' undeclared (first use in this function) memalloc.c:521: warning: implicit declaration of function `list_for_each' memalloc.c:521: error: `mem_list_head' undeclared (first use in this function) memalloc.c:521: error: syntax error before '{' token memalloc.c:524: warning: implicit declaration of function `memcmp' memalloc.c:524: error: dereferencing pointer to incomplete type memalloc.c:524: error: dereferencing pointer to incomplete type memalloc.c:525: warning: implicit declaration of function `list_del' memalloc.c:526: error: dereferencing pointer to incomplete type memalloc.c:527: warning: implicit declaration of function `kfree' memalloc.c:528: warning: implicit declaration of function `up' memalloc.c:529: error: dereferencing pointer to incomplete type memalloc.c: At top level: memalloc.c:532: error: syntax error before '&' token memalloc.c:532: warning: type defaults to `int' in declaration of `up' memalloc.c:532: warning: function declaration isn't a prototype memalloc.c:532: warning: data definition has no type or storage class memalloc.c: In function `snd_dma_reserve_buf': memalloc.c:550: warning: implicit declaration of function `kmalloc' memalloc.c:550: error: `GFP_KERNEL' undeclared (first use in this function) memalloc.c:550: warning: assignment makes pointer from integer without a cast memalloc.c:552: error: `ENOMEM' undeclared (first use in this function) memalloc.c:553: error: `list_mutex' undeclared (first use in this function) memalloc.c:554: error: dereferencing pointer to incomplete type memalloc.c:556: warning: implicit declaration of function `list_add_tail' memalloc.c:556: error: `mem_list_head' undeclared (first use in this function) memalloc.c: In function `free_all_reserved_pages': memalloc.c:569: error: `list_mutex' undeclared (first use in this function) memalloc.c:570: warning: implicit declaration of function `list_empty' memalloc.c:570: error: `mem_list_head' undeclared (first use in this function) memalloc.c:572: warning: implicit declaration of function `list_entry' memalloc.c:572: error: syntax error before "struct" memalloc.c: At top level: memalloc.c:700: error: syntax error before "snd_mem_init" memalloc.c:701: warning: return type defaults to `int' memalloc.c:709: error: syntax error before "snd_mem_exit" memalloc.c:710: warning: return type defaults to `int' memalloc.c: In function `snd_mem_exit': memalloc.c:711: warning: implicit declaration of function `remove_proc_entry' memalloc.c:711: error: `NULL' undeclared (first use in this function) memalloc.c:714: error: `KERN_ERR' undeclared (first use in this function) memalloc.c:714: error: syntax error before string constant memalloc.c:714: warning: left-hand operand of comma expression has no effect memalloc.c:714: error: syntax error before ')' token memalloc.c: At top level: memalloc.c:719: error: syntax error before "module_exit" memalloc.c:725: error: syntax error before "EXPORT_SYMBOL" memalloc.c:725: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.c:725: warning: parameter names (without types) in function declaration memalloc.c:725: warning: data definition has no type or storage class memalloc.c:726: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.c:726: warning: parameter names (without types) in function declaration memalloc.c:726: warning: data definition has no type or storage class memalloc.c:727: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.c:727: warning: parameter names (without types) in function declaration memalloc.c:727: warning: data definition has no type or storage class memalloc.c:729: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.c:729: warning: parameter names (without types) in function declaration memalloc.c:729: warning: data definition has no type or storage class memalloc.c:730: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.c:730: warning: parameter names (without types) in function declaration memalloc.c:730: warning: data definition has no type or storage class memalloc.c:732: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.c:732: warning: parameter names (without types) in function declaration memalloc.c:732: warning: data definition has no type or storage class memalloc.c:733: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.c:733: warning: parameter names (without types) in function declaration memalloc.c:733: warning: data definition has no type or storage class In file included from memalloc.c:735: memalloc.inc1:2:40: missing binary operator before token "(" In file included from memalloc.c:735: memalloc.inc1:31: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.inc1:31: warning: parameter names (without types) in function