Jump to content

mr_coffee

Members
  • Content Count

    16
  • Joined

  • Last visited

Everything posted by mr_coffee

  1. Hello everyone. After installing mandriva powerpack 2007 from 2006 everything seemed to work fine. Then I got onto a mandriva chat channel while using xchat and one of the guys told me I should update all my packages, so I went to easyurmpi website and I clicked all the boxes and pasted that into my console, well it seemed to uninstall my graphics card drivers that were working fine before from doing a upgrade using 2007 powerpack. I'm running a 6800 Gt nvidia geforce 256meg graphics card. The default files mandriva 2007 installs for the graphics card (generic graphics card drivers) work but the upgraded ones didn't it seems. Now when I start up linux it will boot everything up fine until its time to go to the login screen. From there the screen gets scrambled and i try alt + alt + blackspace but no fix. I then tried to log in with failsail isntead of a GUI, and when i typed in startx and it says IO excpetion (0.0) and talks about the nividia drivers, and some GLX I think it said. Any ideas how I can get this fixed? I am a total n00b with linux i just had alot of stuff on my linux harddrive, and i don't want to loose it all by doing a clean install. Thanks!
  2. Hello everyone. I'm sick of using windows again and I would like to get back to using Linux. But as soon as I moved into my new apartment i'm unable to connect to the internet. I am very noobish to Linux and now i'm rusty since I havn't had time to figure it out. I remember I had to screw around with my network config files awhile ago to get it working with my old ISP so that network file is probably filled with my old infomration thats why its not working I bet. I'm not connected to a LAN or anything, i'm directly connecting to the internet through a cable modem. What would I need to do to connect to the internet? What files do you need to see on my system to better help me? Thank you. PS: i'm running Mandriva power pack 2006
  3. thanks, thats what i shall do! Anyone konw if KDE 3.5 is stable yet? I was wanting to upgrade but i'm afraid it will f up my system
  4. Hello everyone. I want to use Kopete to talk on ICQ and AIM, gAim for some reason will only let me talk to people on AIM but not icq and Kopete has some cool features gAim doesn't. I'm current using version 0.10.3 on KDE 3.4.2. This came preinstalled on mandriva 2006 powerpack. Thanks! here is the error i keep getting: (no debugging symbols found) Using host libthread_db library "/lib/tls/libthread_db.so.1". (no debugging symbols found) `shared object read from target memory' has disappeared; keeping its symbols. (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread -1239099712 (LWP 11959) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [KCrash handler] #4 0xb5f28b72 in Client::qt_static_property () from /usr/lib/libkopete_oscar.so.2 #5 0xb5f3ff1c in Client::setStatus () from /usr/lib/libkopete_oscar.so.2 #6 0xb710325d in QObject::activate_signal () from /usr/lib/qt3/lib/libqt-mt.so.3 #7 0x08454301 in ?? () #8 0xb7549434 in ?? () from /usr/lib/qt3/lib/libqt-mt.so.3 #9 0xbf9782d8 in ?? () #10 0xb73cef4b in QGArray::deleteData () from /usr/lib/qt3/lib/libqt-mt.so.3 #11 0xb73cef36 in QGArray::deleteData () from /usr/lib/qt3/lib/libqt-mt.so.3 #12 0xb5f68c10 in ?? () from /usr/lib/libkopete_oscar.so.2 #13 0xffffffec in ?? () #14 0xbf9782cc in ?? () #15 0xbf9782d8 in ?? () #16 0xb5f305b2 in Client::gotSearchResults () from /usr/lib/libkopete_oscar.so.2
  5. Thanks for the help! I did what you said, when i went into System/Configuration/Packaging/MandrivaUpdates, i could choose, bug fixes, secuirty, and normal updates, i selected them both, then i selected all packages, and it said it was around 800 megs, should I download and install all the updates?
