isamu

Tweaking the ram and the graphic card [be changing the card physically or trying another drivers] could be the way. I recently have a issue with a graphic card that slow the entire desktop [s3 Graphics UniChrome IGP over an Phenom X3 with 4 Gb of ram] and due a poor driver implementation it run like a celeron @ 300 Mhz bro!!! Good look

by default kde4 drags a lot of resources, so why dont try using another window manager? e: gnome, xfce or windowmaker?

Yo, first Merry Christmas!!!!! :thumbs: 2nd. While trying to relax a bit in my room , I intended to hear a bit of music lost in my ext3 partition, go to xterm and then $xmms Gtk-WARNING **: Failed to load module "libcanberra-gtk-module.so": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory ** CRITICAL **: setup_ctrlsocket(): Failed to unlink /home/skull0/tmp/xmms_skull0.0 (Error: Stale NFS file handle) ** CRITICAL **: setup_ctrlsocket(): Failed to assign /home/skull0/tmp/xmms_skull0.0 to a socket (Error: Stale NFS file handle) the gtk warning is safe to skip [i think so], but the setup_ctrlsocket function failed to unlink and assign the sock to xmms , I tryed to umount /remount all fs, despite the fact I have only the nfs client not the server , I cant delete the file staled [even when booting a diferent os. v.gr: puppy and solaris]. Any help and comments apreciated and will be rewarded with a nice Santa Claus visit!!!! =p Thanks :lol2:

dear scarecrow are you making reference to gnome 2.2.4 or 2.24? the issue related here its to the last one =)

thanks arctic, no the 3d is not enabled [in fact I dunno how to do that?=)] I get curious bcause when the fail suceeds my mouse section in gnome System > mouse dont work, so I trace back the link and I found the gsynaptics pack is NOT installed by default so hopefully instaleed the pack and happy end bro. Thanks. So at the end if you are using gnome 2.24 with a synpatics touchapd you must install the gsynpatics add in order to make your cursor again. Thanks to all who read this

YO there Im looking and even when its not a kernel panic Im kinda curious about it , I just upgraded to mdv 2009 x86_64 frsh install and after a couple of time using gnome 2.24 my mouse pointer freezes his position and dont move anymore [but still make click and select] here my xorg.conf file # File generated by XFdrake (rev 247269) # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerLayout" Identifier "layout1" Screen 0 "aticonfig-Screen[0]-0" 0 0 InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" InputDevice "SynapticsMouse1" "SendCoreEvents" EndSection Section "Files" EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer Load "dri" # direct rendering EndSection Section "ServerFlags" #DontZap # disable <Ctrl><Alt><BS> (server abort) #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching) # allows the server to start up even if the mouse does not work Option "allowmouseopenfail" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us(alt-intl)" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" EndSection Section "InputDevice" Identifier "SynapticsMouse1" Driver "synaptics" Option "SHMConfig" "on" EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1280x800" HorizSync 31.5 - 90.0 VertRefresh 60.0 - 60.0 EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "device1" Driver "ati" VendorName "ATI Technologies Inc" BoardName "ATI Radeon 9250 and earlier" Option "DPMS" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:5:0" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I ve seen no problem here [besides the syanptycs mouse] What shoould I modify to make this mouse works in gnome [this was fine in 2.20/2.22 perhaps incopatibiity?] Thanks :huh:

Whoah!!! thanks ianw1974 and needie thats support and thanks for check this, explicit im a fan of downloading from certains servers where i must provide an user pass but my combo its right and in fact to avoid misspeled links I use a generated list [exported as csv but then edited for me with gedit to plain text, so csv its only that three letters]. The wget1.9 i got from the gnu ftp [i did it half sleep and didnt notice it were newer releases =3] im gonna try downloading wirh urpmi to see what happens. Thanks brothers.

