jlc Posted October 2, 2003 Report Share Posted October 2, 2003 Give tvtime a try too. I did and thank you - what a ripper - very pleased with this one !!! Although I may have gone over to Slackware from Mandrake I still find this place the friendliest and most helpful. Thanks again cybrjackle. I agree, I visit a lot of boards, but this is the BEST one! I might be biased. :wink: Quote Link to comment Share on other sites More sharing options...
Guest mahiles Posted October 2, 2003 Report Share Posted October 2, 2003 Oh dear another problem: cdrdao 1.1.7 does not support ATAPIThe configured version of cdrdao does not support writing to ATAPI devices without SCSI emulation and there is at least one writer in your system not configured to use SCSI emulation. Solution: The best and recommended solution is to enable ide-scsi (SCSI emulation) for all writer devices. This way you won't have any problems. Or you install (or select as the default) a more recent version of cdrdao. Seems like I'm coming up with problems quicker than solutions :? Quote Link to comment Share on other sites More sharing options...
jlc Posted October 2, 2003 Report Share Posted October 2, 2003 Oh dear another problem: cdrdao 1.1.7 does not support ATAPIThe configured version of cdrdao does not support writing to ATAPI devices without SCSI emulation and there is at least one writer in your system not configured to use SCSI emulation. Solution: The best and recommended solution is to enable ide-scsi (SCSI emulation) for all writer devices. This way you won't have any problems. Or you install (or select as the default) a more recent version of cdrdao. Seems like I'm coming up with problems quicker than solutions :? Add this to your lilo.conf: #vi /etc/lilo.conf append="hdX=ide-scsi" X = your burner. Example Bellow: image=/boot/vmlinuz label="linux" root=/dev/hda3 initrd=/boot/initrd.img append="devfs=mount hdd=ide-scsi acpi=off" read-only Quote Link to comment Share on other sites More sharing options...
Guest mahiles Posted October 2, 2003 Report Share Posted October 2, 2003 Tried it and still get the same error when starting k3b Quote Link to comment Share on other sites More sharing options...
jlc Posted October 2, 2003 Report Share Posted October 2, 2003 Tried it and still get the same error when starting k3b When you ran k3bsetup as root, did you see your bruner in the list of devices? Did you change the driver to something like "mmc-generic"? I'm not in front of my box right now, so I'm makeing some guess. I know I have got that error before and it still worked, a little odd, but none the less it still worked. Are you trying to burn an ISO or something? Or just makeing sure everything works? Quote Link to comment Share on other sites More sharing options...
jlc Posted October 2, 2003 Report Share Posted October 2, 2003 Actually lets try this: #modprobe ide-scsi IF you don't get any error messages, open up k3b and see what happens. If that doesn't work, see what the following output's & post it. #lsmod |grep scsi #cdrecord -scanbus Quote Link to comment Share on other sites More sharing options...
Guest mahiles Posted October 2, 2003 Report Share Posted October 2, 2003 The modprobe ide-scsi didn't work and so heres the output of the other commands: root@darkstar:/home/mark# lsmod |grep scsi ide-scsi 9424 0 root@darkstar:/home/mark# cdrecord --scanbus Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. Quote Link to comment Share on other sites More sharing options...
jlc Posted October 2, 2003 Report Share Posted October 2, 2003 Um, when you added append="hdX=ide-scsi" to your /etc/lilo.conf Did you run #lilo and then reboot? I left that part out. Quote Link to comment Share on other sites More sharing options...
jlc Posted October 2, 2003 Report Share Posted October 2, 2003 The modprobe ide-scsi didn't work and so heres the output of the other commands: root@darkstar:/home/mark# lsmod |grep scsi ide-scsi 9424 0 root@darkstar:/home/mark# cdrecord --scanbus Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. Also, I made an error it is just #cdrecord -scanbus Quote Link to comment Share on other sites More sharing options...
Guest mahiles Posted October 2, 2003 Report Share Posted October 2, 2003 now i feel dumb i 4got to run "lilo" but I did and now it works :D Thanks cybrjackle.. Ok so now I've still got the other problems and I've also noticed that DVD playback isn't happening. I've got xine and libdvdcss installed wot else do I need? Quote Link to comment Share on other sites More sharing options...
jlc Posted October 2, 2003 Report Share Posted October 2, 2003 What happens when you open up xine? Do you see chapters and stuff on the DVD or does it have any output? Also try another dvd if you haven't already to see what will happen. Quote Link to comment Share on other sites More sharing options...