  6. THanks for the responce, but all it did was this: [root@mybox coffee]# urpmi.update -a-v unable to access hdlist file of "updates", medium ignored examining synthesis file [/var/lib/urpmi/synthesis.hdlist.The Ultimate Linu top DVD (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.The Ultimate Linu top DVD (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.The Ultimate Linu top DVD (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.The Ultimate Linu top DVD (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.The Ultimate Linu top DVD (cdrom5).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.The Ultimate Linu top DVD (cdrom6).cz] computing md5sum of existing source hdlist (or synthesis) examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] computing md5sum of existing source hdlist (or synthesis) examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.contrib.cz] computing md5sum of existing source hdlist (or synthesis) examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.jpackage.cz] computing md5sum of existing source hdlist (or synthesis) examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] computing md5sum of existing source hdlist (or synthesis) examining MD5SUM file examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] What does that mean exactly? i'm all up to date?
  7. Hello everyone! Well i went to use Easy_urmpi, I reinstalled mandriva so I had to run this again. ANyways, last time I did it, it took awhile. This time around I forgot it was even still downlaoding stuff and I reb00ted linux. So I went to go copy and paste the commands to update urmpi again and i get the following: [root@mybox coffee]# urpmi.addmedia main ftp://ftp.clinet.fi/pub/mirrors/Mandrake-linux/official/2006.0/i586/media/main with media_info/hdlist.cz unable to access hdlist file of "updates", medium ignored medium "main" already exists [root@mybox coffee]# urpmi.addmedia jpackage ftp://ftp.caliu.info/pub/distribucions/mandrake/official/2006.0/i586/media/jpackage with media_info/hdlist.cz unable to access hdlist file of "updates", medium ignored medium "jpackage" already exists [root@mybox coffee]# urpmi.addmedia plf-free ftp://ftp.planetmirror.com/pub/plf/mandrake/free/2006.0 with hdlist.cz unable to access hdlist file of "updates", medium ignored medium "plf-free" already exists [root@mybox coffee]# urpmi.addmedia plf-nonfree ftp://ftp.planetmirror.com/pub/plf/mandrake/non-free/2006.0 with hdlist.cz unable to access hdlist file of "updates", medium ignored medium "plf-nonfree" already exists [root@mybox coffee]# urpmi.addmedia --update updates ftp://ftp.caliu.info/pub/distribucions/mandrake/official/updates/2006.0/main_updates/ with media_info/hdlist.cz unable to access hdlist file of "updates", medium ignored medium "updates" already exists [root@mybox coffee]# [root@mybox coffee]# urpmi.addmedia main ftp://ftp.clinet.fi/pub/mirrors/Mandrake-linux/official/2006.0/i586/media/main with media_info/hdlist.cz unable to access hdlist file of "updates", medium ignored medium "main" already exists [root@mybox coffee]# urpmi.addmedia contrib ftp://ftp.caliu.info/pub/distribucions/mandrake/official/2006.0/i586/media/contrib with media_info/hdlist.cz unable to access hdlist file of "updates", medium ignored medium "contrib" already exists [root@mybox coffee]# urpmi.addmedia jpackage ftp://ftp.caliu.info/pub/distribucions/mandrake/official/2006.0/i586/media/jpackage with media_info/hdlist.cz unable to access hdlist file of "updates", medium ignored medium "jpackage" already exists [root@mybox coffee]# urpmi.addmedia plf-free ftp://ftp.planetmirror.com/pub/plf/mandrake/free/2006.0 with hdlist.cz unable to access hdlist file of "updates", medium ignored medium "plf-free" already exists [root@mybox coffee]# urpmi.addmedia plf-nonfree ftp://ftp.planetmirror.com/pub/plf/mandrake/non-free/2006.0 with hdlist.cz unable to access hdlist file of "updates", medium ignored medium "plf-nonfree" already exists [root@mybox coffee]# urpmi.addmedia --update updates ftp://ftp.caliu.info/pub/distribucions/mandrake/official/updates/2006.0/main_updates/ with media_info/hdlist.cz unable to access hdlist file of "updates", medium ignored medium "updates" already exists [root@mybox coffee]# Does this mean it updated everything? or is it saying this because it thinks it updated because I shut down. Thanks!