Yo there people how are ya doing, Im writing this ; I just upgraded [fresh install] to mdv 2009.0 64 and try to use wget with the next syntax wget --http-user=me --http-password=whoknows -i /there/was/my/download/file.csv and then what , the wget refuses to download with the right user/psw string , verify the existence of the files, check 1000s times the spelling of it, and the right syntax [of course man wget], so I down the wget 1.9 and try this and went well, [the only hack its the passwd instead of password in syntax =p) but then what I would prefer to use a wget a little more updated , dont know if this is a bug, or whatever,, so anyonw knows the version of wget used in 2008.1? and by the way the version used in 2009.0? I just delete with rpm -e wget and forgot to check the version. :wall: Thanks in advance :thumbs:

Thanks scarecrow I been told that coreavc but I do not like to use comercial stuff in my precious linux. But at all I do not know the vlc . Im trying it know. Thanks ευχαÏιστίες I like your xfce logo. Greetings

Yo people, greetings to all, Im looking for play correctly video files riped from blueray [(BD H264 1920x1080 24fps)] I have used mplayer VIDEO: [avc1] 1920x1080 24bpp 23.976 fps 0.0 kbps ( 0.0 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [liba52] AC3 decoding with liba52 Using SSE optimized IMDCT transform Using MMX optimized resampler AUDIO: 48000 Hz, 2 ch, s16le, 640.0 kbit/41.67% (ratio: 80000->192000) Selected audio codec: [a52] afm: liba52 (AC3-liba52) ========================================================================== AO: [oss] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... [h264 @ 0x88a5cf0]brainfart cropping not supported, this could look slightly wrong ... [h264 @ 0x88a5cf0]brainfart cropping not supported, this could look slightly wrong ... VDec: vo config request - 1920 x 1080 (preferred colorspace: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [x11] 1920x1080 => 1920x1080 Planar YV12 [fs] [zoom] [ASPECT] Warning: No suitable new res found! [swscaler @ 0x888beb8]using unscaled yuv420p -> rgb32 special converter [h264 @ 0x88a5cf0]Cannot parallelize deblocking type 1, decoding such frames in sequential order pts value <= previous pts value <= previous: -0.001 ct: -0.000 0/ 0 ??% ??% ??,?% 1 0 99% pts value <= previous: -0.001 ct: -0.000 0/ 0 ??% ??% ??,?% 2 0 99% and so on... my vid doesnt look good its like slowly paused as well the sound, I have played avi file at high res [at least 1600:1024] and went well. Any sugestions.? Thanks in advance :D :D :D

Yo there, <Im just finishing installing mdv 2008 official for x86_64, everything seems to be fine, but I have a trouble with wireless devices, in mdv 2007.1 i was using an atheros 5005g chipset to work out but due circumstances I had to add an wireless usb adapter from billionton , it seems to be using a ralink 802.11bg (it says so) and there was no problem, but when using 2008 the atheros its fine but has no enough signal to work out, then when plug the usb or when acces the connection panel having the usb pluged since the beginning the system first slow down (like slow motion) and then freezes completely. dmesg dont show nothing , in using an acer aspire 5050. thanks in advance

Hello there folks, I have a issue with my laptop an L35 from Toshiba, first it comes with the xp and set up mdv 2007 and work for a while so, but I try to install 98 in this (I blew up the ntfs partition, and Ill adore it jeje), the installation of this dont work, so I scrash the bootloader and the launch the rescue mode and give it to rewrite the lilo sequence, but here fails and tell me abut the size of the kernel its too big(?) dunno why because i dont touch any of the ext3 fs, then going to reinstall the whole mdv but when trying the partitions fail in the chipset recognition (I know it uses the sata sil driver) and mdv cant see a disk and says it fails in /usr/share/blabla.py or whatever on the line XXXX. Lucky I have another empty partition and try with fedora 4 and it went well with the same sata sil driver so any sugestion about how to reinstall mdv on the system? Thanks Alex

I chek it a couple days ago, I think its very pragmatic, and in fact I like to see the gate without all the byte wasting add.. This is smarter, faster and nice. (for the ones using yahoo, and when have to check several times the mail in this one jeje)

I dont find anything like this but by the way someone know where to get info manuals or something to strip out this laptops>? Thanks for the info aRTee,scarecrow and ianw1974, PD. Do you suggest me to rebuild again the kernel, and if so, is there any tips you can tell me/ Thanks a lot May the massXaceleration be with you!!!

