Issues with devices on 2009

[Jza]

I got a couple of USB devices that get recognized correctly but proc shows nothing about them.

 

One is Bluetooth, the other is a USB microphone.

 

The bluetooth returns the dmesg:

usb 5-1: new full speed USB device using uhci_hcd and address 3
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: New USB device found, idVendor=1131, idProduct=1001
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: ISSCBTA

The USB microphone return this:

usb 4-1: USB disconnect, address 3
usb 4-1: new full speed USB device using uhci_hcd and address 4
usb 4-1: configuration #1 chosen from 1 choice
usb 4-1: New USB device found, idVendor=17a0, idProduct=0001
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Samson C01U			  
usb 4-1: Manufacturer: Samson Technologies

 

lsusb is shows the device:

Bus 001 Device 002: ID 059b:0272 Iomega Corp. 
Bus 001 Device 001: ID 1d6b:0002  
Bus 005 Device 003: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
Bus 005 Device 001: ID 1d6b:0001  
Bus 004 Device 001: ID 1d6b:0001  
Bus 003 Device 002: ID 041e:4034 Creative Technology, Ltd 
Bus 003 Device 001: ID 1d6b:0001  
Bus 002 Device 001: ID 1d6b:0001

 

lsusb -n4 grep Samson:

481-  bMaxPacketSize0		 8
482-  idVendor		   0x17a0 
483-  idProduct		  0x0001 
484-  bcdDevice			0.01
485:  iManufacturer		   1 Samson Technologies	  
486:  iProduct				2 Samson C01U			  
487-  iSerial				 0 
488-  bNumConfigurations	  1
489-  Configuration Descriptor:
490-	bLength				 9

 

Everything looks ok until I want to use this:

 

cat /proc/asound/cards
0 [Intel		  ]: HDA-Intel - HDA Intel
				  HDA Intel at 0xd0340000 irq 22

 

which should be:

0 [Intel		  ]: HDA-Intel - HDA Intel
					  HDA Intel at 0xfbdb8000 irq 169
 1 [default		]: USB-Audio - Samson Q1U			   
					  Samson Technologies	   Samson Q1U at usb-0000:00:1d.1-1, full

[adamw]

What's the output of:

 

lspcidrake -v

 

run as root?

 

(Yes, I know these aren't PCI devices - lspcidrake will actually show USB devices too).