  8. hah yeah until they give me problems i'll just let them float around there for awhile. I actually found out waht they were I think, I use ipV6, not v4, so they arn't really eth devices, they are just tunneling adapters! I could be wrong but kind of makes sense. Thanks again!
  9. Hello everyone! I'm running mandriva 2006 power pack, I have a flat screen, MultiSync LCD 1770GX, 17" monitor. I set the resolution to 1280x1024, the icons, and toolbar look great, problem is, when I open up a webpage or kmix, the windows are huge, like kmixer won't even show on the screen only like 2/3 of it will show. Here is a screen shot of what i'm talking about also when I open up a webpage. Any ideas on how I can fix this? I also have a GeFOrce 6800 GT, right now i'm using the generic drivers supplied with mandriva which work great so far!
  10. Hey guys, thanks it finally worked after another reB00t! but it sounds like hell, can someone post a screenshot of what their kmix looks like? mine is all jacked up to the highest on everything that might be why but i don't see any presets to change it. Or does anyone kknow of a website that says what a good balance is? Thanks again guys!
  11. Hm.... I did what you said, and i got: [root@mybox coffee]# service alsa start ALSA driver (version 1.0.9b) is already running. [root@mybox coffee]# alsaconf ANd its saying alsaconf isn't a command any idea why? Now i'm getting the following, still no sound: [root@mybox coffee]# service alsa start ALSA driver (version 1.0.9b) is already running. [root@mybox coffee]# /sbin/chkconfig --list sound sound 0:off 1:off 2:on 3:on 4:on 5:on 6:off [root@mybox coffee]# /sbin/chkconfig --list alsa alsa 0:off 1:off 2:on 3:on 4:on 5:on 6:off [root@mybox coffee]#
  12. Hello everyone, i have a Soundblaster audigy, u can see what type in mysignature. I am running Mandriva 2006 and the sound isn't working at all, i had this problem before awhie ago when i tried to first install mandriva 2006 powerpack but i just reb00ted and it fixed the problem automatically. I did a clean install again to fix my internet connection, so sound again doesn't work. This time the reb00ting isn't fixing it! Under Sound Configuration it says: HEre u can select an alternative driver (either OSS or ALSA) for your sound card (Creative Labs|EMU10K2 Audigy Audio Process). Your card currently uses the ALSA "snd-emu10k1" driver (default driver for your sound card is "snd-emu10k1" It also shows a OSS driver called , Audigy, and another one called emu10k1, i tried both of them, both didn't work either! Linux reads it as: [root@mybox etc]# lspcidrake -v|fgrep AUDIO snd-emu10k1 : Creative Labs|EMU10K2 Audigy Audio Processor [MULTIMEDIA_AUDIO] (vendor:1102 device:0004 subv:1102 subd:2002) [root@mybox etc]# grep sound-slot /etc/modules.conf This is suppose to tell me if my sound is muted or not: [root@mybox etc]# aumix -q aumix: error opening mixer Here is supppose to show me if my services can be run on int3? [root@mybox etc]# /sbin/chkconfig --list sound sound 0:off 1:off 2:on 3:on 4:on 5:on 6:off [root@mybox etc]# /sbin/chkconfig --list