declaration memalloc.inc1:31: warning: data definition has no type or storage class memalloc.inc1:34: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.inc1:34: warning: parameter names (without types) in function declaration memalloc.inc1:34: warning: data definition has no type or storage class memalloc.inc1:35: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.inc1:35: warning: parameter names (without types) in function declaration memalloc.inc1:35: warning: data definition has no type or storage class memalloc.inc1:39: warning: type defaults to `int' in declaration of `EXPORT_SYMBOL' memalloc.inc1:39: warning: parameter names (without types) in function declaration memalloc.inc1:39: warning: data definition has no type or storage class memalloc.c:68: warning: 'DECLARE_MUTEX' declared `static' but never defined memalloc.c:69: warning: 'LIST_HEAD' declared `static' but never defined make[1]: *** [memalloc.o] Error 1 make[1]: Leaving directory `/home/jerry/myfiles/audiodrivers/alsa-driver-1.0.8/acore' make: *** [compile] Error 1 Can you help me there too? I really appreciate your help, kepa

First of all thanks for your quick answer. I could not find your link in the ALSA in my previous research I am trying to upgrado to alsa 1.0.8.as neccessary. First of all I uninstalled the previous version through rpmdrake (This caused some trouble because I asked me to remove several packages along withthe libraries). Afterwards, I have installed correctly the library 1.0.8, OSS compt. library and firmware 1.0.8. However, both the driver and the utility packages give me an error and do no let me install. Configure goes through ok, but make : ..... Making all in po make[2]: Entering directory `/home/jerry/myfiles/audiodrivers/alsa-utils-1.0.8/alsaconf/po' mv: cannot stat `t-ja.gmo': No such file or directory make[2]: *** [ja.gmo] Error 1 make[2]: Leaving directory `/home/jerry/myfiles/audiodrivers/alsa-utils-1.0.8/alsaconf/po' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/jerry/myfiles/audiodrivers/alsa-utils-1.0.8/alsaconf' make: *** [all-recursive] Error 1 ---------------- What am I doing wrong? Many thanks, kepa java script:emoticon('')

Hi, I recently purchased a new desktop with an Intel motherboard D915 GUX with an integrated soundcard. According to intel.com it should have a Realtek ALC860 Audio coded and the drivers that came with the motherboard correspond to Realtek. W2K works fine after installing SP4 (could not do it before) I am trying to install Mandrake 10.1 as my main OS. Mandrake found all the hardware ok (will not try with my HP 3750 scanner, though), but the audio souncard is not there. Hardrake says: I/O Controller Hub Audio unknown, althout it states it is an Intel 9832 on PCI. ALSA does nof find the soundcard either. Dowloaded the Linux drivers from both websites (Intel & Realtek). I first tried with Intel : AUD_LINUX_1.5_BETA.sh* After running the file, I get: ---------------------------------------- │ Compiling the AZX-DRIVER for ALC880 Codec, this operation may take a │ │ while depending on your system configuration. Installing driver.. Make failed!, module not found! --------------------------------- So, this is a dead end for me (newbie to Linux) After this first trial, I try to do it with the Realtek drivers: alsa-driver-1.0.4/ After ./configure, I get: -------------------- checking cross compile... checking for directory with kernel source... /usr/src/linux checking for kernel version... The file /usr/src/linux/include/linux/version.h does not exist. Please, install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /usr/src/linux). [root@localhost alsa-driver-1.0.4]# ---------------------------- I can see that the version.h file is not installed where it is supposed to, so I run (as requested): [root@localhost alsa-driver-1.0.4]# ./configure --with-kernel=/usr/ ... and everything seems to run ok. However, after make... --------------- make -C /usr/ SUBDIRS=/home/jerry/myfiles/audiodrivers/alsa-driver-1.0.4/kbuild modules make[1]: Entering directory `/usr' make[1]: *** No rule to make target `modules'. Stop. make[1]: Leaving directory `/usr' make: *** [compile] Error 2 [root@localhost alsa-driver-1.0.4]# ----------------- ... which is a dead end for me. I have tried to make an ln -s between the supposed folders, but withouth any succes. Made about 10 wrong links and 20 attemps, all with the same result. I have gone to bed around 2.00 AM four days in a row truing to figure it out, so finally I come here to see if anybody can help me. I promised I have read all posts that say something about the ALC860 drivers and the like. Many thanks in advance. Have fun, kepa