creekpeople

Thanks a lot! I'm traveling at the moment, so it won't be until the end of the month before I'll be home to test it, but it seems quite promising. So for the moment, I'm going to mark this as solved. Greetings to all of you! Thanks for the help!

Hi Peryt Which code are you referring to? Could you post it once again? Thanks, creek

I'm not an expert on cameras but is there native support for that camera? Or do you have to install a driver? Hence: Did you try to install the driver, for there's a dkms-qc-usb-messenger package in the repos... (I had lots of problems with my webcam, but recompiling kernels sounds a bit exaggerated) If you have that driver, maybe try re-installing it. Or check, if all programs respond in the same way... creek

Thanks for looking it through nonetheless, it's not a big problem, I was just wondering if it was possible to make it work. Maybe someone will come up with a solution someday. Merry Christmas in any case. creek

Thank you, Yves, I must admit that I will need your help if this will really go this deep. Anyway, the drive is connected via USB. Here's what I get for lshal | grep usb I'll post the output I get and hope that you can make something out of it. To be frank, this exceeds my semi-noob-linux-knowledge. lshal | grep usb udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3' info.linux.driver = 'usb' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3' (string) linux.device_file = '/dev/bus/usb/001/001' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 6 (0x6) (int) usb_device.product = 'EHCI Host Controller' (string) usb_device.product_id = 2 (0x2) (int) usb_device.serial = '0000:00:03.3' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Linux 2.6.27.5-desktop-2mnb ehci_hcd' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ' (string) linux.device_file = '/dev/bus/usb/001/005' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 293 (0x125) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 5 (0x5) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-1' (string) usb_device.max_power = 2 (0x2) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'OneTouch' (string) usb_device.product_id = 29456 (0x7310) (int) usb_device.serial = '2HA259WZ' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Maxtor' (string) usb_device.vendor_id = 3401 (0xd49) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_usbraw' info.capabilities = {'usbraw'} (string list) info.category = 'usbraw' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_usbraw' (string) linux.device_file = '/dev/usbdev1.5' (string) linux.subsystem = 'usb_device' (string) linux.sysfs_path = '/sys/class/usb_device/usbdev1.5' (string) usbraw.device = '/dev/usbdev1.5' (string) udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0' info.linux.driver = 'usb-storage' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-1/1-1:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 293 (0x125) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 5 (0x5) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-1/1-1:1.0' (string) usb.max_power = 2 (0x2) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Mass Storage Interface' (string) usb.product_id = 29456 (0x7310) (int) usb.serial = '2HA259WZ' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Maxtor' (string) usb.vendor_id = 3401 (0xd49) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0_scsi_host' info.parent = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0_scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-1/1-1:1.0/host4' (string) udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0_scsi_host_scsi_device_lun0' info.parent = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0_scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0_scsi_host_scsi_device_lun0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-1/1-1:1.0/host4/target4:0:0/4:0:0:0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0_scsi_host_scsi_device_lun0' (string) storage.bus = 'usb' (string) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0_scsi_host_scsi_device_lun0_scsi_generic' info.parent = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0_scsi_host_scsi_device_lun0' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_d49_7310_2HA259WZ_if0_scsi_host_scsi_device_lun0_scsi_generic' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3_usbraw' info.capabilities = {'usbraw'} (string list) info.category = 'usbraw' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3_usbraw' (string) linux.device_file = '/dev/usbdev1.1' (string) linux.subsystem = 'usb_device' (string) linux.sysfs_path = '/sys/class/usb_device/usbdev1.1' (string) usbraw.device = '/dev/usbdev1.1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105' (string) linux.device_file = '/dev/bus/usb/001/004' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-5' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 272 (0x110) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 4 (0x4) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-5' (string) usb_device.max_power = 200 (0xc8) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'DataTraveler 2.0' (string) usb_device.product_id = 25925 (0x6545) (int) usb_device.serial = '5B8309000105' (string) usb_device.speed = 480.0 (480) (double) usb_device.vendor = 'Toshiba Corp.' (string) usb_device.vendor_id = 2352 (0x930) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_usbraw' info.capabilities = {'usbraw'} (string list) info.category = 'usbraw' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_usbraw' (string) linux.device_file = '/dev/usbdev1.4' (string) linux.subsystem = 'usb_device' (string) linux.sysfs_path = '/sys/class/usb_device/usbdev1.4' (string) usbraw.device = '/dev/usbdev1.4' (string) udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0' info.linux.driver = 'usb-storage' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 272 (0x110) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 4 (0x4) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0' (string) usb.max_power = 200 (0xc8) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Mass Storage Interface' (string) usb.product_id = 25925 (0x6545) (int) usb.serial = '5B8309000105' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Toshiba Corp.' (string) usb.vendor_id = 2352 (0x930) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0_scsi_host' info.parent = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0_scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/host3' (string) udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0_scsi_host_scsi_device_lun0' info.parent = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0_scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0_scsi_host_scsi_device_lun0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0_scsi_host_scsi_device_lun0' (string) storage.bus = 'usb' (string) storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0_scsi_host_scsi_device_lun0_scsi_generic' info.parent = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0_scsi_host_scsi_device_lun0' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_930_6545_5B8309000105_if0_scsi_host_scsi_device_lun0_scsi_generic' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_03_3_if0' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 6 (0x6) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 2 (0x2) (int) usb.serial = '0000:00:03.3' (string) usb.speed = 480.0 (480) (double) usb.vendor = 'Linux 2.6.27.5-desktop-2mnb ehci_hcd' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_2' info.linux.driver = 'usb' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_2' (string) linux.device_file = '/dev/bus/usb/004/001' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4' (string) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'OHCI Host Controller' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:03.2' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux 2.6.27.5-desktop-2mnb ohci_hcd' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_2_usbraw' info.capabilities = {'usbraw'} (string list) info.category = 'usbraw' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_2' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_2_usbraw' (string) linux.device_file = '/dev/usbdev4.1' (string) linux.subsystem = 'usb_device' (string) linux.sysfs_path = '/sys/class/usb_device/usbdev4.1' (string) usbraw.device = '/dev/usbdev4.1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_2_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_2' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_2_if0' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:03.2' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux 2.6.27.5-desktop-2mnb ohci_hcd' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1' info.linux.driver = 'usb' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1' (string) linux.device_file = '/dev/bus/usb/003/001' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3' (string) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'OHCI Host Controller' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:03.1' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux 2.6.27.5-desktop-2mnb ohci_hcd' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1_usbraw' info.capabilities = {'usbraw'} (string list) info.category = 'usbraw' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1_usbraw' (string) linux.device_file = '/dev/usbdev3.1' (string) linux.subsystem = 'usb_device' (string) linux.sysfs_path = '/sys/class/usb_device/usbdev3.1' (string) usbraw.device = '/dev/usbdev3.1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_1_if0' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:03.1' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux 2.6.27.5-desktop-2mnb ohci_hcd' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0' info.linux.driver = 'usb' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0' (string) linux.device_file = '/dev/bus/usb/002/001' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2' (string) usb_device.max_power = 0 (0x0) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.product = 'OHCI Host Controller' (string) usb_device.product_id = 1 (0x1) (int) usb_device.serial = '0000:00:03.0' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Linux 2.6.27.5-desktop-2mnb ohci_hcd' (string) usb_device.vendor_id = 7531 (0x1d6b) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0_usbraw' info.capabilities = {'usbraw'} (string list) info.category = 'usbraw' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0_usbraw' (string) linux.device_file = '/dev/usbdev2.1' (string) linux.subsystem = 'usb_device' (string) linux.sysfs_path = '/sys/class/usb_device/usbdev2.1' (string) usbraw.device = '/dev/usbdev2.1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial' (string) linux.device_file = '/dev/bus/usb/002/002' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2' (string) usb_device.bus_number = 2 (0x2) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 255 (0xff) (int) usb_device.device_protocol = 255 (0xff) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 255 (0xff) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2' (string) usb_device.max_power = 500 (0x1f4) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Easy Snap Snake Eye WebCam' (string) usb_device.product_id = 9320 (0x2468) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'Pixart Imaging, Inc.' (string) usb_device.vendor_id = 2362 (0x93a) (int) usb_device.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial_video4linux' info.parent = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial_video4linux' (string) udi = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial_usbraw' info.capabilities = {'usbraw'} (string list) info.category = 'usbraw' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial_usbraw' (string) linux.device_file = '/dev/usbdev2.2' (string) linux.subsystem = 'usb_device' (string) linux.sysfs_path = '/sys/class/usb_device/usbdev2.2' (string) usbraw.device = '/dev/usbdev2.2' (string) udi = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_93a_2468_noserial_if0' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 255 (0xff) (int) usb.device_protocol = 255 (0xff) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.device_subclass = 255 (0xff) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 255 (0xff) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 2 (0x2) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0' (string) usb.max_power = 500 (0x1f4) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Vendor Specific Interface' (string) usb.product_id = 9320 (0x2468) (int) usb.speed = 12.0 (12) (double) usb.vendor = 'Pixart Imaging, Inc.' (string) usb.vendor_id = 2362 (0x93a) (int) usb.version = 1.1 (1.1) (double) udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0_if0' info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0_if0' (string) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int) usb.can_wake_up = true (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 518 (0x206) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.is_self_powered = true (bool) usb.linux.device_number = 1 (0x1) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 2 (0x2) (int) usb.product = 'USB Hub Interface' (string) usb.product_id = 1 (0x1) (int) usb.serial = '0000:00:03.0' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'Linux 2.6.27.5-desktop-2mnb ohci_hcd' (string) usb.vendor_id = 7531 (0x1d6b) (int) usb.version = 1.1 (1.1) (double) Here's the output to lshal, at least the part that I could relate to the Maxtor drive. lshal udi = '/org/freedesktop/Hal/devices/pci_1039_5513_scsi_host_scsi_device_lun0_0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1039_5513_scsi_host' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1039_5513_scsi_host_scsi_device_lun0_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.5/host0/target0:0:1/0:0:1:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'Maxtor 4D080K4' (string) scsi.target = 1 (0x1) (int) scsi.type = 'disk' (string) scsi.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_4D080K4_D4H2FV3E' block.device = '/dev/sdb' (string) block.is_volume = false (bool) block.major = 8 (0x8) (int) block.minor = 16 (0x10) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_4D080K4_D4H2FV3E' (string) info.capabilities = {'storage', 'block'} (string list) info.category = 'storage' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1039_5513_scsi_host_scsi_device_lun0_0' (string) info.product = 'Maxtor 4D080K4' (string) info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_4D080K4_D4H2FV3E' (string) info.vendor = 'ATA' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sdb' (string) storage.automount_enabled_hint = true (bool) storage.bus = 'scsi' (string) storage.drive_type = 'disk' (string) storage.firmware_version = 'DAH0' (string) storage.hotpluggable = false (bool) storage.lun = 0 (0x0) (int) storage.media_check_enabled = false (bool) storage.model = 'Maxtor 4D080K4' (string) storage.no_partitions_hint = false (bool) storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string) storage.removable = false (bool) storage.removable.media_available = true (bool) storage.removable.media_size = 33820286976 (0x7dfd8a000) (uint64) storage.requires_eject = false (bool) storage.serial = 'SATA_Maxtor_4D080K4_D4H2FV3E' (string) storage.size = 33820286976 (0x7dfd8a000) (uint64) storage.vendor = 'ATA' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_CCD86E2DD86E164C' block.device = '/dev/sdb1' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 17 (0x11) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_4D080K4_D4H2FV3E' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_4D080K4_D4H2FV3E' (string) info.product = 'Volume (ntfs)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_CCD86E2DD86E164C' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sdb/sdb1' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'ntfs' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = '3.1' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list) volume.mount_point = '' (string) volume.num_blocks = 41222727 (0x2750247) (int) volume.partition.flags = {'boot'} (string list) volume.partition.label = '' (string) volume.partition.media_size = 33820286976 (0x7dfd8a000) (uint64) volume.partition.number = 1 (0x1) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 32256 (0x7e00) (uint64) volume.partition.type = '0x07' (string) volume.partition.uuid = '' (string) volume.size = 21106036224 (0x4ea048e00) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = 'CCD86E2DD86E164C' (string) udi = '/org/freedesktop/Hal/devices/volume_uuid_491D_82F2' block.device = '/dev/sdb5' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 21 (0x15) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_4D080K4_D4H2FV3E' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_4D080K4_D4H2FV3E' (string) info.product = 'Volume (vfat)' (string) info.udi = '/org/freedesktop/Hal/devices/volume_uuid_491D_82F2' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sdb/sdb5' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = 'vfat' (string) volume.fsusage = 'filesystem' (string) volume.fsversion = 'FAT32' (string) volume.ignore = false (bool) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush'} (string list) volume.mount_point = '' (string) volume.num_blocks = 118848807 (0x7157d27) (int) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 33820286976 (0x7dfd8a000) (uint64) volume.partition.number = 5 (0x5) (int) volume.partition.scheme = 'embr' (string) volume.partition.start = 21106100736 (0x4ea058a00) (uint64) volume.partition.type = '0x0b' (string) volume.partition.uuid = '' (string) volume.size = 60850589184 (0xe2afa4e00) (uint64) volume.unmount.valid_options = {'lazy'} (string list) volume.uuid = '491D-82F2' (string) udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024_0' block.device = '/dev/sdb2' (string) block.is_volume = true (bool) block.major = 8 (0x8) (int) block.minor = 18 (0x12) (int) block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_4D080K4_D4H2FV3E' (string) info.capabilities = {'volume', 'block'} (string list) info.category = 'volume' (string) info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_4D080K4_D4H2FV3E' (string) info.product = 'Volume' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024_0' (string) linux.hotplug_type = 3 (0x3) (int) linux.sysfs_path = '/sys/block/sdb/sdb2' (string) storage.model = '' (string) volume.block_size = 512 (0x200) (int) volume.fstype = '' (string) volume.fsusage = 'partitiontable' (string) volume.fsversion = '' (string) volume.is_disc = false (bool) volume.is_mounted = false (bool) volume.is_mounted_read_only = false (bool) volume.is_partition = true (bool) volume.label = '' (string) volume.linux.is_device_mapper = false (bool) volume.mount_point = '' (string) volume.num_blocks = 2 (0x2) (int) volume.partition.flags = {} (string list) volume.partition.label = '' (string) volume.partition.media_size = 33820286976 (0x7dfd8a000) (uint64) volume.partition.number = 2 (0x2) (int) volume.partition.scheme = 'mbr' (string) volume.partition.start = 21106068480 (0x4ea050c00) (uint64) volume.partition.type = '0x05' (string) volume.partition.uuid = '' (string) volume.size = 1024 (0x400) (uint64) volume.uuid = '' (string) thanks again