Thanks for reply, I have months working on it, I got all the drivers for this toast and it dowsnt work, this is a realtek hda audio something, but its suposed to work with Thanks aRTee

Hi there, a while ago I buy a toshiba lap but unfortunatley the sound doesnt work, so if someone is kind and can say about a pcmcia sounc card which its know to work under linux. Thanks in advance [moved from Hardware by spinynorman]

Hi there im in s midlle of a strange problem, I have conf the load to autoload a windowmanager (from the installation) but after time the gdm refuses to load it and send me back to the log on screen and it dont load nothing of the managers installed I can start at least one of them trough this way, I launch a normal users failsafe and issue a direct call to the x11 serve indicates the manager to load. Hopefully this works but indeed, how can fix the refusing dm/gdm to load right the system, I mean, not only to autoenter n session, as well to load the wm? (isnt for that dm/gdm was done_?) Thanks to all Alex

Hi ti everyone! Here are the results The way its to force to fsck.ext3 to check the whole drive, since the superblock, the journal id, the ext3 flags and other stuff were corrupted (I dunno why)=() I have to play with numbers trying with each and everyone number to guess the superblock even when I know the system was baes on 4k blocks it take a little time, but I found the right superblock et voila, after 4 checks of fsck the errors were corrected and finish it. I can use the disk again and my files have 100% of integrity. My bad I dont think to dump the superblocks founded right. Ill try to post it later. Thanks to everyone for their help. Im at your orders.

I dont know but try instead use the x264 from videolan use the x264 wich comes with the standar codecs package if this dont work try cheking the options of the configure script; it should be a part where you can manually do reference to the x264 lib then enter the location of your libraries. If ya dont know where is this, use locate x264 and put the locations showed there. Thanks to you <alex

Try using the svn version or the tarball from mplayer homepage, get the full codecs package , I set up this way on a 2006 and work fine.

Even when here appear a driver degined for redhat , there was a reason, mandriva 2006 and 2007 has a severe incompatibility with this hardware specific (all the hda-intel soundcores laptop based) and this was the driver with seemed to work, but seemed only because there is no sound with this and with the mdv driver and general driver for this hardware, so I suggest the chance this could be bugging me , bevcause I know my system uses the same pci bus for the sound a software modem and the pci implementation and until I see the usb subsystem its based on to the pci bus... .... :huh: messy right? I dont think this usb bug be due the fact I use a no working driver deigned for another distro,,,and it the end it was configurated to be adapted to this parameters...but anyway Im open to suggestions and thank for take your time to look around this jerk bug. ;) Thanks <alex PD... I almost dont use rpm I prefer to use source packages, and in fact this one was a tarball,. Thanks

