Perdido

I have tried to subscribe to Cooker mailng list several times but I haven't been able to do it. I follow what is said in http://www.mandrakelinux.com/en/fdevlists.php3 and I receive an email with three ways to subscribe: Someone (hopefully you) asked for your e-mail address to be added to list 'cooker'. If you want this action to be taken, please - reply to this mail OR - send a message to sympa@linux-mandrake.com with subject auth XXXXXXXX sub cooker XXXX@XXXX.com OR - hit the following mailto mailto:sympa@linux-mandrake.com?subject=auth%XXXXXXXXXX%20sub%20cooker%20XXXX@XXXX.com If you do not want this action to be taken, you can safely ignore this message. I have tried the three ways but I don't receive any email from the list. Any idea?. Thank you.

Could someone tell me the differences among all the Mandrake precompiled kernels?. Or, if it exists, any link to that information. Thank you.

I have tried with the second CD with the same result.

Hello all, I have a problem trying to install Mandrake 9.2 in my Clevo D400E laptop (I have the same problem with other distros): I boot with the CD 1 (it has been tested in other computer and it works) and it freezes after booting the kernel (the screen goes black and there is no activity). I have to reboot. If I try to load it with a text-only option I can see these messages: Loading root.bin... Loading linux.bin... ready. Uncompressing Linux... Ok, booting the kernel. Then it freeze... Any idea?. Someone here with the same laptop (it is reselled with a lot of diferent names all the world arround) and Mandrake 9.2?.

Do you know if there are KDE 3.1.1 rpms for Mandrake anywhere?. I haven't found them.

All the controls in KMix are set to the max. It seems a problem with the drivers in the kernel but I don't know how to fix it.

I have installed kernel 2.4.21-0.13mdk. Since then, when I log in KDE my sound is very low. Here is what I have in my /var/log/messages file: Mar 28 16:44:24 portatil sound: Loading sound module (snd-maestro3) succeeded Mar 28 16:44:24 portatil kernel: maestro3: version 1.23 built at 15:30:15 Mar 14 2003 Mar 28 16:44:24 portatil modprobe: /lib/modules/2.4.21-0.13mdk/kernel/drivers/sound/maestro3.o.gz: Mar 28 16:44:24 portatil modprobe: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. Mar 28 16:44:24 portatil modprobe: You may find more information in syslog or the output from dmesg Mar 28 16:44:24 portatil modprobe: init_module: No such device Mar 28 16:44:24 portatil modprobe: modprobe: insmod /lib/modules/2.4.21-0.13mdk/kernel/drivers/sound/maestro3.o.gz failed Mar 28 16:44:24 portatil modprobe: modprobe: insmod maestro3 failed Mar 28 16:44:25 portatil aumix: vol set to 58, 58, R Mar 28 16:44:25 portatil aumix: pcm set to 71, 71 Mar 28 16:44:25 portatil aumix: speaker set to 100, 100 Mar 28 16:44:25 portatil aumix: line set to 100, 100, P Mar 28 16:44:25 portatil aumix: mic set to 100, 100, P Mar 28 16:44:25 portatil aumix: cd set to 100, 100, P Mar 28 16:44:25 portatil aumix: igain set to 100, 100 Mar 28 16:44:25 portatil aumix: line1 set to 100, 100, P Mar 28 16:44:25 portatil aumix: phin set to 100, 100, P Mar 28 16:44:25 portatil aumix: video set to 100, 100, P Mar 28 16:44:25 portatil sound: Loading mixer settings succeeded Could you help me?. Thank you in advance.

It seems to me that, from some days ago on, Cooker has not new packages. Is that true?. Can it something to do with new Mandrake 9.1?. If so, when is planned to start again with new packages in Cooker?. I woluld like to see packages like KDE 3.1.1 or OpenOffice 1.1 beta in Cooker.

It works now. Thank you

I am using nsplugins but I don't know how to set the mimetypes. Any help?

Hello, I have Adobe Acrobat Reader installed and it is my default application for pdf files in Konqueror but when I click a pdf file I get a Acrobat window to open the file and I would like to watch it in the Konqueror window. Is it possible?. I think so because I think I have it this way some time ago but I don't know how. Thank you in advance.

OK, I have commented it out. If I have the problem again, I will say it to you. Thak you.

If I don't reinstall 4.2 the XFree don't work. Here it is: # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config man page for details about the format of # this file. # ********************************************************************** Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "es" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" Option "Emulate3Buttons" Option "Emulate3Timeout" "50" EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1024x768" HorizSync 31.5-48.5 VertRefresh 40-70 # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection Section "Device" Identifier "device1" VendorName "S3 Inc." BoardName "S3 Savage (generic, sw_cursor)" Driver "savage" VideoRam 8192 Option "DPMS" #Option "xaa_benchmark" Option "sw_cursor" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" EndSection Which line? Thank you all.

I have my system upgraded from Cooker. So, I have XFree86 4.3 but, now and then (once a day more or less) my screen freeze and the only way I have probe to solve it is the following one: 1- Restart the system 2- Reinstall XFree 4.2 3- Restart the system 4- Reinstall XFree 4.3 5- Restart the system It has to be a better way to solve it. Can you help me?. Thank you in advance.

My problem is with eth1 (wireless interfaz) because eth0 (ethernet interfaz) is not said to be active at boot. What I have seen in the /var/log/messages and /var/log/syslog/ is a lot of messages like these ones: Feb 16 19:30:44 portatil modprobe: modprobe: Can't locate module snd-card-1 Feb 16 19:30:44 portatil modprobe: modprobe: Can't locate module snd-card-2 Feb 16 19:30:44 portatil modprobe: modprobe: Can't locate module snd-card-3 Feb 16 19:30:45 portatil modprobe: modprobe: Can't locate module snd-card-4 Feb 16 19:30:45 portatil modprobe: modprobe: Can't locate module snd-card-5 Feb 16 19:30:45 portatil modprobe: modprobe: Can't locate module snd-card-6 Feb 16 19:30:45 portatil modprobe: modprobe: Can't locate module snd-card-7 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module eth2 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module eth3 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module tr0 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module tr1 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module tr2 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module tr3 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module fddi0 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module fddi1 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module fddi2 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module fddi3 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module eth2 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module eth3 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module tr0 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module tr1 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module tr2 Feb 21 14:32:53 portatil modprobe: modprobe: Can't locate module tr3 Feb 21 14:32:54 portatil modprobe: modprobe: Can't locate module fddi0 Feb 21 14:32:54 portatil modprobe: modprobe: Can't locate module fddi1 Feb 21 14:32:54 portatil modprobe: modprobe: Can't locate module fddi2 Feb 21 14:32:54 portatil modprobe: modprobe: Can't locate module fddi3 Could it be the cause of the problem (I don't know anything about it)?