Steve Scrimpshire Posted October 6, 2003 Report Share Posted October 6, 2003 I'm sharing with a Win2K box with the Linux box as the server. No router/hub, just a crossover cable. The way I've done it before always worked, but now, it doesn't. I have searched here and google and cannot find the answer. I ran DrakGW, just like I've always done and I set up Win2K to get it's IP automagically. It gets the IP fine when I do ipconfig /renew, but I cannot surf. Here is my /etc/dhcpd.conf file: ddns-update-style none; subnet 192.168.0.0 netmask 255.255.255.0 { # default gateway option routers 192.168.0.1; option subnet-mask 255.255.255.0; option ip-forwarding on; option domain-name "omarserenity.no-ip.com"; option domain-name-servers 204.127.199.8, 63.240.76.198; range dynamic-bootp 192.168.0.16 192.168.0.253; default-lease-time 43200; max-lease-time 21600; } The option ip-forwarding was not in there by default after running DrakGW and I've tried it with and without. The option domain-name-servers, I've tried with only one ISP DNS server, with both (as you see here) and with just 192.168.0.1. My /etc/resolv.conf is fine. With the option domain-name-servers as 192.168.0.1, the name doesn't resolve in Windows...I just get "Finding site yahoo.com..." in the status bar or whatever. With the option domain-name-servers as you see them here, it resolves and I see "Connecting to site 216.109.118.65..." in the status bar, but it takes a few minutes and then goes to a "Page cannot be displayed" error (Cannot find server or DNS error). I have no idea how to troubleshoot this. Here is the output of ifconfig: eth0 Link encap:Ethernet HWaddr 00:0C:6E:84:CA:EF inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1957 errors:0 dropped:0 overruns:0 frame:0 TX packets:1657 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:201916 (197.1 Kb) TX bytes:223201 (217.9 Kb) Interrupt:4 eth1 Link encap:Ethernet HWaddr 00:90:64:B4:AC:DB inet addr:<<ip removed for privacy>> Bcast:255.255.255.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:685721 errors:0 dropped:0 overruns:0 frame:0 TX packets:6635 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:42317680 (40.3 Mb) TX bytes:434777 (424.5 Kb) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4168 errors:0 dropped:0 overruns:0 frame:0 TX packets:4168 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:242524 (236.8 Kb) TX bytes:242524 (236.8 Kb) and route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xxx.xxx.xxx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 xxx.xxx.xxx.1 0.0.0.0 UG 0 0 0 eth1 Of course in route -n, the xxx.xxx.xxx.0 and xxx.xxx.xxx.1 are actual ips Any thoughts? Does it have something to do with the Genmask of both adapters being 255.255.255.0? Quote Link to comment Share on other sites More sharing options...
Steve Scrimpshire Posted October 7, 2003 Author Report Share Posted October 7, 2003 I had installed 9.2rc2 with disks I had burned from the isos currently available for it. Since then, I have reinstalled 9.1 and am upgrading through urpmi and cooker to 9.2rc2. So far, it is working. Must be something broken in the isos. Quote Link to comment Share on other sites More sharing options...
Ric Posted October 7, 2003 Report Share Posted October 7, 2003 what dose the option ip-forwarding on do, I havent come across it before Ric Quote Link to comment Share on other sites More sharing options...
Steve Scrimpshire Posted October 7, 2003 Author Report Share Posted October 7, 2003 Well, I think with the latest DrakGW, it is taken care of elsewhere, but I added that, because in 8.1, that was one of the things that I had to do to get it to work and I was trying everything. What it did back then, was make sure that when the box behind the firewall surfed, it was seen as the same ip as the machine actually connected to the net. I think, in dhcpd.conf, all it really does is make sure the value inside some file (I forget which one) is '1' to enable that. I think, for iptables. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.