kieren

Ok, this file seems fairly long. I have no idea which part(s) you need to see so I'll post all: Xorg.conf: # File: xorg.conf # File generated by fglrxconfig © ATI Technologies, a substitute for xf86config. # Note by ATI: the below copyright notice is there for servicing possibly # pending third party rights on the file format and the instance of this file. # # Copyright © 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # DRI Section # ********************************************************************** Section "dri" # Access to OpenGL ICD is allowed for all users: Mode 0666 # Access to OpenGL ICD is restricted to a specific user group: # Group 100 # users # Mode 0660 EndSection # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # This loads the GLX module Load "glx" # libglx.a Load "dri" # libdri.a EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "kbd" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" Option "XkbModel" "pc101" Option "XkbLayout" "gb" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "ImPS/2" Option "ZAxisMapping" "4 5" Option "Device" "/dev/input/mice" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Monitor0" # === mode lines based on GTF === # VGA @ 100Hz # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync # SVGA @ 100Hz # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync # XVGA @ 100Hz # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync # 1152x864 @ 60Hz # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync # 1152x864 @ 85Hz # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync # 1152x864 @ 100Hz # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync # 1280x960 @ 75Hz # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync # 1280x960 @ 100Hz # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync # SXGA @ 100Hz # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync # SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz # Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync # 1600x1000 @ 60Hz # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync # 1600x1000 @ 75Hz # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync # 1600x1000 @ 85Hz # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync # 1600x1000 @ 100Hz # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync # 1600x1024 @ 60Hz # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync # 1600x1024 @ 75Hz # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync # 1600x1024 @ 76Hz # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync # 1600x1024 @ 85Hz # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync # 1920x1080 @ 60Hz # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync # 1920x1080 @ 75Hz # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync # 1920x1200 @ 60Hz # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync # 1920x1200 @ 75Hz # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync # 2048x1536 @ 60 # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync # 2048x1536 @ 60 # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync # 1400x1050 @ 60Hz M9 Laptop mode # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # installed. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # === ATI device section === Section "Device" Identifier "ATI Graphics Adapter" Driver "fglrx" # ### generic DRI settings ### # === disable PnP Monitor === #Option "NoDDC" # === disable/enable XAA/DRI === Option "no_accel" "no" Option "no_dri" "no" # === misc DRI settings === Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr # ### FireGL DDX driver module specific settings ### # === Screen Management === Option "DesktopSetup" "(null)" Option "ScreenOverlap" "0" Option "GammaCorrectionI" "0x00000000" Option "GammaCorrectionII" "0x00000000" # === OpenGL specific profiles/settings === Option "Capabilities" "0x00000000" Option "CapabilitiesEx" "0x00000000" # === Video Overlay for the Xv extension === Option "VideoOverlay" "on" # === OpenGL Overlay === # Note: When OpenGL Overlay is enabled, Video Overlay # will be disabled automatically Option "OpenGLOverlay" "off" # === Center Mode (Laptops only) === Option "CenterMode" "off" # === Pseudo Color Visuals (8-bit visuals) === Option "PseudoColorVisuals" "off" # === QBS Management === Option "Stereo" "off" Option "StereoSyncEnable" "1" # === FSAA Management === Option "FSAAEnable" "no" Option "FSAAScale" "1" Option "FSAADisableGamma" "no" Option "FSAACustomizeMSPos" "no" Option "FSAAMSPosX0" "0.000000" Option "FSAAMSPosY0" "0.000000" Option "FSAAMSPosX1" "0.000000" Option "FSAAMSPosY1" "0.000000" Option "FSAAMSPosX2" "0.000000" Option "FSAAMSPosY2" "0.000000" Option "FSAAMSPosX3" "0.000000" Option "FSAAMSPosY3" "0.000000" Option "FSAAMSPosX4" "0.000000" Option "FSAAMSPosY4" "0.000000" Option "FSAAMSPosX5" "0.000000" Option "FSAAMSPosY5" "0.000000" # === Misc Options === Option "UseFastTLS" "2" Option "BlockSignalsOnLock" "on" Option "UseInternalAGPGART" "yes" Option "ForceGenericCPU" "no" BusID "PCI:2:0:0" # vendor=1002, device=4e45 Screen 0 EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen0" Device "ATI Graphics Adapter" Monitor "Monitor0" DefaultDepth 24 #Option "backingstore" Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 # initial origin if mode is smaller than desktop # Virtual 1280 1024 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Server Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. Screen "Screen0" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection ### EOF ### Xorg.0.log: X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.10-3mdksmp i686 [ELF] Current Operating System: Linux localhost 2.6.11-6mdk #1 Tue Mar 22 16:04:32 CET 2005 i686 Build Date: 06 April 2005 Before reporting problems, check [url="http://wiki.X.Org"]http://wiki.X.Org[/url] to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 16 19:34:11 2005 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Server Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "ATI Graphics Adapter" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled, /usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (II) Open APM successful (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 Using vt 7 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,01e0 card 0000,0000 rev c1 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 10de,01eb card 10de,0c17 rev c1 class 05,00,00 hdr 80 (II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev c1 class 05,00,00 hdr 80 (II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev c1 class 05,00,00 hdr 