Aliendrake
-
Posts
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Aliendrake
-
-
Mandrake Control Center uses XawTV dto scan channels, so that exactly what doesn't go furtheris the time when channels are supposed to be scanned
thanks,
SK
I have same problem. Any tv progam In linux works. Iam a linux newbie. I Though may be it s the bttv that I have to install. Or may be its allready in mandrak package.
I have mandrake 10.0 powerpack
Intel P4 200 MHZ
358 Ram
80 GB
Hauppauge Win Theater
Nvidia Geforce 3 TI500
Guys please help if you now what the problem is
-
I installed the 4.5.2 version and I get the same problem. Somebody has told me that I have to recmpile vmware. and I need to install gcc compiler. I installed the compller and I get this message
What is the location of the directory of C header files that match your running
kernel? [/usr/src/linux/include]
What does I need to fill in?
-
Here are some tips how to mount iso files to be used as " an medium" to load rpms automatic via software medium center. But I wonder was if there is a simpler way via gui.
-
-
What do I have to fill in the pathlist?
And second; can I do that with iso-images allso? Or is that different setup?
-
Hallo guys,
How can i add an local file to media sottware media manager? I have an file in my home dirrectory where I download rpm from the internet. And I would like to install the rpm directly from that file.
And I also want to put the mandrake cd-iso on the hard drive and use the software media manager to install it directly form the harddrive so i dont need to use cd ( cd deejee-ing ) every time when i install a new package.
Thanks,
Gregory
-
Where did you get the 4.5.1 (4.5.2)?
Thanks,
Gregory
-
Hallo, guys
I have an SCSI and IDE hard drive. I have linux installed on SCSI harddrive and I want to mount the second IDE harddrive as a storage disk.
Can somebody help me out
Thanks,
Gregory
-
The version that comes with mandrake 10.0 power pack ( version 4.0.5 )
-
I got this message trying to run vmware:
[gregory@localhost gregory]$ su
Password:
[root@localhost gregory]# vmware &
[1] 2621
[root@localhost gregory]# vmware-config.pl
Making sure VMware Workstation's services are stopped.
Stopping VMware services:
Virtual machine monitor [ OK ]
grep: /proc/ksyms: No such file or directory
grep: /proc/ksyms: No such file or directory
grep: /proc/ksyms: No such file or directory
Trying to find a suitable vmmon module for your running kernel.
None of VMware Workstation's pre-built vmmon modules is suitable for your
running kernel. Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes]
Can somebody help me with this problem?
Thanks,
Gregory
-
Hallo, if you use and buy mandrake 10.0 you do have the contibution and PLF. PLF are RPMS that you can download that are not supported in mandrake distributions because of legal proceses of copy rights. And contribution are rpm that you can download when you are a member of the mandrake club. If you buy mandrake from the store you get it included in the pack.
-
Hallo, Ixthusdan
Many but many thanks men, it works. I have done what your said and I got it work.
realy thanks,
Gregory.
-
Hallo,
Is there a simple manual how to use nvidia reinstaller or could you break it down in pieces?
Hey men, many thanks for your support, it has been an long way since.
Gregory
-
Yes. I saved the config-4. But after restart my computer I need to reconfig the nvdia driver again.
Thanks for repling xthusdan,
Gregory
-
I will try it when I go home.
Every time when I boot I have to go:
ESC->
linux 3->
username:->
password:->
su->
password:->
mc:->
etc/X11/XF86Config-4
F4->
change device: "nvidia" driver to "nv"
F2->
F10->
F10->
exit->
When I exit "su"mode and Iam in nomal user mode, then can I start X and login in to GUI.
But I want X to automaticly. When I do what you have what you have told me to do, change :id:3:initdefault: to :id:5:initdefault: will it then start the normal way?
Thanks,
Gregory
-
Hallo, guys
After I was able to start X. what should I do to make X. to start automaticly without going via console?
PS.
Yes, bvc, it was powerpack nvidia geforce 3 (generic) driver
-
Thanks to you all that have support me with this problem, I appreciate that alot.. After I have change the driver to " nv " I was able to start x and go into the GUI
Once again many thanks to you all
Gregory
-
I have change the driver to "nv" and than save it (F2) but after I save it it gives me "save as dialog box" and I tried to save it in the same file. It gives me a message that i cant save the file. What did I wrong?
Gregory
-
I tried to config /etc/x11/xf86config-4 file. When I use the command -> cd /etc
->cd /x11 it give me file do not exit. Can you show me how to configure the /etc/x11/XF86Config-4 file?
Thanks,
Gregory
-
Thank, finaly i can get a console to login, and can you explain step by step how to config te XF86Config-4 file. I have heard of vi but never used it. I am a newbie. Thanks I finaly see some progress.
Gregory
-
What should I do to go at init 1?
-
Yes, that is my situation. Every thing works fine (lilo) until when kde must begin to load, the monitor turns black. I have allready tried at lilo ESC -> linux splash=quit vga=normal and press enter but it do not work. Its like is BVC says: a G3TI-500 bugg.
Gregory
-
Yes your right. But now how should I do without a console? Schould I try installing via text install inplace of a gui install? You tell me I have no idea what to do.
Thanks, gregory
-
Yes, my system bootsup good but the gui (kde) wont start and my screen turns black. Also I do not get an console to try to start kde. I have an Nvidia geforce 3 Ti-500 64 mb.
Gregory
Can't scan TV Channels via Control center
in Software
Posted
The manual on the links was no so specific. A am a linux newbie