alsa alsa 0:off 1:off 2:off 3:off 4:off 5:off 6:off i'm not sure if this is helpful or not, it said in the sound trouble shooting it will show you if my driver i need is loaded or not: [root@mybox etc]# /sbin/lsmod Module Size Used by sg 35676 0 nls_cp437 6336 1 vfat 11840 1 fat 47676 1 vfat cpufreq_ondemand 7144 0 cpufreq_conservative 8328 0 cpufreq_powersave 2272 0 p4_clockmod 5412 1 speedstep_lib 4356 1 p4_clockmod freq_table 4672 1 p4_clockmod raw 7648 1 md5 4576 1 ipv6 247936 10 snd_emu10k1 119972 0 snd_rawmidi 21312 1 snd_emu10k1 snd_seq_device 7884 2 snd_emu10k1,snd_rawmidi snd_ac97_codec 85180 1 snd_emu10k1 snd_pcm 83812 2 snd_emu10k1,snd_ac97_codec snd_timer 22596 2 snd_emu10k1,snd_pcm snd_page_alloc 9384 2 snd_emu10k1,snd_pcm snd_util_mem 4256 1 snd_emu10k1 snd_hwdep 7936 1 snd_emu10k1 snd 48644 7 snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwde p soundcore 8256 1 snd parport_pc 34020 1 lp 11080 0 parport 33864 2 parport_pc,lp ipt_IFWLOG 3876 1 ipt_psd 44424 1 ip_set_iptree 6568 2 ipt_REJECT 5344 4 ipt_LOG 7392 7 ipt_state 2304 14 ipt_pkttype 2176 4 ipt_set 2912 2 ipt_CONNMARK 2688 0 ipt_MARK 2976 0 ipt_ROUTE 5508 0 ipt_connmark 2208 0 ipt_owner 3904 0 ipt_recent 10412 0 ipt_iprange 2304 0 ipt_physdev 2736 0 ipt_multiport 3104 0 ipt_conntrack 2784 0 iptable_mangle 3008 0 ip_set_portmap 4864 0 ip_set_macipmap 4772 0 ip_set_ipmap 4864 0 ip_set_iphash 6948 0 ip_set 20284 11 ip_set_iptree,ipt_set,ip_set_portmap,ip_set_macipmap,ip_set_ipmap,ip_set_iphash ip_nat_irc 2816 0 ip_nat_tftp 2208 0 ip_nat_ftp 3552 0 iptable_nat 21524 3 ip_nat_irc,ip_nat_tftp,ip_nat_ftp ip_conntrack_irc 71376 1 ip_nat_irc ip_conntrack_tftp 4080 1 ip_nat_tftp ip_conntrack_ftp 72400 1 ip_nat_ftp ip_conntrack 42504 9 ipt_state,ipt_conntrack,ip_nat_irc,ip_nat_tftp,ip_nat_ftp,iptable_nat,ip_conntra ck_irc,ip_conntrack_tftp,ip_conntrack_ftp iptable_filter 3072 1 ip_tables 22656 20 ipt_IFWLOG,ipt_psd,ipt_REJECT,ipt_LOG,ipt_state,ipt_pkttype,ipt_set,ipt_CONNMARK ,ipt_MARK,ipt_ROUTE,ipt_connmark,ipt_owner,ipt_recent,ipt_iprange,ipt_physdev,ip t _multiport,ipt_conntrack,iptable_mangle,iptable_nat,iptable_filter r8169 23756 0 af_packet 19272 0 floppy 57108 1 eth1394 18536 0 video 15076 0 thermal 11944 0 tc1100_wmi 6084 0 processor 19560 1 thermal fan 4164 0 container 4000 0 button 5840 0 battery 8452 0 ac 4260 0 ide_cd 39172 0 ohci1394 34068 0 ieee1394 291832 2 eth1394,ohci1394 loop 16072 0 nls_iso8859_1 4672 2 ntfs 215448 1 supermount 33552 1 sr_mod 16516 0 nvram 9064 0 nvidia 3696136 12 agpgart 30252 1 nvidia usblp 12096 0 tsdev 7008 0 usbmouse 5184 0 usb_storage 83556 0 usbhid 46464 0 ata_piix 8260 0 ehci_hcd 31048 0 uhci_hcd 30960 0 usbcore 111612 7 usblp,usbmouse,usb_storage,usbhid,ehci_hcd,uhci_hcd evdev 8672 0 ext3 127784 2 jbd 54360 1 ext3 sd_mod 17280 6 ahci 9860 4 libata 43268 2 ata_piix,ahci scsi_mod 123560 6 sg,sr_mod,usb_storage,sd_mod,ahci,libata THanks! :D