80 (II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev c1 class 05,00,00 hdr 80 (II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev c1 class 05,00,00 hdr 80 (II) PCI: 00:01:0: chip 10de,0060 card 1458,0c11 rev a4 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0064 card 1458,0c11 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,0067 card 1458,5004 rev a4 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,0067 card 1458,5004 rev a4 class 0c,03,10 hdr 80 (II) PCI: 00:02:2: chip 10de,0068 card 1458,5004 rev a4 class 0c,03,20 hdr 80 (II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:09:0: chip 10de,0065 card 1458,5002 rev a2 class 01,01,8a hdr 00 (II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01 (II) PCI: 01:0a:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80 (II) PCI: 01:0a:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80 (II) PCI: 01:0a:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80 (II) PCI: 01:0b:0: chip 10ec,8169 card 1458,e000 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:0e:0: chip 104c,8024 card 1458,1000 rev 00 class 0c,00,10 hdr 00 (II) PCI: 02:00:0: chip 1002,4e45 card 1002,0002 rev 00 class 03,00,00 hdr 80 (II) PCI: 02:00:1: chip 1002,4e65 card 1002,0003 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x00009000 - 0x0000afff (0x2000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe6000000 - 0xe7ffffff (0x2000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set) (II) Bus 2 I/O range: [0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] (--) PCI:*(2:0:0) ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro] rev 0, Mem @ 0xd0000000/27, 0xe5000000/16, I/O @ 0xb000/8 (--) PCI: (2:0:1) ATI Technologies Inc Radeon R300 [Radeon 9500 Pro] (Secondary) rev 0, Mem @ 0xd8000000/27, 0xe5010000/16 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff (II) Active PCI resource ranges: [0] -1 0 0xe7004000 - 0xe7007fff (0x4000) MX[B] [1] -1 0 0xe7009000 - 0xe70097ff (0x800) MX[B] [2] -1 0 0xe700a000 - 0xe700a0ff (0x100) MX[B] [3] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B] [4] -1 0 0xe7008000 - 0xe70087ff (0x800) MX[B] [5] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B] [6] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B] [7] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B] [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [9] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B) [10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [11] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B) [12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [13] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] [14] -1 0 0x00009400 - 0x00009407 (0x8) IX[B] [15] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] [16] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [17] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [18] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xe7004000 - 0xe7007fff (0x4000) MX[B] [1] -1 0 0xe7009000 - 0xe70097ff (0x800) MX[B] [2] -1 0 0xe700a000 - 0xe700a0ff (0x100) MX[B] [3] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B] [4] -1 0 0xe7008000 - 0xe70087ff (0x800) MX[B] [5] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B] [6] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B] [7] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B] [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [9] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B) [10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [11] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B) [12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [13] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] [14] -1 0 0x00009400 - 0x00009407 (0x8) IX[B] [15] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] [16] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [17] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [18] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe7004000 - 0xe7007fff (0x4000) MX[B] [6] -1 0 0xe7009000 - 0xe70097ff (0x800) MX[B] [7] -1 0 0xe700a000 - 0xe700a0ff (0x100) MX[B] [8] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B] [9] -1 0 0xe7008000 - 0xe70087ff (0x800) MX[B] [10] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B] [11] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B] [12] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B] [13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B) [15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [16] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B) [17] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] [21] -1 0 0x00009400 - 0x00009407 (0x8) IX[B] [22] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] [23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [24] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [25] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.8.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "fglrx" (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 6.8.0, module version = 8.18.6 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) ATI Radeon/FireGL: The following chipsets are supported: RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967), MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66), RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960), RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964), MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63), FireGL 8800 (R200 5148), RADEON 8500 (R200 514C), RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242), RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151), RADEON 9600 PRO (RV360 4152), MOBILITY RADEON 9600/9700 (M10/M11 4E50), MOBILITY RADEON 9550 (M12 4E56), RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153), FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B), MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60), RADEON X600 (RV380 5B62), FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65), MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464), RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54), MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152), MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48), RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A), RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C), FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E), RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548), RADEON X800 PRO (R423 5549), RADEON X800 XT Platinum Edition (R423 