AbaddonXD

[abaddon@localhost abaddon]$ uname -r 2.6.3-7mdk-p3-smp-64GB

im so lost.. ijust want the god damn thing working!

[the_despoiler@localhost the_despoiler]$ cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes MII_NOT_SUPPORTED=yes WIRELESS_ENC_KEY="" NEEDHOSTNAME=yes [the_despoiler@localhost the_despoiler]$ cat ls -1 cat: invalid option -- 1 Try `cat --help' for more information. [the_despoiler@localhost the_despoiler]$ cat ls- 1 cat: ls-: No such file or directory cat: 1: No such file or directory [the_despoiler@localhost the_despoiler]$

[the_despoiler@localhost the_despoiler]$ cd /etc/sysconfig/network-scripts/ls-1 bash: cd: /etc/sysconfig/network-scripts/ls-1: No such file or directory [the_despoiler@localhost the_despoiler]$ cd /etc/sysconfig/network-scripts ls-1 [the_despoiler@localhost network-scripts]$ cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes MII_NOT_SUPPORTED=yes WIRELESS_ENC_KEY="" NEEDHOSTNAME=yes [the_despoiler@localhost network-scripts]$ cat ls-1 cat: ls-1: No such file or directory [the_despoiler@localhost network-scripts]$

[the_despoiler@localhost the_despoiler]$ cat ifcfg-eth0 cat: ifcfg-eth0: No such file or directory [the_despoiler@localhost the_despoiler]$ cd/etc/sysconfig/network-scripts/ls-1 bash: cd/etc/sysconfig/network-scripts/ls-1: No such file or directory [the_despoiler@localhost the_despoiler]$ cd/etc/sysconfig/network-scripts ls-1 bash: cd/etc/sysconfig/network-scripts: No such file or directory [the_despoiler@localhost the_despoiler]$

[the_despoiler@localhost the_despoiler]$ /etc/sysconfig/networking-scripts/ifcfg-eth0 bash: /etc/sysconfig/networking-scripts/ifcfg-eth0: No such file or directory [the_despoiler@localhost the_despoiler]$ su Password: [root@localhost the_despoiler]# /etc/sysconfig/networkings-scripts/ifcfg-etho0 bash: /etc/sysconfig/networkings-scripts/ifcfg-etho0: No such file or directory [root@localhost the_despoiler]#

how do i get that do i just type ifcfg eth0 in konsole

[root@localhost the_despoiler]# ifconfig eth0 Link encap:Ethernet HWaddr 00:60:6E:70:0D:0A inet6 addr: fe80::260:6eff:fe70:d0a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21264 errors:0 dropped:0 overruns:0 frame:0 TX packets:44 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1277117 (1.2 Mb) TX bytes:11052 (10.7 Kb) Interrupt:22 Base address:0xa800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:490 errors:0 dropped:0 overruns:0 frame:0 TX packets:490 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:37092 (36.2 Kb) TX bytes:37092 (36.2 Kb) [root@localhost the_despoiler]# ifconfig dhcpcd eth0 eth0: Host name lookup failure ifconfig: `--help' gives usage information. [root@localhost the_despoiler]# maybe this will help a little bit?

well i was wrong from befor they were already mounted so i didnt have to mount them myself but they are NTFS an i can only read off them i cant copy onto them :| good mornin to you too =/ ive also been in the chat if you wanna make your way in there... maybe this would go faster then...... :)

how do i do this, i have lots of linux problems and if im able to copy screens shots an tests files of probelms over to windows i could get alot more help.. but i can only take off my windows paritions not put stuff on

ifconfig > /mnt/win_c/Documents\ and\ Settings/All\ Users/Desktop/ifconfig.txt it said no such directory..... and i can play music off my windows paritions but when itry to copy a text over from a gui it sais it cant read it or copy it or somthing.. im new to all this command stuff i also chose lan same thing

its not mounted

this is what i did i removed my defualt eth0 an re did it an i did it in this step i chose cable, net device i didnt chose manual i chose my nic card, automatic ip bootp/dhcp left assignhost name blank an zeroconf blank had netplug checked an there was no ip an no mask but ill do what u just sad an get back, ani still dont get on how to get a text file going....... i need smalll steps.. today is my 2nd day with linux so i know nothng

255.255.252.0 is what it says in windows well im not gonna worry about a firewall an router untill the internet works on linux

jeeeeez im alone again =(

oh haha... i have cable internet my provider is "shaw" and i have a router but its not plugged in , and the linux firewall is off, i have linux an windows installed on my machine, an when im in windows it works but not linux....... and i got ifup etho0, /sbin/ifup: line 427: 3670 Hangup /etc/init.d reload > /dev/null 27>&1

ABIT IC7 BIOS 26 P4 2.8C 512X2 Dual Channel Samsung PC3200 Seagate 120 SATA Seagate 200 SATA LiteON 52XCDRW SoundBlaster Audigy Gamer ATI Sapphire 9600 Pro DAVICOM 9102-Based Fast Ethernet Adapter ^ Is my hardware well ill go to ifconfig eth0.. itll take m awhile cuz i gotta write it down manualy on paper thenw ill write it back on here....

Ok, Bringing Up Interface eth0 [Failed] (On Linux boot check) I cannot ping myself, and i chose cable, dhcp and auto get ip an all that stuff... still nothing works?

jeezim to dumb to do all that isnt there an easy way...... an the guy said he hasnt even tested it yet

lol if im able to post in here on linux i wouldnt be askin for help =D but for ifup eth0 i got /sbin/ifup: line 427: 3105 Hangup /etc/init.d/tmdns reload 7/dev/null 2711 i wrote it down an i think i wrote it down correctly i didnt right down ifconfig etho0 cuz it was WAY to much to write out then have to type in here :) note: im using windows right now cuz it has the net going.. but linux doesnt =/

im a noob i dont know know how to show anything... an besides the net isnt workin...... but ill try wha tyou said an get back

i did all that........

i install mandrake 10 with all options, and i cant get the internet going....... i have cable... an when it does the startup check it says eth0 failed... or whatever its called..