hi friends, here are the logs when trying to use an usb disk of 30 gb and even cant mount it!!! tail -f /var/log/messages Nov 17 12:59:53 localhost diskdrake[6508]: created directory /proc (and parents if necessary) Nov 17 12:59:53 localhost diskdrake[6508]: created directory /proc (and parents if necessary) Nov 17 12:59:57 localhost diskdrake[6508]: default cancel_clicked Nov 17 13:00:37 localhost diskdrake[6508]: created directory /mnt/win_c (and parents if necessary) Nov 17 13:00:37 localhost diskdrake[6508]: created directory / (and parents if necessary) Nov 17 13:00:37 localhost diskdrake[6508]: created directory /mnt/win_d (and parents if necessary) Nov 17 13:00:37 localhost diskdrake[6508]: created directory /mnt/cdrom (and parents if necessary) Nov 17 13:00:37 localhost diskdrake[6508]: created directory /proc (and parents if necessary) Nov 17 13:00:37 localhost diskdrake[6508]: created directory /proc (and parents if necessary) Nov 17 13:00:37 localhost diskdrake[6508]: ### Program is exiting ### and when cheking dmesg ALSA /home/skull0/Desktop/realtek-linux-audiopack-RHEL4U4-4.05b/alsa-driver-1.0.12-RHEL4U4-4.05b/pci/hda/hda_codec.c:213: hda_codec: invalid dep_range_val 0:7fff ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 20 eth0: RealTek RTL8139 at 0xcea2e000, 00:16:36:61:03:f0, IRQ 20 eth0: Identified 8139 chip type 'RTL-8100B/8139D' eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver ip_tables: © 2000-2006 Netfilter Core Team Installing knfsd (copyright © 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (1781 buckets, 14248 max) - 224 bytes per conntrack ClusterIP Version 0.8 loaded successfully ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ netfilter PSD loaded - © astaro AG IFWLOG: register target usb 3-3: new high speed USB device using ehci_hcd and address 2 usb 3-3: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning Vendor: HTS42403 Model: 0M9AT00 Rev: MAAO Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 58605120 512-byte hdwr sectors (30006 MB) sdb: Write Protect is off sdb: Mode Sense: 00 14 00 00 sdb: assuming drive cache: write through SCSI device sdb: 58605120 512-byte hdwr sectors (30006 MB) sdb: Write Protect is off sdb: Mode Sense: 00 14 00 00 sdb: assuming drive cache: write through sdb: sdb1 sdb2 sd 2:0:0:0: Attached scsi disk sdb usb-storage: device scan complete sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: Attached scsi generic sg1 type 0 usb 3-3: reset high speed USB device using ehci_hcd and address 2 usb 3-3: device not accepting address 2, error -110 usb 3-3: reset high speed USB device using ehci_hcd and address 2 usb 3-3: device not accepting address 2, error -110 usb 3-3: reset high speed USB device using ehci_hcd and address 2 usb 3-3: device not accepting address 2, error -110 usb 3-3: reset high speed USB device using ehci_hcd and address 2 usb 3-3: device not accepting address 2, error -110 usb 3-3: USB disconnect, address 2 2:0:0:0: scsi: Device offlined - not ready after error recovery 2:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sdb, sector 24 Buffer I/O error on device sdb, logical block 3 2:0:0:0: rejecting I/O to dead device Buffer I/O error on device sdb, logical block 3 usb 3-3: new high speed USB device using ehci_hcd and address 3 usb 3-3: device not accepting address 3, error -110 usb 3-3: new high speed USB device using ehci_hcd and address 4 usb 3-3: device not accepting address 4, error -110 usb 3-3: new high speed USB device using ehci_hcd and address 5 usb 3-3: device not accepting address 5, error -110 usb 3-3: new high speed USB device using ehci_hcd and address 6 usb 3-3: device not accepting address 6, error -110 floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found usb 3-3: new high speed USB device using ehci_hcd and address 7 usb 3-3: device not accepting address 7, error -110 usb 3-3: new high speed USB device using ehci_hcd and address 8 usb 3-3: device not accepting address 8, error -110 usb 3-3: new high speed USB device using ehci_hcd and address 9 usb 3-3: device not accepting address 9, error -110 usb 3-3: new high speed USB device using ehci_hcd and address 10 usb 3-3: device not accepting address 10, error -110 floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found usb 3-1: new high speed USB device using ehci_hcd and address 11 usb 3-1: device not accepting address 11, error -110 usb 3-1: new high speed USB device using ehci_hcd and address 12 usb 3-1: device not accepting address 12, error -110 usb 3-1: new high speed USB device using ehci_hcd and address 13 usb 3-1: device not accepting address 13, error -110 usb 3-1: new high speed USB device using ehci_hcd and address 14 usb 3-1: device not accepting address 14, error -110 floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found floppy0: no floppy controllers found dunno if was the entire file because at the beginnig I saw much lines of ALSA because I conflicts with the soundcard (would be this is related? its an al861 of realtek using the hdaintel core of alsa but dont works, ask this because I think its using the same bus as the usb line think!!!) Thanks anyway for your valuable time

Thnkas for the tip, I lm cheking now this By the way, its very nice the avatar you use, (the monkey), I like it. Thanks a lot

Hi there again, I have a serious issue with the 2007 mdv , The usb driver used by these isnt working, it has the next specs Each and every usb device attached to the system goes down in a certain time, a printer after 5 pages dies, the usb flash and hdd disks via an ide-usb connector dies after few megas of transfer , a scanner when reading half page freezes, it simply stop working, al of this has been poved on other linux distros as FC 4 mdv 2006 and even windows and its does works (the laptop system as well works fine in windows and works with each and every device too). lspci report this 00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81) 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80) 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] 09:01.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) 09:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C (rev 10) 09:04.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01) (the wifi link doesnt work too, but I dont use it) Some idea friends? Thanks lot again

I ve cheked my fstbab and the system does not mention the device (it was shows as /dev/hdd before, but now doesnt appear) and I would take the suggestion of recreate the partition but the problem its at full of documents and my entire life its there, because my degree thesis its there (jeje) and give me no time to make a backup on something. And the rescue mode of can acces this? Thanks Alex