photoworks

Does not work.

in failsafe when i type init3, it tells me invalid command.

I decided to upgrade from 10.0 official to 10.1 community.

Now when i want to boot and i reach the login screen before entering in Kde, i enter my pasword. it starts to load and then does not complete the loading.

any idea why ?

One more question, is it safe to install from the 10.1 community or should i wait fr the official 10.1 verion ?

is there a list of hardware supported for 10.1, available ?

I installed Mandrake 10.0 a few month ago and i would like to know how can i upgrade to version 10.1. Is it Possible ? Are There any issues ?

it works for me .. i did not have any Problems with the sound. just tell me if you have already installed ( Mozplugger ) or not. If not then try to install it and i am sure it will work for you. You should either install Mozplugger or Mplayer Plugins for Mozilla. And everything should work well after that.

 

 

FreeEagle

<{POST_SNAPBACK}>

will it work if i play a quicktime movie out ot the navigator, i am talking about a quicktime trailer i would play in Vlan or Totem after having downloaded it on my computer.

When i play quicktime trailers like this one for example :

http://pdl.warnerbros.com/wbmovies/alexand...teaser_hi_a.mov

i do not have any sound.

Any idea why ?

it i the same whether i use VLan or Totem program.

i was wondering if there are tools for mandrake such as disk defragmenter or disk cleanup?

Do i need to defragment linux or is it not necessary ?

You might want to check the method of delivery in that file. If its set to smtp.blabla try deliver directly.

<{POST_SNAPBACK}>

where do i check the method of delivery ?

yes it is pwks.no-ip.org

does anyone knows where can i find gimp2_0 for mandrake 10.0.

i looked on the mandrake website and i see it is available in the cd from the powerpack edition.

Unfortunately i only have discovery edition.

Is there any mirror somewhere where i can download it ?

[it tells me the emails have been deffered, denied by pwks.no-p.org.

<{POST_SNAPBACK}>

?? Who are they?

<{POST_SNAPBACK}>

it is my dns web redirection

Sorry, I don't have any experience with sendmail.

 

Just out of  curiousity, why did you pick sendmail, rather than the standards, like Evolution and kmail?

<{POST_SNAPBACK}>

well i have a website with a forum hosted on my machine for test i i wanted to test the automatic password reminder sent by email for users.

when i test it, the email is not sent. and when i look into sendmail, it tells me the emails have been deffered, denied by pwks.no-p.org. So once agan, there must be a setting that i am not making right...

Please help, how do i configure Sendmail.

I think this is a NAT issue. I don't know exactly why but I know that this is not an apache specific thing if you can access the server from an xy pc with no problem. Somewhere I read that you can't access your server's WAN IP from your LAN.

<{POST_SNAPBACK}>

 

that depends on your router really... (some, probably cheaper ones, don't like forwaring the packet that has come from inside the network back inside the network using the port forwarding rules.)

 

photoworks, a cheap trick to make it work would be to edit the /etc/hosts file, adding pwks.no-ip.org after localhost on the 127.0.0.1 line.

<{POST_SNAPBACK}>

i edited the files and now it works fine, i can have access to my server by entering my address : http://pwks.no-ip.org/

i really don't know what is happenning on my system, but some weird thins happened. I noticed that the protection was high, so i dowgraded the protection to standard and then the internet connection was accesssible again ( though in the panel "internet connection", the connection "lan" is on status not connected".

I then upgraded again to high. The connection still works (thou, once again in the panel "internet connection", the connection "lan" is on status not connected.

my network card is recognized properly.

ifconfig eth0 output is :

eth0 Link encap:Ethernet HWaddr 00:08:74:97:18:AE

inet addr:192.168.2.7 Bcast:255.255.255.255 Mask:255.255.255.0

inet6 addr: fe80::208:74ff:fe97:18ae/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:4 errors:0 dropped:0 overruns:0 frame:0

TX packets:9 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:818 (818.0 B) TX bytes:948 (948.0 B)

Interrupt:11 Base address:0xec80

ifconfig-eth0 file is :

DEVICE=eth0

BOOTPROTO=dhcp

NETMASK=255.255.255.0

ONBOOT=yes

HWADDR=00:08:74:97:18:ae

MII_NOT_SUPPORTED=yes

WIRELESS_ENC_KEY=""

NEEDHOSTNAME=yes

today, when i try to access to the internet, it tells me that the connection is down and that i need to configure it.

the last time i tried (two days ago) i was able to get to the internet. I did not change anything and nmy ethernet card is ok at boot.

i tried to reach my rooter at http://192.168.2.1:88/ but i can't even reach it.

i tried ifup eth0 <enter> in the console as root and i get this message :

Determining IP information for eth0... Done.

As i have dual boot, i boot into windows and there my internet connection works.

Like Michel said - What email client are you using?.  Mkd 10 is pretty easy to set up, and while webmin is extremely usefull, you shouldn't need it for this (although it is good to have)

<{POST_SNAPBACK}>

well i installed sendmail.

but i don't know how to launch it.

i went to the webmin and i saw it there, though i ihave no idea how to set it up.

where do you find /etc/hosts file ? Do they have specfic names ?

Does anyone knows how to configure a mail server in mandrake 10.0. is there any tutorial and which tools needs to be installed.

:unsure:

where on apache can i change the settings in order to access to my server from both local and outside ?

currently, when i type http://pwks.no-ip.org/ from my machine it does not work. i have to type http://localhost/

from another computer, by entering the http://www.pwks.no-ip.org/ i have no problem accessing the server.

Does anyone have an idea how to fix that issue ????

:unsure:

Is there not anyone to help me ???????

i have installed apache on my machine and i have setup my server.

i have put several websites in the following folder : file:/var/www/html

in local, when i type http://localhost/fashionbug/forum or http://localhost/photoworks or http://localhost/lazhar or http://localhost/greece (those are the different website i have on local), everyone of those link works

now, when i try to access the websites from outside, i encounter problems :

when i type http://82.0.59.93/fashionbug/ , i can access to the page.

However, when i type http://82.0.59.93/fashionbug/forum/

or

http://82.0.59.93/photoworks/

or

http://82.0.59.93/greece/

or

http://82.0.59.93/lazhar/

it does not work.

In order to work i have to add foreach specific website its homepage file, like that :

http://82.0.59.93/fashionbug/forum/list.php?f=1

or

http://82.0.59.93/photoworks/index.htm

or

http://82.0.59.93/greece/index.htm

or

http://82.0.59.93/lazhar/index.html

Does anyone know what settings are wrong on ????

Does anyone knows if there is a version or an equivalent of easyphp under Linux Mandrake