  13. I wasn't able to use ur commands it kept saying unkown command... [root@mybox etc]# cat /etc/network/interfaces cat: /etc/network/interfaces: No such file or directory [root@mybox etc]# cat /etc/networking-scripts/ifcfg-eth0 cat: /etc/networking-scripts/ifcfg-eth0: No such file or directory [root@mybox etc]# slocate networking /etc/sysconfig/networking /etc/sysconfig/networking/devices /etc/sysconfig/networking/profiles /etc/sysconfig/networking/profiles/default /etc/sysconfig/networking/tmp /etc/sysconfig/networking/ifcfg-lo But tHanks alot, I finally got it to work! I had to do the oddest of things! What i had to do is the following, I had to add another host definition. I put the static IP address as the address, for name, i put mybox, alias, mybox as well. Thanks I think i got it working! What i had to do is the following, I had to add another host definition. I put the static IP address as the address, for name, i put mybox, alias, mybox as well. [root@mybox coffee]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 12.183.102.0 * 255.255.254.0 U 10 0 0 eth1 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default * 0.0.0.0 U 10 0 0 eth1 I pinged that static IP address and it worked! I got: [root@mybox coffee]# ping 66.249.87.104 PING 66.249.87.104 (66.249.87.104) 56(84) bytes of data. 64 bytes from 66.249.87.104: icmp_seq=1 ttl=242 time=111 ms 64 bytes from 66.249.87.104: icmp_seq=2 ttl=242 time=112 ms 64 bytes from 66.249.87.104: icmp_seq=3 ttl=242 time=113 ms 64 bytes from 66.249.87.104: icmp_seq=4 ttl=242 time=144 ms 64 bytes from 66.249.87.104: icmp_seq=5 ttl=242 time=120 ms --- 66.249.87.104 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 111.624/120.301/144.093/12.317 ms This is what my ipconfig looks like now: [root@mybox coffee]# ifconfig eth0 Link encap:UNSPEC HWaddr 00-50-8D-00-00-D0-C1-97-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:5 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth1 Link encap:Ethernet HWaddr 00:50:8D:D1:C1:97 inet addr:12.183.102.170 Bcast:12.183.103.255 Mask:255.255.254.0 inet6 addr: fe80::250:8dff:fed1:c197/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8931 errors:0 dropped:0 overruns:0 frame:0 TX packets:10503 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4994193 (4.7 MiB) TX bytes:876213 (855.6 KiB) Interrupt:16 Base address:0x8000 eth2 Link encap:UNSPEC HWaddr 00-02-3C-01-51-11-E9-25-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:4 dropped:4 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1495 errors:0 dropped:0 overruns:0 frame:0 TX packets:1495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:140269 (136.9 KiB) TX bytes:140269 (136.9 KiB) This didn't work though: [root@mybox coffee]# ping fec0:0:0:ffff::1 ping: unknown host fec0:0:0:ffff::1 I have no idea why device, eth0 or eth1 keeps switching on me! but it does! Sorry, i just paste what the console shows me. Now that my internet is working I get the following when i type in ifconfig: [root@mybox coffee]# ping fec0:0:0:ffff::1 ping: unknown host fec0:0:0:ffff::1 here is a link to show you what my configuration looks like and how its working http://img499.imageshack.us/img499/1232/snapshot12nf.png Thanks again for the help!! Is it bad that I made it into a static IP even though it does support dchp?
