Guest Mobidoy Posted October 9, 2006 Report Share Posted October 9, 2006 (edited) Hello all, i have Mandiva free 2007 installed on my Laptop. The FGLRX drivers are properly installed but i just cant get AIGLX in 3d desktop. There is no problem with XGL but AIGLX is greyed out. Could someone help me with that issue please. here is my xorg.conf: Also f you see Obvious thing that i should modify in my Xorg.conf, please let me know. I am only 3 days old into Linux. # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "Files" # font server independent of the X server to render fonts. FontPath "unix/:-1" # minimal fonts to allow X to run without xfs FontPath "/usr/share/fonts/misc:unscaled" EndSection Section "Extensions" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer Load "dri" # direct rendering EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "ca" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" EndSection Section "InputDevice" Identifier "Mouse2" Driver "evdev" Option "product" "0xc041" Option "vendor" "0x046d" Option "HWheelRelativeAxisButtons" "7 6" EndSection Section "InputDevice" Identifier "SynapticsMouse1" Driver "synaptics" Option "SHMConfig" "on" EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1280x800" HorizSync 31.5-90 VertRefresh 60 # Monitor preferred modeline (60.0 Hz vsync, 49.0 kHz hsync, ratio 16/10) ModeLine "1280x800" 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync EndSection Section "Device" Identifier "device1" BoardName "ATI Radeon (fglrx)" Driver "fglrx" Option "DPMS" Option "FSAAMSPosY1" "0.000000" Option "FSAAMSPosY1" "0.000000" Option "StereoSyncEnable" "1" Option "StereoSyncEnable" "1" # === disable PnP Monitor === #Option "NoDDC" Option "FSAAMSPosX5" "0.000000" Option "FSAAMSPosX5" "0.000000" Option "FSAAMSPosY4" "0.000000" Option "FSAAMSPosY4" "0.000000" Option "FSAAMSPosX2" "0.000000" Option "FSAAMSPosX2" "0.000000" Option "FSAAMSPosX4" "0.000000" Option "FSAAMSPosX4" "0.000000" Option "FSAAMSPosY0" "0.000000" Option "FSAAMSPosY0" "0.000000" Option "FSAADisableGamma" "no" Option "FSAADisableGamma" "no" # === Video Overlay for the Xv extension === Option "VideoOverlay" "on" Option "VideoOverlay" "on" Option "ForceGenericCPU" "no" Option "ForceGenericCPU" "no" Option "GammaCorrectionII" "0x00000000" Option "GammaCorrectionII" "0x00000000" Option "VRefresh2" "unspecified" Option "VRefresh2" "unspecified" Option "FSAAMSPosY5" "0.000000" Option "FSAAMSPosY5" "0.000000" Option "CenterMode" "off" Option "CenterMode" "off" Option "IgnoreEDID" "off" Option "IgnoreEDID" "off" # === OpenGL Overlay === # Note: When OpenGL Overlay is enabled, Video Overlay # will be disabled automatically Option "OpenGLOverlay" "off" Option "OpenGLOverlay" "off" Option "FSAACustomizeMSPos" "no" Option "FSAACustomizeMSPos" "no" # === FSAA === Option "FSAAScale" "1" Option "FSAAScale" "1" # === FireGL DDX driver module specific settings === # === Screen Management === Option "DesktopSetup" "0x00000000" Option "DesktopSetup" "0x00000000" Option "HSync2" "unspecified" Option "HSync2" "unspecified" Option "TVHStartAdj" "0" Option "TVHStartAdj" "0" Option "FSAAMSPosX0" "0.000000" Option "FSAAMSPosX0" "0.000000" Option "no_dri" "no" Option "no_dri" "no" Option "GammaCorrectionI" "0x00000000" Option "GammaCorrectionI" "0x00000000" Option "FSAAMSPosX1" "0.000000" Option "FSAAMSPosX1" "0.000000" Option "BlockSignalsOnLock" "on" Option "BlockSignalsOnLock" "on" Option "UseInternalAGPGART" "no" Option "UseInternalAGPGART" "no" Option "MonitorLayout" "AUTO, AUTO" Option "MonitorLayout" "AUTO, AUTO" # === disable/enable XAA/DRI === Option "no_accel" "no" Option "no_accel" "no" # === Misc Options === Option "UseFastTLS" "0" Option "UseFastTLS" "0" Option "FSAAMSPosY3" "0.000000" Option "FSAAMSPosY3" "0.000000" # === OpenGL specific profiles/settings === Option "Capabilities" "0x00000000" Option "Capabilities" "0x00000000" Option "TVStandard" "NTSC-M" Option "TVStandard" "NTSC-M" Option "TVVPosAdj" "0" Option "TVVPosAdj" "0" Option "TVColorAdj" "0" Option "TVColorAdj" "0" Option "FSAAMSPosY2" "0.000000" Option "FSAAMSPosY2" "0.000000" # === TV-out Management === Option "NoTV" "yes" Option "NoTV" "yes" Option "TVHSizeAdj" "0" Option "TVHSizeAdj" "0" Option "TVHPosAdj" "0" Option "TVHPosAdj" "0" Option "ScreenOverlap" "0" Option "ScreenOverlap" "0" # === QBS Support === Option "Stereo" "off" Option "Stereo" "off" Option "FSAAMSPosX3" "0.000000" Option "FSAAMSPosX3" "0.000000" Option "TVVSizeAdj" "0" Option "TVVSizeAdj" "0" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x800" EndSubsection Subsection "Display" Depth 15 Modes "1280x800" EndSubsection Subsection "Display" Depth 16 Modes "1280x800" EndSubsection Subsection "Display" Depth 24 Modes "1280x800" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" InputDevice "Mouse2" "SendCoreEvents" InputDevice "SynapticsMouse1" "AlwaysCore" Screen "screen1" EndSection Thanx Mobi Edited October 9, 2006 by Mobidoy Quote Link to comment Share on other sites More sharing options...
tyme Posted October 10, 2006 Report Share Posted October 10, 2006 what version of the fglrx drivers are you running? 8.27.10 or newer? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.