neomorph

Nominated Screenshot

Here is my current Mandrake 10.0 desktop

I already downloaded this...didnt boot up when i booted directly from the cd... But I was able to run it in VIrtual PC...the look was good....tis good for a demo...its only 210 MB>...

Thanks anyways :D

My iso image is 700 MB and i have 512 MB DDR RAM on my computer with more than 50GB space available on my hdd..

No I dont think u got me right...I was successful in creating the iso file but after i burnt it onto a cd and booted up i get this error message

"cp: write error: No space left on device"

I finally created an iso image...but i get a write error saying not enough space to write...i made the iso file with the command "mklivecd mandrake.iso" without specifying any other options....if i specify those options mentioned in the FAQ section....will it work?

Even without mentioning cloop...it doesnt work..

I tried to create a Mandrake liveCD after reading abt it on the FAQ section...When I finally get down to giving the mklivecd command after installing everything mentioned in that post I get an error saying "module cloop.o not found"

I use Mandrake 10.0 CE on the 2.6.3-4mdk kernel...can someone tell me how to fix this problem??

Nominated Screenshot

If the above link doesn't work

Click here

I hope this is ok tyme :D

inline skater....i don't think a lot of ppl will visit this thread since the problem has been solved....

urpmi gcc-c++

<{POST_SNAPBACK}>

Everything's working fine after urpmi gcc-c++....Thanx everyone

I'll take that the problem is solved and mark the thread solved - Artificial Intelligence

here's the output of rpm -qa | grep gcc

[root@localhost rajiv]# rpm -qa | grep gcc
libgcc1-3.3.2-7mdk
gcc-cpp-3.3.2-7mdk
gcc2.96-cpp-2.96-0.83mdk
gcc-3.3.2-7mdk

When I try to install a newer version of a package i get a message saying "everything already installed" ...so if i remove the older versions using the package manager and then try to install the packages again...will it work??

Even after successfully updating using urpmi i got the same error /lib/cpp fails sanity check message....

Thanx spinynorman for moving the topic to where it belongs...

and devries....i tried to do what u said and it just says that everything is already installed. I tried the following

[root@localhost Documents]# urpmi gcc-cpp
Everything already installed
[root@localhost Documents]# urpmi gcc
Everything already installed
[root@localhost Documents]# urpmi gcc2.96-cpp
Everything already installed
[root@localhost Documents]# urpmi libgcc1
Everything already installed

Any more suggestions...

I have Mandrake 10.0 CE and whenever I try to install from the source .gz file i get and error when configuring using the ./configure command ... I get the following message

[root@localhost kleardock-0.5]# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... no
checking for c++... no
checking for gpp... no
checking for aCC... no
checking for CC... no
checking for cxx... no
checking for cc++... no
checking for cl... no
checking for FCC... no
checking for KCC... no
checking for RCC... no
checking for xlC_r... no
checking for xlC... no
checking whether we are using the GNU C++ compiler... no
checking whether g++ accepts -g... no
checking dependency style of g++... none
checking whether g++ supports -Wmissing-format-attribute... no
checking whether g++ supports -Wundef... no
checking whether g++ supports -Wno-long-long... no
checking whether g++ supports -Wnon-virtual-dtor... no
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check

What is sanity check?? I am confused...i tried to install the latest version of gcc preprocessor and i got an error saying version conflict...Can someone point out ways to rectify this??

i thought i put this in the software section...would the mods be kind enough to move this topic to its proper section plz..

I found libplds4.so in mozilla package and in gaim1.0.1.tar.gz file too that i downloaded...Can I jus copy those files and paste it in the /lib directory? Also what does libplds4.so not satisfied mean?

I downloaded Gaim 1.0.1 (rpm) and tried installing it...It returned an error saying libplds4.so not satisfied...Where can I find this file? Is it available on Mandrake install cd...I have cd1 and cd3 and my cd2 is corrupted. or should i dl from some website? can some1 put up a link where i can dl libplds4.so?

Thanks a lot arctic... Changing onboot=no to onboot=yes solved the problem...This is why Linux rules...

Here is the content of /etc/sysconfig/network-scripts/ifcfg-eth0

I am not sure what the NETWORK refers to....does it mean the DNS?

Cos my DNS is not listed in the file nor is my gateway.

[root@localhost network-scripts]# cat ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

IPADDR=10.11.48.134

NETMASK=255.255.255.0

NETWORK=10.11.48.0

BROADCAST=10.11.48.255

ONBOOT=no

MII_NOT_SUPPORTED=yes

I did what u said arctic...but this is what i got...i get a 100% data loss when i am receiving data

also the ifcfg-eth0 file had static option only

[root@localhost root]# ifup eth0

[root@localhost root]# ifconfig eth0

eth0 Link encap:Ethernet HWaddr 00:11:2F:1F:44:E9

inet addr:10.11.48.134 Bcast:10.11.48.255 Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:17 errors:0 dropped:0 overruns:0 frame:0

TX packets:4 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:1020 (1020.0 B) TX bytes:168 (168.0 B)

Interrupt:23 Base address:0xe800

[root@localhost root]# ping 216.239.59.99

PING 216.239.59.99 (216.239.59.99) 56(84) bytes of data.

^[

--- 216.239.59.99 ping statistics ---

11 packets transmitted, 0 received, 100% packet loss, time 9998ms

[root@localhost root]# ping 216.239.59.99

PING 216.239.59.99 (216.239.59.99) 56(84) bytes of data.

--- 216.239.59.99 ping statistics ---

6 packets transmitted, 0 received, 100% packet loss, time 4998ms

[root@localhost root]# ping 216.239.59.99

PING 216.239.59.99 (216.239.59.99) 56(84) bytes of data.

--- 216.239.59.99 ping statistics ---

2 packets transmitted, 0 received, 100% packet loss, time 999ms

Its a normal broadband connection..no modem...directly connected to my ethernet card

I have this broadband internet connection that works in such a way that there is a direct connection to my ethernet card...I gave the ip address and DNS and gateway and subnet mask...but i cant get on to the internet when i use the broadband client given by my ISP...the same connection works very well in my Knoppix v3.6...Is there a separate n/w card config tool in mandrake like in linux? cos i cant figure out if mine is a dsl, or lan connection...or any other terminology..