554A), RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57), FireGL V7100 (R423 5550), FireGL V5100 (R423 5551), MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49), RADEON X800 XL (R430 554D), RADEON X800 (R430 554F), RADEON X850 XT Platinum Edition (R480 5D4D), RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52), MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B), FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49), RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D), RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652), MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL, RADEON 9100 IGP (RS300 5834), RADEON 9000 PRO/9100 PRO IGP (RS350 7834), MOBILITY RADEON 9000/9100 IGP (RS300M 5835), RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42), RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955), RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975), RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62), FireGL (R520 7105), RADEON X900 (R520 7109) (II) Primary Device is: PCI 02:00:0 (II) ATI Proprietary Linux Driver Version Identifier:8.18.6 (II) ATI Proprietary Linux Driver Release Identifier: LGDr8.18g1 (II) ATI Proprietary Linux Driver Build Date: Oct 11 2005 11:03:09 (II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.18.1-driver-lnx-218592 (WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found (--) Chipset RADEON 9500 PRO/9700 (R300 4E45) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe7004000 - 0xe7007fff (0x4000) MX[B] [6] -1 0 0xe7009000 - 0xe70097ff (0x800) MX[B] [7] -1 0 0xe700a000 - 0xe700a0ff (0x100) MX[B] [8] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B] [9] -1 0 0xe7008000 - 0xe70087ff (0x800) MX[B] [10] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B] [11] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B] [12] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B] [13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B) [15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [16] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B) [17] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] [21] -1 0 0x00009400 - 0x00009407 (0x8) IX[B] [22] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] [23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [24] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [25] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B](B) (II) fglrx(0): pEnt->device->identifier=0x821f7f0 (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe7004000 - 0xe7007fff (0x4000) MX[B] [6] -1 0 0xe7009000 - 0xe70097ff (0x800) MX[B] [7] -1 0 0xe700a000 - 0xe700a0ff (0x100) MX[B] [8] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B] [9] -1 0 0xe7008000 - 0xe70087ff (0x800) MX[B] [10] -1 0 0xe8004000 - 0xe80040ff (0x100) MX[B] [11] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B] [12] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B] [13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [14] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B) [15] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) [16] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B) [17] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [23] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] [24] -1 0 0x00009400 - 0x00009407 (0x8) IX[B] [25] -1 0 0x00009000 - 0x0000901f (0x20) IX[B] [26] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [27] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [28] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B](B) [29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) fglrx(0): === [R200PreInit] === begin, [s] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): PCI bus 2 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "NoAccel" "no" (**) fglrx(0): Option "NoDRI" "no" (**) fglrx(0): Option "Capabilities" "0x00000000" (**) fglrx(0): Option "CapabilitiesEx" "0x00000000" (**) fglrx(0): Option "GammaCorrectionI" "0x00000000" (**) fglrx(0): Option "GammaCorrectionII" "0x00000000" (**) fglrx(0): Option "OpenGLOverlay" "off" (**) fglrx(0): Option "VideoOverlay" "on" (**) fglrx(0): Option "DesktopSetup" "(null)" (**) fglrx(0): Option "ScreenOverlap" "0" (**) fglrx(0): Option "UseInternalAGPGART" "yes" (**) fglrx(0): Option "Stereo" "off" (**) fglrx(0): Option "StereoSyncEnable" "1" (**) fglrx(0): Option "UseFastTLS" "2" (**) fglrx(0): Option "BlockSignalsOnLock" "on" (**) fglrx(0): Option "ForceGenericCPU" "no" (**) fglrx(0): Option "CenterMode" "off" (**) fglrx(0): Option "FSAAScale" "1" (**) fglrx(0): Option "FSAAEnable" "no" (**) fglrx(0): Option "FSAADisableGamma" "no" (**) fglrx(0): Option "FSAACustomizeMSPos" "no" (**) fglrx(0): Option "FSAAMSPosX0" "0.000000" (**) fglrx(0): Option "FSAAMSPosY0" "0.000000" (**) fglrx(0): Option "FSAAMSPosX1" "0.000000" (**) fglrx(0): Option "FSAAMSPosY1" "0.000000" (**) fglrx(0): Option "FSAAMSPosX2" "0.000000" (**) fglrx(0): Option "FSAAMSPosY2" "0.000000" (**) fglrx(0): Option "FSAAMSPosX3" "0.000000" (**) fglrx(0): Option "FSAAMSPosY3" "0.000000" (**) fglrx(0): Option "FSAAMSPosX4" "0.000000" (**) fglrx(0): Option "FSAAMSPosY4" "0.000000" (**) fglrx(0): Option "FSAAMSPosX5" "0.000000" (**) fglrx(0): Option "FSAAMSPosY5" "0.000000" (**) fglrx(0): Option "PseudoColorVisuals" "off" (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (**) fglrx(0): Gamma Correction for I is 0x00000000 (**) fglrx(0): Gamma Correction for II is 0x00000000 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (**) fglrx(0): Option "mtrr" "off" (--) fglrx(0): Chipset: "RADEON 9500 PRO/9700 (R300 4E45)" (Chipset = 0x4e45) (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002) (--) fglrx(0): board vendor info: original ATI graphics adapter (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xe5000000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 2.0 (II) fglrx(0): VESA VBE Total Mem: 131072 kB (II) fglrx(0): VESA VBE OEM: ATI R300 (II) fglrx(0): VESA VBE OEM Software Rev: 1.0 (II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: R300 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM (II) fglrx(0): AGP card detected (II) fglrx(0): board/chipset is supported by this driver (original ATI board) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): Connected Display1: CRT on primary DAC (II) fglrx(0): Display1 EDID data --------------------------- (II) fglrx(0): Manufacturer: AOC Model: a995 Serial#: 21902 (II) fglrx(0): Year: 2000 Week: 48 (II) fglrx(0): EDID Version: 1.2 (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) fglrx(0): Sync: Separate (II) fglrx(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.626 redY: 0.340 greenX: 0.288 greenY: 0.608 (II) fglrx(0): blueX: 0.148 blueY: 0.064 whiteX: 0.283 whiteY: 0.298 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 85 vid: 22913 (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 75 vid: 36737 (II) fglrx(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) fglrx(0): #6: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 157.5 MHz Image Size: 360 x 270 mm (II) fglrx(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0 (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0 (II) fglrx(0): Serial No: YESE021902 (II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 95 kHz, PixClock max 200 MHz (II) fglrx(0): Monitor name: C993 (II) fglrx(0): End of Display1 EDID data -------------------- (WW) fglrx(0): Specified desktop setup not supported: 8 (II) fglrx(0): Primary Controller - CRT on primary DAC (II) fglrx(0): Internal Desktop Setting: 0x00000004 (**) fglrx(0): Qbs disabled (==) fglrx(0): FAST_SWAP disabled (**) fglrx(0): PseudoColor visuals disabled (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (**) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total of 48 modes found for primary display. (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280) (**) fglrx(0): *Mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz (II) fglrx(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 (**) fglrx(0): Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz (II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz (II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 (**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 +hsync (**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 +hsync (**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 (**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz (II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 (**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz (II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 (**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz (II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 (**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 (**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 +hsync (**) fglrx(0): Default mode "1024x768": 113.3 MHz (scaled from 0.0 MHz), 81.4 kHz, 100.0 Hz (II) fglrx(0): Modeline "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 (**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz (II) fglrx(0): Modeline "1024x768" 100.19 1024 1088 1200 1376 768 769 772 809 (**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz (II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631 (**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 (**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz (II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 (**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz (II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 (**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz (II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 (**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz (II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 (**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (II) fglrx(0): Modeline "800x600" 29.61 800 816 896 992 600 601 604 635 +hsync (**) fglrx(0): Default mode "800x600": 84.0 MHz (scaled from 0.0 MHz), 77.2 kHz, 120.0 Hz (II) fglrx(0): Modeline "800x600" 83.95 800 856 944 1088 600 601 604 643 (**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz (II) fglrx(0): Modeline "800x600" 68.18 800 848 936 1072 600 601 604 636 (**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz (II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 (**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz (II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz (II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz (II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 (**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 (**) fglrx(0): Default mode "640x480": 72.8 MHz (scaled from 0.0 MHz), 84.3 kHz, 160.0 Hz (II) fglrx(0): Modeline "640x480" 72.85 640 680 752 864 480 481 484 527 (**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz (II) fglrx(0): Modeline "640x480" 52.41 640 680 744 848 480 481 484 515 (**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz (II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 (**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz (II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 (**) fglrx(0): Default mode "1152x864": 119.7 MHz (scaled from 0.0 MHz), 77.1 kHz, 85.0 Hz (II) fglrx(0): Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 (**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz (II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 (**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz (II) fglrx(0): Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900 (**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz (II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 (**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (II) fglrx(0): Modeline "1152x864" 64.68 1152 1208 1328 1504 864 865 868 915 +hsync (**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (II) fglrx(0): Modeline "1152x864" 58.29 1152 1200 1320 1488 864 865 868 911 +hsync (**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz (II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449 -hsync -vsync (**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525 -hsync -vsync (**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz (II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416 -hsync (**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz (II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497 -hsync (**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 600 601 602 625 -hsync (**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 600 601 605 742 -hsync (**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 480 481 482 501 -hsync (**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 480 491 493 525 -hsync (**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 400 406 407 417 -hsync -vsync (**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 400 457 459 524 -hsync -vsync (--) fglrx(0): Display dimensions: (360, 270) mm (--) fglrx(0): DPI set to (90, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (**) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (==) fglrx(0): HPV inactive (==) fglrx(0): FSAA enabled: NO (**) fglrx(0)