  14. Artic, I also had no idea why its showing 3 ethernet devices! I think its static, but I could be wrong. On windows its saying the following when i type in ipconfig /all Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Mr. Coffee>ipconf /all 'ipconf' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Mr. Coffee>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : OWNER-E2F654771 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC Physical Address. . . . . . . . . : Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 12.183.102.170 Subnet Mask . . . . . . . . . . . : 255.255.254.0 IP Address. . . . . . . . . . . . : fe80::250:8dff:fed1:c197%4 Default Gateway . . . . . . . . . : 12.183.101.1 DHCP Server . . . . . . . . . . . : 209.55.0.135 DNS Servers . . . . . . . . . . . : 65.83.241.181 67.32.118.46 fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 Lease Obtained. . . . . . . . . . : Saturday, February 18, 2006 4:07:09 PM Lease Expires . . . . . . . . . . : Sunday, February 19, 2006 9:50:12 AM Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : fe80::5445:5245:444f%5 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Disabled Tunnel adapter 6to4 Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : 6to4 Tunneling Pseudo-Interface Physical Address. . . . . . . . . : Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 2002:cb7:66aa::cb7:66aa Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301 2002:836b:213c::836b:213c DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Disabled Tunnel adapter Automatic Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Automatic Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 0C-B7-66-AA Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : fe80::5efe:12.183.102.170%2 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Disabled C:\Documents and Settings\Mr. Coffee> I have no idea what the heck those are! I don't have a wireless anything in my computer, just a regualr modem, and an ethernet card. How do I know if it accidently activated a lo(local Looopback) instead of eth0? And if it did, how do I fix it? SOrry i'm pretty new to linux! When you say network configure files, do you know where they are located the ones u want me to show you? Again this is a clean install I don't know how somthing could already be messed up with me not touching any system settings/files. Its my lucky day heh :)
  15. Hello everyone, a very odd thing has happened. Well orginally when i installed mandriva 2006 powerpack edition, the first boot up, no sound, and no internet connection. I reb00ted and it worked fine. Later I tried to change the machine name, totally messed up, and ended up making the internet stop working. So I just did a clean install, starting over from scratch. I'm having the same problems! I didn't change anything, but still no sound, and no internet. When I could connect to the internet, my machine name wasn't "localhost" it was like "x1-20-392-blah". But this time when I installed it just named it localhost. I'm not worried about the sound right now, i just need to be able to connect to the internet with mandriva 2006 Power Pack. Here is my iconfig result, and a few other commands to show you what my machine is doing. I am a n00b! [root@localhost coffee]# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:8D:D1:C1:97 inet addr:12.183.103.29 Bcast:255.255.255.255 Mask:255.255.254.0 inet6 addr: fe80::250:8dff:fed1:c197/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:389 errors:0 dropped:0 overruns:0 frame:0 TX packets:1494 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:23719 (23.1 KiB) TX bytes:90684 (88.5 KiB) Interrupt:16 Base address:0x2000 eth1 Link encap:UNSPEC HWaddr 00-50-8D-00-00-D0-C1-97-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:6 dropped:6 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth2 Link encap:UNSPEC HWaddr 00-02-3C-01-51-11-E9-25-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:6 dropped:6 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:713 errors:0 dropped:0 overruns:0 frame:0 TX packets:713 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:64605 (63.0 KiB) TX bytes:64605 (63.0 KiB) [root@localhost coffee]# ping www.google.com ping: unknown host www.google.com [root@localhost coffee]# cat /etc/resolv.conf nameserver 65.83.241.181 nameserver 67.32.118.46 [root@localhost home]# slocate resolv.conf /etc/resolv.conf /usr/share/man/man5/resolv.conf.5.bz2 [root@localhost home]# slocate resolv.conf.bak [root@localhost home]# ping 66.249.87.104 connect: Network is unreachable [root@localhost home]# [root@localhost etc]# cat hosts 127.0.0.1 localhost My ethernet card is located at eth0, and is a Realtek RTL8169/8110 Family Gigabit and i'm connecting to the internet through a cable modem. When my internet was working on mandriva it was set as a LAN connection. Even though this is the only computer hooked up into the internet and is not networked to any other machine. ANy help would be great! I'm running KDE 3.4, Mandriva 2006 PowerPack. This may help or hinder the problem, but some other guy from another forum told me the following: But this can't be the case now, because I've totally did a clean install, and I didn't mess with my host name.
×
×
  • Create New...