Guest mahiles Posted October 2, 2003 Report Share Posted October 2, 2003 Ahh now my cdrom is screwed up!! root@darkstar:/home/mark# mount /mnt/cdrom mount: wrong fs type, bad option, bad superblock on /dev/cdrom, or too many mounted file systems (could this be the IDE device where you in fact use ide-scsi so that sr0 or sda or so is needed?) Heres what console says when I start xine, I'd show what it says when tying to play a DVD but I can't mount my cdrom drive!! root@darkstar:/home/mark# xine This is xine (X11 gui) - a free video player v0.9.22. (c) 2000-2003 The xine Team. Built with xine library 1.0.0 (1-rc0a) Found xine library version: 1.0.0 (1-rc0a). XServer Vendor: The XFree86 Project, Inc. Release: 40300000, Protocol Version: 11, Revision: 0, Available Screen(s): 1, using 0 Depth: 24. XShmQueryVersion: 1.1. -[ xiTK version 0.10.5 [XMB]]- -[ xiTK will use XShm ]- -[ WM type: (EWMH) KWIN {KWin} ]- Display is not using Xinerama. main: probing <aadxr3> video output plugin load_plugins: failed to load video output plugin <aadxr3> main: probing <dxr3> video output plugin load_plugins: failed to load video output plugin <dxr3> main: probing <xv> video output plugin load_plugins: failed to load video output plugin <xv> main: probing <SyncFB> video output plugin video_out_syncfb: aborting. (unable to open syncfb device "/dev/syncfb") load_plugins: failed to load video output plugin <SyncFB> main: probing <aa> video output plugin load_plugins: failed to load video output plugin <aa> main: probing <xshm> video output plugin main: probing <alsa> audio output plugin xine_interface: unknown param 10 xine_interface: unknown param 10 xine_interface: unknown param 10 xine_interface: unknown param 10 video_out_xshm: tried to set unsupported property 2 Quote Link to comment Share on other sites More sharing options...
jlc Posted October 2, 2003 Report Share Posted October 2, 2003 Ahh now my cdrom is screwed up!! root@darkstar:/home/mark# mount /mnt/cdrom<!--QuoteEBegin--><!--QuoteEBegin-->mount: wrong fs type, bad option, bad superblock on /dev/cdrom,<!--QuoteEBegin--><!--QuoteEBegin--> or too many mounted file systems<!--QuoteEBegin--><!--QuoteEBegin--> (could this be the IDE device where you in fact use<!--QuoteEBegin--><!--QuoteEBegin--> ide-scsi so that sr0 or sda or so is needed?)<!--QuoteEBegin--><!--QuoteEBegin--> Heres what console says when I start xine, I'd show what it says when tying to play a DVD but I can't mount my cdrom drive!! root@darkstar:/home/mark# xine<!--QuoteEBegin--><!--QuoteEBegin-->This is xine (X11 gui) - a free video player v0.9.22.<!--QuoteEBegin--><!--QuoteEBegin-->(c) 2000-2003 The xine Team.<!--QuoteEBegin--><!--QuoteEBegin-->Built with xine library 1.0.0 (1-rc0a)<!--QuoteEBegin--><!--QuoteEBegin-->Found xine library version: 1.0.0 (1-rc0a).<!--QuoteEBegin--><!--QuoteEBegin-->XServer Vendor: The XFree86 Project, Inc. Release: 40300000,<!--QuoteEBegin--><!--QuoteEBegin--> Protocol Version: 11, Revision: 0,<!--QuoteEBegin--><!--QuoteEBegin--> Available Screen(s): 1, using 0<!--QuoteEBegin--><!--QuoteEBegin--> Depth: 24.<!--QuoteEBegin--><!--QuoteEBegin--> XShmQueryVersion: 1.1.<!--QuoteEBegin--><!--QuoteEBegin-->-[ xiTK version 0.10.5 [XMB]]-<!--QuoteEBegin--><!--QuoteEBegin-->-[ xiTK will use XShm ]-<!--QuoteEBegin--><!--QuoteEBegin-->-[ WM type: (EWMH) KWIN {KWin} ]-<!--QuoteEBegin--><!--QuoteEBegin-->Display is not using Xinerama.<!--QuoteEBegin--><!--QuoteEBegin-->main: probing <aadxr3> video output plugin<!--QuoteEBegin--><!--QuoteEBegin-->load_plugins: failed to load video output plugin <aadxr3><!--QuoteEBegin--><!--QuoteEBegin-->main: probing <dxr3> video output plugin<!--QuoteEBegin--><!--QuoteEBegin-->load_plugins: failed to load video output plugin <dxr3><!--QuoteEBegin--><!--QuoteEBegin-->main: probing <xv> video output plugin<!--QuoteEBegin--><!--QuoteEBegin-->load_plugins: failed to load video output plugin <xv><!--QuoteEBegin--><!--QuoteEBegin-->main: probing <SyncFB> video output plugin<!--QuoteEBegin--><!--QuoteEBegin-->video_out_syncfb: aborting. (unable to open syncfb device "/dev/syncfb")<!--QuoteEBegin--><!--QuoteEBegin-->load_plugins: failed to load video output plugin <SyncFB><!--QuoteEBegin--><!--QuoteEBegin-->main: probing <aa> video output plugin<!--QuoteEBegin--><!--QuoteEBegin-->load_plugins: failed to load video output plugin <aa><!--QuoteEBegin--><!--QuoteEBegin-->main: probing <xshm> video output plugin<!--QuoteEBegin--><!--QuoteEBegin-->main: probing <alsa> audio output plugin<!--QuoteEBegin--><!--QuoteEBegin-->xine_interface: unknown param 10<!--QuoteEBegin--><!--QuoteEBegin-->xine_interface: unknown param 10<!--QuoteEBegin--><!--QuoteEBegin-->xine_interface: unknown param 10<!--QuoteEBegin--><!--QuoteEBegin-->xine_interface: unknown param 10<!--QuoteEBegin--><!--QuoteEBegin-->video_out_xshm: tried to set unsupported property 2<!--QuoteEBegin--><!--QuoteEBegin--> I don't believe you have to mount a DVD, just put the DVD in and fire up xine. Quote Link to comment Share on other sites More sharing options...