I decided it'd be more helpful if I post the error message. Below is what happens when I run glxgears and fgl_glxgears: [kieren@localhost ~]$ glxgears Loading required GL library /usr/lib/libGL.so.1 651 frames in 6.0 seconds = 108.500 FPS 551 frames in 5.0 seconds = 110.200 FPS 576 frames in 5.0 seconds = 115.200 FPS 576 frames in 6.0 seconds = 96.000 FPS [kieren@localhost ~]$ fgl_glxgears Using GLX_SGIX_pbuffer Loading required GL library /usr/lib/libGL.so.1 X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 142 (GLX) Minor opcode of failed request: 5 (X_GLXMakeCurrent) Serial number of failed request: 34 Current serial number in output stream: 34 [kieren@localhost ~]$ Given that my graphics card seem to be installed fine, does anyone have any suggestions why I'm still getting 100fps on glxgears, and fgl_glxgears doesn't work at all?

Thanks for the info, it worked! Or at least it seems to have worked. My screen resolution has changed to the setting I specified in fglrxconfig, however glxgears still only gets 100fps, and flg_glxgears throws up an error. Is there something I am missing?

Greetings! I have been playing with mandrake and reading these forums for a while, but this is my first retry for a few months. I have recently installed Mandriva LE2005 and am now trying to install my ATI Radeon 9500. I have followed the instructions in this thread to the letter, and all works fine until I type: "rpm -ivh --force fglrx_6_8_0-8.10.19-1.i386.rpm" (replacing the version numbers with my downloaded file name of course) However I get the "FAILED" message because I am missing file "libstdc++.so.5" and "libstdc++.so.5(GLIBCPP_3.2)" Searching through my drive, I find I have files called "libstdc++.so.6" and "libstdc++.so.6.0.3". So are these updated versions of the file that the drivers are looking for? Should I still try and get 5, or do I have to edit a line of code to point it to the newer file? Any help is appreciated. Kieren [moved from Software by spinynorman]

Thanks pmpatrick, that worked a treat. Thanks for the suggestions Ixthusdan, I'll persevere with the other site's links (even thought I have the file now) just to see if I can figure out what I was doing wrong. Most of the time I browse with Galeon. I have tried using gftp a couple of times but I haven't got to grips with it yet. Ftp has always somewhat of a foreign concept to me, but I'm sure I'll get the hang of it. I'm off to install this file now, thanks for the help. :lol:

That's exactly my problem. Every link I click on throws up an error message. How do I actually download the file? Do I click the link? Do I use an FTP? Do I have to use a special download manager? I had a quick look with one of the FTP packages in MDK, but couldn't pinpoint an exact file that looked like the correct one. Any help is appreciated - I find it very hard to believe that a task as simple as downloading can be this much harder in Linux than in WIndows.

