adamato Posted December 10, 2005 Report Share Posted December 10, 2005 Hello, I have a MSI megabook s270 (with AMD turion 64 MT37) I have troubles configuring the wireless card [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)width: 32 bits I got ndiswrapper-1.6/, installed it with the option: export INPROCOMM_AMD64=1 make make install I installed the ndiswrapper following the procedure below: downloaded inprocomm drivers 64 bits from http://www.planetamd64.com/index.php?act=A...ype=post&id=435 ndiswrapper -i i2220nta.inf modprobe ndiswrapper the last command gives: FATAL: Error inserting ndiswrapper (/lib/modules/2.6.12-12mdk/misc/ndiswrapper.ko): Invalid argument Could anybody help me? Thanks adamato Quote Link to comment Share on other sites More sharing options...
devries Posted December 11, 2005 Report Share Posted December 11, 2005 That probably means the ndiswrapper module wasnt build with the correct kernel-source. Make sure the kerne-source and kernel match exactly, (with uname -r you get your kernel version) Quote Link to comment Share on other sites More sharing options...
adamato Posted December 13, 2005 Author Report Share Posted December 13, 2005 I have 2.6.12-12mdk (kernel) 2.6-2.6.12-12mdk (kernel-source) 2.6-2.6.12-12mdk kernel-source-stripped installed. I don't know if those are compatible each other... Quote Link to comment Share on other sites More sharing options...
adamato Posted December 16, 2005 Author Report Share Posted December 16, 2005 I downloaded a CVS version of ndiswrapper and compiled now I get no errors doing ndiswrapper -i neti2220x64 modprobe ndiswrapper doing dmesg I get ... ndiswrapper version 1.7 loaded (preempt=no,smp=no) ndiswrapper (load_pe_images:571): fixing KI_USER_SHARED_DATA address in the driv er ndiswrapper: driver neti2220x64 (,17/01/2005,3.03.12.2006) loaded ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 22 (level, low) -> IRQ 217 ndiswrapper: using irq 217 wlan0: vendor: 'INPROCOMM IPN2220 Wireless LAN Adapter' wlan0: ndiswrapper ethernet device 00:11:09:2a:66:d7 using driver neti2220x64, 1 7FE:2220.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP w ith WPA, WPA2, WPA2PSK ... so, all seems to be OK, BUT: iwconfig get stuck in ifconfig I do have wlan0: wlan0 Link encap:Ethernet HWaddr 00:11:09:2A:66:D7 inet6 addr: fe80::211:9ff:fe2a:66d7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:217 Memory:fbffe800-fbfff000 but I dont know to confifure it : how to select available nets, hot to set wep encryption, and so on thanks for your replay adamato Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.