Chyrania

Couldn't figure out how to get this from Linux to Windows. Thank the lordy for command line ftp. ------------------------------------------------------------------------------------------ Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "6 7" EndSection # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config man page for details about the format of # this file. # ********************************************************************** Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" 0 0 EndSection Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer Load "dri" # direct rendering EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) # allows the server to start up even if the mouse does not work Option "allowmouseopenfail" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "compose:rwin" EndSection Section "Monitor" # Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4) ### Uncomment if you don't want to default to DDC: # HorizSync 30.0 - 81.0 # VertRefresh 56.0 - 75.0 Identifier "monitor1" VendorName "Plug'n Play" ModelName "SyncMaster" ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630 ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616 EndSection Section "Device" # Note: When OpenGL Overlay is enabled, Video Overlay # will be disabled automatically # === Screen Management === # === disable PnP Monitor === Identifier "device1" VendorName "ATI" BoardName "ATI Radeon (fglrx)" Driver "fglrx" Option "DPMS" Option "FSAAMSPosY1" "0.000000" Option "StereoSyncEnable" "1" #Option "NoDDC" Option "FSAAMSPosX5" "0.000000" Option "FSAAMSPosX2" "0.000000" Option "FSAAMSPosY4" "0.000000" Option "FSAAMSPosX4" "0.000000" Option "FSAAMSPosY0" "0.000000" Option "FSAADisableGamma" "no" # === Video Overlay for the Xv extension === Option "VideoOverlay" "on" Option "GammaCorrectionII" "0x00000000" Option "ForceGenericCPU" "no" Option "VRefresh2" "unspecified" Option "CenterMode" "off" Option "FSAAMSPosY5" "0.000000" Option "IgnoreEDID" "off" # === OpenGL Overlay === Option "OpenGLOverlay" "off" Option "FSAACustomizeMSPos" "no" # === FSAA === Option "FSAAScale" "1" # === FireGL DDX driver module specific settings === Option "DesktopSetup" "0x00000000" Option "HSync2" "unspecified" Option "TVHStartAdj" "0" Option "FSAAMSPosX0" "0.000000" Option "no_dri" "no" Option "GammaCorrectionI" "0x00000000" Option "BlockSignalsOnLock" "on" Option "FSAAMSPosX1" "0.000000" Option "UseInternalAGPGART" "no" Option "MonitorLayout" "AUTO, AUTO" # === Misc Options === Option "UseFastTLS" "0" # === disable/enable XAA/DRI === Option "no_accel" "no" # === OpenGL specific profiles/settings === Option "Capabilities" "0x00000000" Option "FSAAMSPosY3" "0.000000" Option "TVColorAdj" "0" Option "TVVPosAdj" "0" Option "TVStandard" "NTSC-M" Option "FSAAMSPosY2" "0.000000" # === TV-out Management === Option "NoTV" "yes" Option "TVHPosAdj" "0" Option "TVHSizeAdj" "0" # === QBS Support === Option "Stereo" "off" Option "ScreenOverlap" "0" Option "FSAAMSPosX3" "0.000000" Option "TVVSizeAdj" "0" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultDepth 24 Subsection "Display" Depth 8 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 15 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 16 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 24 Virtual 1280 1024 EndSubsection EndSection

The only storage I have is a DVD burner. I copied the mouse entries from my xorg.conf in the hope that it will point someone in the right direction: Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "dev/mouse" Option "ZAxisMapping" "6 7" Hope that helps a bit.

I'm still unable to boot into graphical mode. How do I print my xorg.conf while running at command line level? If I can figure that out, I will post my xorg.conf for you to look at.

Will give it a try. Thanks.

Guys, I cocked up my xorg.conf trying to get my MX510 to jump through hoops and now I can't boot into graphical mode. I figure if I access xorg.conf I can restore the original settings that I commented out. Exactly how I do edit xorg.conf from command line?

lakelover I'm having the same problem with my IP1000. As I have no idea what to do in tpconfig or tpsetup, can you post specific instructions? Thanks. ------------------------------------------------------- Got the driver working just fine.

Sorry , I meant KlamAV. You're right about Dazuko. Unfortunately, I get the same problem when I try to 'make' Dazuko.

I apologise for being uber green - only been using linux for a week. Anyway, i'm seeing this problem when I try to install klam: Configuration summary ======================= module events = ON_OPEN ON_CLOSE ON_EXEC devfs support = no rsbac support = yes stacking support = yes local __d_path() = yes module debug = no library 1.x compatibility = yes Note: For RSBAC you should copy the contents of this directory to: /lib/modules/2.6.12-12mdk/build/rsbac/adf/daz and recompile the kernel. Also make sure that the DAZ module has been enabled in the kernel configuration. ***** Running make... * make: *** No targets. Stop. ***** Return value 2 Any advice will be gratefully recieved.

Guys, what does this mean: * pre-install fglrx /sbin/modprobe "-k" "agpgart" If you are using the 2.6 kernel, add the following line instead: * install fglrx /sbin/modprobe --ignore-install fglrx && { /sbin/modprobe via-agp; /bin/true; } #change via-agp to your chipset agp driver I have a Radeon 9550 card.

Guys, i'm a Linux newbie and I don't know anything about installing the kernel source or configuring the ATI driver once it has been installed. Seeing as Linux has to be able to run Quake III mods if i'm going to stick with it, it's pretty important that I get this ATI problem solved. So, is anyone patient enough to be able to walk me through this problem? Just for the record, i'm using Mandriva 2006 with a Radeon 9550.