Hi, i have been having great trouble installing ATI radeon drivers on my MDK 9.2 system. The history of my problem is HERE. Well it seems that I need to D/L and install the kernel-source appropriate for my system to get things working (or at least get closer to getting things working). I was given a link to this page to get a kernel-source but none of the mirrors seem to work. They all have error messages like "550 failed to chage directory" or "no such file or directorye". I have tried every single link. I have also tried following the URPMI setup link to the letter, but it bombs out every time. Can anyone help?

Thanks for the info, very informative. I have at least made some more progress now. I ran the URPMI from the command promp without X running, and using the "force" command it worked. I must have FUBARed the set up though, because now I get under 100fps in "glxgears". I tried a whole variety of options, but just can't get any 3D hardware acceleration. Something I didn't do however, was to download and install the kernal-source as you suggested. I payed for a login for mandrakeclub to get the download, but can't actually get anything to download. If I follow your link, I then click on "kernel-source-2.4.22-10mdk.i586.html". From there if I click on " http://www.kernel.org/" all I get is some patches. If I click on "Source RPM: kernel-2.4.22.10mdk-1-1mdk.src.rpm" I get taken to a much more promising screen, but none of the links work. If I then click on one of the "UPRMI setup" links, I get taken to a page that instructs me to copy and paste a certain command into the console while logged in as "root", which I did, but it just downloaded some mirror names and then stopped with an error message: [root@localhost root]# urpmi.addmedia -h mirrors.secsup.org_ ftp://mirrors.secsu p.org/pub/linux/mandrake/Mandrake/9.2 unable to retrieve pathname for removable medium "Installation CD 1 (x86) (cdrom 1)" unable to retrieve pathname for removable medium "Installation CD 2 (x86) (cdrom 2)" unable to retrieve pathname for removable medium "International CD (x86) (cdrom3 )" added medium mirrors.secsup.org_ examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86 ) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86 ) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.International CD (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] retrieving source hdlist (or synthesis) of "mirrors.secsup.org_"... ftp://mirrors.secsup.org/pub/linux/mandra...thesis.hdlist.c z ftp://mirrors.secsup.org/pub/linux/mandra...hesis.hdlist.cz ftp://mirrors.secsup.org/pub/linux/mandra...hesis.hdlist.cz ftp://mirrors.secsup.org/pub/linux/mandra...nthesis.hdlist1. cz ftp://mirrors.secsup.org/pub/linux/mandra...nthesis.hdlist2. cz ftp://mirrors.secsup.org/pub/linux/mandra...esis.hdlist1.cz ftp://mirrors.secsup.org/pub/linux/mandra...esis.hdlist2.cz ftp://mirrors.secsup.org/pub/linux/mandra...esis.hdlist1.cz ftp://mirrors.secsup.org/pub/linux/mandra...esis.hdlist2.cz ftp://mirrors.secsup.org/pub/linux/mandra.../base/hdlist.cz ftp://mirrors.secsup.org/pub/linux/mandra...drake/hdlist.cz ftp://mirrors.secsup.org/pub/linux/mandra...e/9.2/hdlist.cz ftp://mirrors.secsup.org/pub/linux/mandra...base/hdlist1.cz ftp://mirrors.secsup.org/pub/linux/mandra...base/hdlist2.cz ftp://mirrors.secsup.org/pub/linux/mandra...rake/hdlist1.cz ftp://mirrors.secsup.org/pub/linux/mandra...rake/hdlist2.cz ftp://mirrors.secsup.org/pub/linux/mandra.../9.2/hdlist1.cz ftp://mirrors.secsup.org/pub/linux/mandra.../9.2/hdlist2.cz retrieve of source hdlist (or synthesis) failed no hdlist file found for medium "mirrors.secsup.org_" examining synthesis file [/var/lib/urpmi/synthesis.hdlist.mirrors.secsup.org_.cz] problem reading synthesis file of medium "mirrors.secsup.org_" unable to update medium "mirrors.secsup.org_" [root@localhost root]# I'm not sure what I'm doing wrong here. Any suggestions?

