kyzzar
-
Posts
58 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by kyzzar
-
-
I am curious, why two interfaces? What else are you doing on your network with this machine?
Dear sir,
Beacause i want to share internet to other computer.
But Im trying to connect internet Im using the one lan card i put there the Static IP but nothing happen when i browse some address site.
I'll check my DSL modem or router but its working because i testing in microsoft windows the internet i can internet why in Mandrake the device is detected i mean the lan card...but always failed to connect internet...
my setup:
One telephone line
One DSL modem or router
One HUB (4 ports)
two network cable
______
| |----------->[HUB]------> COMPUTER
| DSL |
MODEM|
| |
---------
Please help me...
Thanks
Regards
Kyzzar
-
You appear to have 2 network cards defined - please post the output of
lsmod | grep natsemi lsmod | grep 8239too
This will tell us if the drivers are being loaded.
Then have a look at my howto at : My howto
Also look at the sticky post at the top of the networking forum
Chris
Dear all,
Goodmorning!!!
I type the code to the console and here the result...
[root@wizz root]# lsmod | grep natsemi
natsemi 23840 0
[root@wizz root]# lsmod | grep 8139
8139too 23712 0
mii 4992 1 8139too
youknow, yesterday someone teach me how to setup but he was dissapointed to work it.
always failed "Bringing uo interface eth0: Failed
"Brinigng upinterface eth1: Failed
Is it my hardware need a compatabily onmy system....
I always follow the intsuction but always failed toconnect....
Please help me...
Thanks
regards
Kyzzar
Dear all,
Once i type the MCC in the console and it will shows up to my screen the mandarke control center and i go to network & internet then new connection to put the Static IP address...then when i look the console i see something
like this:
[root@wizz root]# mcc
[root@wizz root]# error reading information on service tmdns : no such file or directory
error reading information on service zcip: no such file or directory
error reading information on service tmdns: no such file or directory
error reading information on service zcip: no such file or directory
error reading information on service tmdns: no such file or directory
error reading information on service zcip: no such file or directory
error reading information on service tmdns: no such file or directory
error reading information on service zcip: no such file or directory
shutting down loopback interface [ OK ]
Setting network parameters [ OK ]
Bringing up loopback inteface [ OK ]
Bringing up interface eth0 [ FAILED ]
Bringing up interface eth1 [ FAILED ]
I hope somebody encountered this problem....
Thanks
Regards
Kyzzar
-
You appear to have 2 network cards defined - please post the output of
lsmod | grep natsemi lsmod | grep 8239too
This will tell us if the drivers are being loaded.
Then have a look at my howto at : My howto
Also look at the sticky post at the top of the networking forum
Chris
Dear all,
Goodmorning!!!
I type the code to the console and here the result...
[root@wizz root]# lsmod | grep natsemi
natsemi 23840 0
[root@wizz root]# lsmod | grep 8139
8139too 23712 0
mii 4992 1 8139too
youknow, yesterday someone teach me how to setup but he was dissapointed to work it.
always failed "Bringing uo interface eth0: Failed
"Brinigng upinterface eth1: Failed
Is it my hardware need a compatabily onmy system....
I always follow the intsuction but always failed toconnect....
Please help me...
Thanks
regards
Kyzzar
-
I'm no networking expert, but here goes...
Look in /etc/sysconfig/network-scripts. There should be a file called ifcfg-eth0. Post the contents of that file.
Also, look in /etc/modules.conf. There should be a line like:
alias eth0 some_module_name
Let us know what the drivername is, and verify it's the correct module.
There are probably more files to look at, but this will make a start...
Dear Sleepyhead,
I follow your instruction...
I found only a ifcfg-lo...
but in th etc/modules.conf
i found the alias there
like this:
probeall scsi_hostadapter imm ppa
above snd-via82xx snd-pcm-oss
alias eth0 natsemi
alias sound-slot-0 snd-via82xx
alias eth1 8239too
what should i do...
regards
kyzzar
-
Mandrake Control Center is a poor instrument for setting up a network. Edit the files directly. Put your setup info here, and we will tell you what to put where.
Dear Sir,
I only put the IP to the Network & Internet then new connection....so
only that....
but once i restart it...
theres an error "falied".
what kind info you want to know...sorry for saying this I'am newbie in mandrake...
thanks
Regards
Kyzzar
-
Mandrake Control Center is a poor instrument for setting up a network. Edit the files directly. Put your setup info here, and we will tell you what to put where.
Dear sir,
I have an Static IP address that provide me of our ISP provider.
Please tell to me sir...i will give the info...
Thanks
Kyzzar
-
Dear All,
Good Morning!!!
I am using DSL connection with router provide of my ISP and also with a 4 ports HUB.
but I cant connect internet using Mandrake 10.0 Community
I always got notification " Bringing up interface eth0" has Falied
I'm doing many times to put the Static IP on the Mandrake Control center \
Network & Internet then New connection....
But always failed...
Please anybody know this....
Please I need your helpppp...
to work this properly...
Thanks
Regards
kyzzar
Moved by Ixthusdan
LAN Connection for Internet
in Networking
Posted
Dear Luis
The model is ZYXEL PRESTIGE 600 sEREIS
One port for Network cable one port for Telephone line plus the Ac voltages
and the name of our ISP is SUBIC TELECOMMUNICATIONS
Thanks
Regards\
Kyzzar