Guest mahiles Posted October 2, 2003 Report Share Posted October 2, 2003 Ok then I put the dvd in and this is what happened in console: mark@darkstar:~$ xine This is xine (X11 gui) - a free video player v0.9.22. (c) 2000-2003 The xine Team. Built with xine library 1.0.0 (1-rc0a) Found xine library version: 1.0.0 (1-rc0a). XServer Vendor: The XFree86 Project, Inc. Release: 40300000, Protocol Version: 11, Revision: 0, Available Screen(s): 1, using 0 Depth: 24. XShmQueryVersion: 1.1. -[ xiTK version 0.10.5 [XMB]]- -[ xiTK will use XShm ]- -[ WM type: (EWMH) KWIN {KWin} ]- Display is not using Xinerama. main: probing <aadxr3> video output plugin load_plugins: failed to load video output plugin <aadxr3> main: probing <dxr3> video output plugin load_plugins: failed to load video output plugin <dxr3> main: probing <xv> video output plugin load_plugins: failed to load video output plugin <xv> main: probing <SyncFB> video output plugin video_out_syncfb: aborting. (unable to open syncfb device "/dev/syncfb") load_plugins: failed to load video output plugin <SyncFB> main: probing <aa> video output plugin load_plugins: failed to load video output plugin <aa> main: probing <xshm> video output plugin main: probing <alsa> audio output plugin load_plugins: failed to load audio output plugin <alsa> main: probing <oss> audio output plugin xine_interface: unknown param 10 xine_interface: unknown param 10 xine_interface: unknown param 10 xine_interface: unknown param 10 video_out_xshm: tried to set unsupported property 2 libdvdnav: Using dvdnav version 1-rc0a from http://xine.sf.net libdvdread: Using libdvdcss version 1.2.8 for DVD access libdvdnav: Can't read name block. Probably not a DVD-ROM device. libdvdnav: Unable to find map file '/home/mark/.dvdnav/.map' libdvdread: Can't open file VIDEO_TS.IFO. libdvdnav: vm: faild to read VIDEO_TS.IFO libdvdnav: Using dvdnav version 1-rc0a from http://xine.sf.net libdvdread: Using libdvdcss version 1.2.8 for DVD access libdvdnav: Can't read name block. Probably not a DVD-ROM device. libdvdnav: Unable to find map file '/home/mark/.dvdnav/.map' libdvdread: Can't open file VIDEO_TS.IFO. libdvdnav: vm: faild to read VIDEO_TS.IFO libdvdnav: Using dvdnav version 1-rc0a from http://xine.sf.net libdvdread: Using libdvdcss version 1.2.8 for DVD access libdvdnav: Can't read name block. Probably not a DVD-ROM device. libdvdnav: Unable to find map file '/home/mark/.dvdnav/.map' libdvdread: Can't open file VIDEO_TS.IFO. libdvdnav: vm: faild to read VIDEO_TS.IFO In the GUI I get 2 errors. The 1st says "Input plugin failed to open mrl 'dvd:/'. The 2nd says "The source can't be read. Maybe you don't have enough rights for this, or source doesn't contain data (e.g. not disk in drive) (/mnt/cdrom)" Plus the fact I still need to be able to mount cds even if dvds dont require it.. Quote Link to comment Share on other sites More sharing options...
jlc Posted October 2, 2003 Report Share Posted October 2, 2003 In the GUI I get 2 errors. The 1st says "Input plugin failed to open mrl 'dvd:/'. The 2nd says "The source can't be read. Maybe you don't have enough rights for this, or source doesn't contain data (e.g. not disk in drive) (/mnt/cdrom)" Plus the fact I still need to be able to mount cds even if dvds dont require it.. FIrst, I'm getting ready to leave work so I will have to do some searching late tonight or tomorrow on your errors. Second, do you have a DVD & a Burner seperate or are they some kind of combo drive? Along with that, in the xine gui there is a setup and sometimes it's not pointed to the right dir for your dvd player. Third, did you put in a data cd and "#mount /mnt/cdrom" use the 2 disc of the install were the extra packages are. Just try and mount that cd and see what happens. Forth, when you view your /etc/fstab, what's in there. # more /etc/fstab Fifth, ok there is no 5 for now! You got off easy. :roll: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.