No, I haven't tried to do anything manually like that, least of all delete files that I don't know what they do hehe. I'll keep trawling through forums for now I think. I can't be the first person with my hardware combo to use MDK9.2, I'm sure there's a way to get it working.

I have an ATI Radeon 9500 pro, Linux Mandrake 9.2 with XFree86 4.3.0 and Kernel 2.4.22-10mdkenterprise. I am getting extremely slow framerates in "glxgears" (280 - 320fps) and was wondering if any other ATI Radeon users could point me in the direction of a driver which may help to rectify this. I already started a thread about this problem here , but I started this one with a different title in the hope of catching the eye of a current ATI/MDK user. Any help is very much appreciated.

I've done some searching around with google "web" and "groups" but can't seem to find any other drivers. I will continue my search, but in the meantime, here is my log from GLXGEARS: [kieren@localhost kieren]$ glxgears Loading required GL library /usr/X11R6/lib/libGL.so.1.2 Xlib: extension "XFree86-DRI" missing on display ":0.0". 1434 frames in 5.0 seconds = 286.800 FPS 1560 frames in 5.0 seconds = 312.000 FPS 1460 frames in 5.0 seconds = 292.000 FPS 1480 frames in 5.0 seconds = 296.000 FPS 1560 frames in 5.0 seconds = 312.000 FPS 1460 frames in 5.0 seconds = 292.000 FPS 1540 frames in 5.0 seconds = 308.000 FPS XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 21662 requests (19121 known processed) with 0 events remaining. [kieren@localhost kieren]$ Notice the third line "XFree86-DRI" missing on display ":0.0" Could this be anything to do with my problem? After running "hardDrake" to check my configuration, it asked me if I want to enable 3D hardware acceleration and I definately picked "yes". Could this mean the problem lies with XFree86?

Not according to ATI. I downloaded the one it said matched my XFree86 version. However, on closer inspection during an attempt to redownload it, it said something about a realaudio plugin. Have ATI screwed up their link? Does anyone know of another location to get the ATI driver for my Kernel version?

Just had a stab at installing the ATI closed source drivers from here but without much success. Result: [root@localhost Downloads]# ls -l total 2824 -rw------- 1 kieren kieren 13218 Feb 22 22:29 Check.sh -rw------- 1 kieren kieren 2856011 Feb 24 19:20 fglrx-glc22-4.3.0-3.7.0.i386.rpm drwxrwxr-x 3 kieren kieren 4096 Feb 12 08:56 Macromedia Flash/ drwxrwxr-x 3 kieren kieren 4096 Feb 12 08:56 Pingus/ drwxr-xr-x 3 kieren kieren 4096 Feb 12 17:08 spacesim/ [root@localhost Downloads]# urpmi fglrx-glc22-4.3.0-3.7.0.i386.rpm unable to retrieve pathname for removable medium "Installation CD 1 (x86) (cdrom1)" unable to retrieve pathname for removable medium "Installation CD 2 (x86) (cdrom2)" unable to retrieve pathname for removable medium "International CD (x86) (cdrom3)" installing fglrx-glc22-4.3.0-3.7.0.i386.rpm Preparing... ################################################## Installation failed: file /usr/X11R6/lib/libGL.so.1.2 from install of fglrx-glc22-4.3.0-3.7.0 conflicts with file from package libxfree86-4.3-24.4.92mdk [root@localhost Downloads]# Any ideas why it's talking about pathnames for the installation CDs? Should I put any of them in the drive during install?

[kieren@localhost kieren]$ cat /proc/version Linux version 2.4.22-10mdkenterprise (nplanel@no.mandrakesoft.com) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 SMP Thu Sep 18 11:46:49 CEST 2003 [kieren@localhost kieren]$ So which is the kernel version? "Linux version" or "gcc version"?

Sorry for my newbieness, but how do I find out the exact kernel? What I meant about the disks was, I'm going to burn the system disks before installing the ATI drivers incase I FUBAR my boot sequence or something. I don't want to do too much without having the ability to reinstall LILO.