Jump to content

goto

Members
 View Profile  See their activity

  • Posts

    11

  • Joined

  • Last visited

 Content Type 

Posts posted by goto

  2. Leatek Winfast TV2000 Expert on Mandriva 2005LE

    in Hardware

    Posted

    Hi!

    I have an Leatek Winfast TV2000 Expert tuner and Mandriva 2005LE. But it didn't work. Have anyone same combination and it works? Or have you any trick for it?

    In MCC it appear like:

     

    Identification
Vendor: ?Hauppauge
Description: ?WinTV PCI card (88x chip based)
Media class: ?MULTIMEDIA_VIDEO
Connection
Bus: ?PCI
Bus PCI #: ?1
PCI device #: ?7
PCI function #: ?0
Vendor ID: ?5361
Device ID: ?34816
Sub vendor ID: ?4221
Sub device ID: ?26129
Misc
Module: ?cx8800

     

    With lspci -v :

    01:07.0 Multimedia video controller: Conexant CX22702 DVB-T 2k/8k (rev 0
       Subsystem: LeadTek Research Inc.: Unknown device 6611
       Flags: bus master, medium devsel, latency 32, IRQ 5
       Memory at ea000000 (32-bit, non-prefetchable) [size=16M]
       Capabilities: [44] Vital Product Data
       Capabilities: [4c] Power Management version 2

     

    Tvtime say that:

    tvtime
Running tvtime 0.99.
Reading configuration from /usr/local/etc/tvtime/tvtime.xml
Reading configuration from /home/vali/.tvtime/tvtime.xml
videoinput: Cannot open capture device /dev/video0: No such file or directory
Thank you for using tvtime.

     

    QTRadio say 

    Can't open device /dev/radio

     

    Observe that /dev/video0 and /dev/radio are missing.

     

    lsmod result:

    Module Size Used by
sg 34268 0
isofs 31512 1
fglrx 238908 7
md5 3648 1
ipv6 232320 8
raw 6720 1
snd-seq-dummy 2596 0
snd-seq-oss 31584 0
snd-seq-midi-event 6208 1 snd-seq-oss
snd-seq 47472 5 snd-seq-dummy,snd-seq-oss,snd-seq-midi-event
snd-seq-device 6796 3 snd-seq-dummy,snd-seq-oss,snd-seq
snd-pcm-oss 49056 0
snd-mixer-oss 17248 1 snd-pcm-oss
snd-intel8x0 29216 1
snd-ac97-codec 75256 1 snd-intel8x0
snd-pcm 80776 3 snd-pcm-oss,snd-intel8x0,snd-ac97-codec
snd-timer 20324 2 snd-seq,snd-pcm
snd-page-alloc 7588 2 snd-intel8x0,snd-pcm
snd 46980 11 snd-seq-oss,snd-seq,snd-seq-device,snd-pcm-oss,snd-mixer-oss,snd-intel8x0,snd-ac97-codec,
snd-pcm,snd-timer
soundcore 7104 1 snd
af_packet 16232 0
floppy 54736 0
video 13892 0
thermal 10600 0
tc1100-wmi 5188 0
processor 18164 1 thermal
fan 3108 0
container 3040 0
button 4880 0
battery 7460 0
ac 3300 0
3c59x 37256 0
mii 4224 1 3c59x
ide-cd 36772 1
loop 13544 0
nls_cp850 4544 3
vfat 11200 3
fat 35964 1 vfat
nls_iso8859-1 3744 7
ntfs 205368 3
supermount 32660 1
amd64-agp 9800 0
agpgart 28264 2 fglrx,amd64-agp
cx88xx 43284 0
i2c-algo-bit 8392 1 cx88xx
video-buf 16900 1 cx88xx
i2c-core 19028 2 cx88xx,i2c-algo-bit
v4l1-compat 13156 0
v4l2-common 4672 0
btcx-risc 3848 1 cx88xx
videodev 7264 1 cx88xx
tsdev 6016 0
evdev 7744 0
usbmouse 4640 0
usbhid 43712 0
ehci-hcd 28648 0
ohci-hcd 19112 0
usbcore 106008 5 usbmouse,usbhid,ehci-hcd,ohci-hcd
reiserfs 261012 2
sd_mod 15696 6
sata_nv 5764 5
libata 41316 1 sata_nv
scsi_mod 115144 3 sg,sd_mod,libata

     

    Also, dmesg:

