Art Posted May 7, 2004 Report Share Posted May 7, 2004 Hi: I went about installing Mandrake 10 on my computer which is Intel Pentium 4 Celeron Processor 2.7 GHz, 256 DDR RAM, I created all the partition loaded all the stuff, chose standard PC (internet edition) I did not get Firewall, but I could select it later. I chose Lexmark Printer (mine is X1150) but mandrake chose Lexmark 3000, the test page did not produce any page, Some problems with setting up Modem (external) could not resovle /conf. Well I skipped the boot loader, then had to reuse the DVD to rescue and create a boot loader. Now after boot, I get the boot loader with options Linux-smp Linux Linux-fb Windows failsafe. I chose the first three, It loads the OS, then I get to a login prompt then I login then if I try xinit I get a message with a lot of warnings stating errors from xkncomp are not fatal to X Server xvt: unknown option '-n' xvt: use --help to get a list of available commandline options. My Graphics card is a RIVA TNT Nvedia 34Meg card. Also in the boot up process VTA Technolgies sound card fails to be loaded. In the boot sequence in the begining I get a message stating : IDE Channel 80 cable not connect at 0 This is my first boot how to I get to the Xwindows and start the OS. I have Window XP besides loading Mandrake 10 . Thanks, Art Quote Link to comment Share on other sites More sharing options...
liquidzoo Posted May 7, 2004 Report Share Posted May 7, 2004 When you get to the login prompt, login with your username and password, then type startx See if that starts the X server. If it does, then we can tackle your other problems (modem, sound) in other threads. If it doesn't, please post the error message that you get here. Quote Link to comment Share on other sites More sharing options...
Art Posted May 7, 2004 Author Report Share Posted May 7, 2004 Hi: Thanks; I got it working finally. I was trying setup the fonts for Mozilla, and Mozilla disappeared cannot start Mozilla how many evr times I try. Is standard Internet edition with a Firewall. I dont Viruses on my PC. I still need to get my printer working. Also, there is a message in the begining at the boot IDE 80 cable connection at 0 or something like to this. After Linux loads I get a message stating cannot load sound drivers for the Mixer or something like that. Thanks, Art Art Quote Link to comment Share on other sites More sharing options...
iphitus Posted May 7, 2004 Report Share Posted May 7, 2004 (edited) http://linuxprinting.org/printer_list.cgi See if you can find your printer there. Is the modem working? Does sound work? Please run these commands at the command line for us and tell us what they say. lspci lsmod dmesg mozilla Edited May 7, 2004 by iphitus Quote Link to comment Share on other sites More sharing options...
Art Posted May 7, 2004 Author Report Share Posted May 7, 2004 Modem & sound works: here is what I messages I get lspci: 00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 50) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) dmesg: Linux version 2.6.3-4mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandr ake Linux 10.0 3.3.2-6mdk)) #1 Tue Mar 2 07:26:13 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 255MB LOWMEM available. found SMP MP-table at 000f51d0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 VIAP4X ) @ 0x000f6bf0 ACPI: RSDT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 ACPI: FADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 ACPI: MADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff6f80 ACPI: DSDT (v001 VIAP4X AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Built 1 zonelists Kernel command line: BOOT_IMAGE=linux ro root=304 devfs=mount acpi=ht resume=/de v/hda5 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 2700.593 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Memory: 255424k/262080k available (1815k kernel code, 5920k reserved, 846k data, 272k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5341.18 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 51k freed CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel® Celeron® CPU 2.70GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-20, 2-22 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 24. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 71 0d 001 01 0 0 0 0 0 1 1 79 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 0 0 0 0 0 1 1 89 10 001 01 1 1 0 1 0 1 1 91 11 001 01 1 1 0 1 0 1 1 91 12 001 01 1 1 0 1 0 1 1 99 13 001 01 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 A9 16 000 00 1 0 0 0 0 0 0 00 17 001 01 1 1 0 1 0 1 1 B1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:19 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:18 IRQ11 -> 0:16-> 0:17 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ21 -> 0:21 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2699.0773 MHz. ..... host bus clock speed is 99.0991 MHz. NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040211 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 © Adam Belay PnPBIOS: Disabled PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0 PCI->APIC IRQ transform: (B0,I16,P0) -> 21 PCI->APIC IRQ transform: (B0,I16,P1) -> 21 PCI->APIC IRQ transform: (B0,I16,P2) -> 21 PCI->APIC IRQ transform: (B0,I16,P3) -> 19 PCI->APIC IRQ transform: (B0,I17,P0) -> 18 PCI->APIC IRQ transform: (B0,I17,P2) -> 18 PCI->APIC IRQ transform: (B0,I18,P0) -> 23 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 vesafb: framebuffer at 0xe4000000, mapped to 0xd0800000, size 16384k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:0336 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5 PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 14856 bytes , found (800x600, 14808 bytes, v3). Console: switching to colour frame buffer device 92x32 pty: 1024 Unix98 ptys configured Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA hda: ST3120022A, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: GENERIC DVD DUAL 4XMax, ATAPI CD/DVD-ROM drive hdd: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > p3 p4 Console: switching to colour frame buffer device 92x32 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 EISA: Probing bus 0 at eisa0 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET: Registered protocol family 1 BIOS EDD facility v0.12 2004-Jan-26, 1 devices found Please report your BIOS at http://linux.dell.com/edd/results.html Resume Machine: resuming from /dev/hda5 Resuming from device hda5 Resume Machine: This is normal swap space PM: Reading pmdisk image. PM: Resume from disk failed. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Mounted devfs on /dev Freeing unused kernel memory: 272k freed Real Time Clock Driver v1.12 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 21, io base 0000d000 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 21, io base 0000d400 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 21, io base 0000d800 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: request interrupt 19 failed drivers/usb/core/hcd-pci.c: init 0000:00:10.3 fail, -38 ehci_hcd: probe of 0000:00:10.3 failed with error -38 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Adding 514040k swap on /dev/hda5. Priority:-1 extents:1 SCSI subsystem initialized imm: Version 2.05 (for Linux 2.4.0) parport0: PC-style at 0x378 [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) ppa: Version 2.07 (for Linux 2.4.x) Linux agpgart interface v0.100 © Dave Jones agpgart: Detected VIA P4M266x/P4N266 chipset agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 64M @ 0xe0000000 Supermount version 2.0.4 for kernel 2.6 NTFS driver 2.1.6 [Flags: R/O MODULE]. NTFS volume version 3.1. NTFS volume version 3.1. inserting floppy driver for 2.6.3-4mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) ide-floppy driver 0.99.newide drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver NET: Registered protocol family 17 via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. unable to grab IRQ 18 VIA 82xx Audio: probe of 0000:00:11.5 failed with error -16 Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5 via82cxxx: Six channel audio available PCI: Setting latency timer of device 0000:00:11.5 to 64 ac97_codec: AC97 Audio codec, id: ICE82 (Unknown) via82cxxx: unable to obtain IRQ 18, aborting via82cxxx: interrupt init failed, aborting via82cxxx: probe of 0000:00:11.5 failed with error -16 mtrr: 0xe4000000,0x2000000 overlaps existing 0xe4000000,0x1000000 lp0: using parport0 (polling). lp0: console ready atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 0 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 1 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 2 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 3 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 4 changed to on bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 5 changed to on NET: Registered protocol family 10 Disabled Privacy Extensions on device c035fa20(lo) IPv6 over IPv4 tunneling driver cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! mozilla Floating point exception lsmod bash: lsmod: command not found Quote Link to comment Share on other sites More sharing options...
Art Posted May 8, 2004 Author Report Share Posted May 8, 2004 Hi: I tried removing Mozilla 1.6.9 & then replacing it with Mozilla firefox, then it opens up. I choose my fonts and style, it never opens again. I get the same message stating floating point exception. lsmod gets the message as above; strange,that the man for lsmod comes up OK. It looks pretty strange to me. Hope some Mandrake Guru can fix these bugs. Thanks, Art Quote Link to comment Share on other sites More sharing options...
spinynorman Posted May 8, 2004 Report Share Posted May 8, 2004 lsmod gets the message as above; strange,that the man for lsmod comes up OK. You have to be root to run lsmod, so type 'su', enter your root password, then type 'lsmod'. :) Type 'exit' when you want to return to your own user. Quote Link to comment Share on other sites More sharing options...
Art Posted May 9, 2004 Author Report Share Posted May 9, 2004 HI: Here is what I get for lsmod after su. Module Size Used by sg 38044 0 sr_mod 17060 0 lp 12200 0 snd-pcm-oss 51812 0 snd-mixer-oss 17952 1 snd-pcm-oss snd-vx222 13120 0 snd-vx-lib 31520 1 snd-vx222 snd-pcm 93156 2 snd-pcm-oss,snd-vx-lib snd-page-alloc 11972 1 snd-pcm snd-timer 24484 1 snd-pcm snd-hwdep 8928 1 snd-vx-lib snd 52484 7 snd-pcm-oss,snd-mixer-oss,snd-vx222,snd-vx-lib,s nd-pcm,snd-timer,snd-hwdep via82cxxx_audio 26952 0 soundcore 9248 2 snd,via82cxxx_audio ac97_codec 17804 1 via82cxxx_audio af_packet 20520 0 hid 53312 0 raw 7616 2 ide-floppy 18752 0 ide-tape 34864 0 ide-cd 40548 1 cdrom 37184 2 sr_mod,ide-cd floppy 59444 0 nls_cp850 4736 1 vfat 13760 1 fat 45120 1 vfat nls_iso8859-1 3904 3 ntfs 85932 2 supermount 37876 1 via-agp 7360 1 agpgart 31016 1 via-agp ppa 12296 0 parport_pc 32832 1 imm 12360 0 scsi_mod 114744 4 sg,sr_mod,ppa,imm parport 38952 4 lp,ppa,parport_pc,imm usblp 12256 0 ehci-hcd 24196 0 uhci-hcd 29104 0 usbcore 99132 6 hid,usblp,ehci-hcd,uhci-hcd rtc 11576 0 Also, Mozilla works fine when I su or change to root. But not otherwise. Thanks, Art Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.