Hello I recently bought a Maxtor OneTouch 4 (500G) external Harddisk. I have reformatted the drive to ext3. Yet I was wondering if there was a way to make the onetouch-button work under Linux. Under Windows, that button sets off a backup-process. I found some Information on the internet according to which support for that button had been added to the kernel. Nonetheless, when I press the button, nothing happens. If anyone has experience with that drive, I'd be happy if you shared it. (Btw: I'm using Mandriva 2009 with kernel 2.6.27.5-desktop-2mnb) Thanks a lot! creek

I just installed Kerry again. And well, it does what it is supposed to do. Still, all this gives me a feeling of defeat. I cannot understand why all release notes boast about the wonders of the semantic desktop and about strigi's implementation. Obviously it is incomplete, or, let's say impossible to use (at least for me). If any of you comes across a solution, I would still be glad to hear about it. I can't imagine that strigi's there for nothing. Greetings!

Thank you, I was able to start that program and it has a search mask at the bottom of its window, but when I throw search terms at it, it doesn't return any results. I tested that on two computers (desktop and laptop). Strigi returned a message that indexing was completed, so I don't get it anymore. Is there anything else I am supposed to do? And another question: If KDE4 introduced strigi as its new search engine, why isn't there any search bar in dolphin, kickoff or whoknowswhere? Anyway, thanks for your help Ian, especially for the urpmq-command I was unaware of before.

Thanks, but I already tried to install all the packages I could find that are related to strigi. Amongst other things, I also installed the package strigi-gui (which seemed promising). Nonetheless I can't find anything in the kickoff-menu or in the program-starter (alt-F2) after installation. I couldn't find any othe rpms that seemed fitting. But maybe I have a necessary repository missing. The rpm I used was release 2mdv2009.0 version 0.5.11. Any idea is appreciated. Thank you very much!

Hello John, could you explain it again here? I can't figure out how to use the desktop search neither, and I don't know what other post you are refering to. I already spent some time searching for an answer but so far this post here was the only thing I came across. Thanks a lot creekpeople