    e00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 40000000:90000000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linux ro root=802 splash=silent
bootsplash: silent mode.
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1809.208 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034836k/1048512k available (2295k kernel code, 13056k reserved, 686k data, 264k init, 131008k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3579.90 BogoMIPS (lpj=1789952)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 0000000000000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000000 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 347k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xfb7f0, last bus=5
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1119193227.904:0): initialized
highmem bounce pool size: 64 pages
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 3750k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:5926
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 35024 bytes,<6>...found (800x600, 34976 bytes, v3).
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: HDS722512VLAT20, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: Host Protected Area detected.
current capacity is 234435439 sectors (120030 MB)
native capacity is 234441648 sectors (120034 MB)
hda: Host Protected Area disabled.
hda: 234441648 sectors (120034 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
ACPI wakeup devices:
HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
libata version 1.10 loaded.
sata_nv version 0.6
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE400 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE408 irq 23
ata1: dev 0 cfg 49:2f00 82:746b 83:7fe8 84:4023 85:7468 86:3c00 87:4023 88:203f
ata1: dev 0 ATA, max UDMA/100, 156310463 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/100
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156310463 512-byte hdwr sectors (80031 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156310463 512-byte hdwr sectors (80031 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 < p5 p6 p7 > p2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
Freeing unused kernel memory: 264k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 22, pci mem 0xed002000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:02.1: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: irq 21, pci mem 0xed003000
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-10: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [04b3:310b] on usb-0000:00:02.0-10
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
ts: Compaq touchscreen protocol output
Adding 530104k swap on /dev/sda5. Priority:-1 extents:1
Linux video capture interface: v1.00
cx8800: Unknown parameter `gbuffers'
Linux agpgart interface v0.100 © Dave Jones
ntfs: Ignoring new-style parameters in presence of obsolete ones
NTFS driver 2.1.22 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
Supermount version 2.0.4 for kernel 2.6
NTFS volume version 3.1.
NTFS volume version 3.1.
loop: loaded (max 8 devices)
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 16 (level, low) -> IRQ 16
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:08.0: 3Com PCI 3c905C Tornado at 0xa000. Vers LK1.1.19
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports 8 throttling states)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 49721 usecs
intel8x0: clocking to 46796
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03b26e0(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device f7adc800(sit0)
fglrx: module license 'Proprietary. © 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[fglrx] module loaded - fglrx 8.14.13 [Jun 8 2005] on minor 0
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
[fglrx] free PCIe = 54804480
[fglrx] max PCIe = 54804480
[fglrx] free LFB = 122613760
[fglrx] max LFB = 122613760
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
eth0: no IPv6 routers present

     

    Content of /etc/modprobe.conf:

    alias eth0 3c59x
alias sound-slot-0 snd-intel8x0
install scsi_hostadapter /sbin/modprobe sata_nv; /bin/true
remove snd-intel8x0 /sbin/modprobe -r snd-pcm-oss; /sbin/modprobe --first-time -r --ignore-remove snd-intel8x0
install snd-intel8x0 /sbin/modprobe --first-time --ignore-install snd-intel8x0 && { /sbin/modprobe snd-pcm-oss; /bin/true;}
install usb-interface /sbin/modprobe ohci-hcd; /sbin/modprobe ehci-hcd; /bin/true
options cx8800 gbuffers=4

     

    My PC contain: Gigabyte ga-k8nf9 (nforce4-4x chip) motherboard, AMD 64 3000+ proccessor, 2x512 RAM, ATI x600 with 128 MB video, 120GB PATA, 80 GB SATA (on this is Mandriva), Leatek Winfast TV2000 Expert tuner, 3com NIC.

     

    PS: sorry for my "english language" and for this long post.

  4. 10.1 and pcie

    in Installing Mandriva

    Posted

    Tip: when you buy a new PC buy one with a Nvidia card :)

     

    http://mandrakeusers.org/index.php?showtopic=19952

     

    What goes wrong? What errors do you get? What have you tried yourself?

     

    i run the driver from ati with rpm -Uh fglrx......, fglrxconfig works fine...but at startx kde don't start. but now work XFdrake - radeon (fglrx) :banana: .

     

    [vali@Goto vali]$ fglrxinfo

    libGL error: drmMap of framebuffer failed

    display: :0.0 screen: 0

    OpenGL vendor string: Mesa project: www.mesa3d.org

    OpenGL renderer string: Mesa GLX Indirect

    OpenGL version string: 1.2 (1.4 Mesa 5.0.2)

     

    [vali@Goto vali]$ fgl_glxgears

    libGL error: drmMap of framebuffer failed

    Error: couldn't get fbconfig

     

    i put an atachment with my Xorg.0.log

  5. 10.1 and pcie

    in Installing Mandriva

    Posted · Edited by goto

    hi!

    recently i buy a new pc: cpu amd 64 3000+ 939, mb gigabyte k8nf9 4x (nforce4 chipset), pcie gigabyte radeon x9600, 2x512mb pc2700, hdd ide 120gb (is from the old system), hlds combo.

    i install mdk 10.1, both x86 and x84_64. the problem is that my video use vesa driver. i try to install drivers from ati site but don't work. i think is a kernel problem.

    plz, whitch options may activate on kernel to get support for my pc?

     

    Later edit: in x86_64, when i modify the clock at shutdown say something like it can't modify something in any modes it know (i will note exactly what it say) and the clock is say still unmodificate hour.

  7. Philips sound card

    in Hardware

    Posted

    yes, i try it: modprobe snd_emu10k1 . no result.

    i have i friend who have Philips PSC 605 (mine is psc 705) and his card use snd_cmipci module. i try this module at me and no result.

    also, in harddrake2 at sound - thunderbird in run config tools option doesn,t run anything.

  11. Share tunner fm

    in Networking

    Posted · Edited by goto

    Hi!

    I have a Gem Tek Tunner FM on MDK 10. I want to share it in lan so my friends listen radio. I am a newbie in linux, so please help me: how ? :help::help:

    So, i need software and tips&tricks to setting it.

    ps: please scuse my english

×
×
  • Create New...