manmath sahu

June 27, 2009

Solved:

I commented out CRDA_DOMAIN=US in /etc/sysconfig/network and that error message is gone forever.

[root@localhost manmath]# nano /etc/sysconfig/network

NETWORKING=yes

#CRDA_DOMAIN=US

May 22, 2009

Below is the list of services I have keep on. I don't use wifi and printers. I use US-English. I have never run into any problem. I am using Mandriva 2009.1 on a notebook.

acpid

alsa

cpufreq

crond

dm

haldaemon

laptop-mode

messagebus

netfs

network

network-up

preload

sound

syslog

udev-post

May 7, 2009

I dont think you can get rid of that error unless you buy a wireless cards whose driver supports nl80211 but it is a harmless error...

thanks.

May 6, 2009

Mandy 2009.1 seems me the best release ever. So far I have not faced a single problem. Wireless, bluetooth and almost any device work flawlessly. But I see this error message during shutdown.

Configuring wireless regulatory domain nl80211 not found. [FAILED]

Plz suggest me how to get rid of this annoying message.

July 24, 2008

You should only have to run 'alsactl store' once: After you have adjusted everything and have working sound, then (as root) run
alsactl store
Then 'alsactl restore' will (should) be automatically run at each boot by your system.

Thanks Greg, your trick worked.

July 24, 2008

.... run ESD, this is sound server for Gnome.

Thanks Lex!

I will run ESD, but how? what is command i have to put on the console? or something like that.

July 24, 2008

alsa daemon is running at startup. i had did that "alsactl restore", is "alsactl store" different?

do you mean on facing no sound issues i have to first do "alsactl restore" followed by "alsactl store"?

please clarify.

thanks a ton for your reply.

July 24, 2008

It's everything OK for now. I am enjoying computing on top of Mandriva.

sorry to drag your attention.

the same problem started again - whenever i do "alsactl restore" the sound comes back. but on reboot the problem of "no sound" comes again. so i have to do "alsactl restore" each time after booting my notebook.

please find a fix.

July 22, 2008

It's everything OK for now. I am enjoying computing on top of Mandriva.

July 21, 2008

Thank you all for your support. But I could not find a clue to what happened to my Mandy 2008, though I was of the opinion that it's the best Mandy ever. The irony as I have already mentioned is: totem and rhythmbox show that a file is playing, the seek bar (or progress bar) is moving, but there was no audio. Such a thing seems quite weird (how come this happen?).

But now it's everything in control. I reformatted by hdd and installed mandriva 2008, this time KDE flavor. And its sound is pretty good, even better than that of the proprietary driver in XP. I enjoy playing DVDs and MP3s. The only disappointment is that I could not find the cause of that "no sound" problem and I am missing GNOME. I always preferred gnome for its (relatively) light weight and responsiveness.

Was that "no sound" issue due to my messing with old repo? I did pulled in some packages from 2007.1 and PLF repo.

Was it due to removal of some apps? I had removed all the Java and Mono packages and their dependencies.

Or is it a bug of Mandriva 2008 Powerpack Gnome. I had installed Gnome Desktop only.

However, all is well that end's well. And hope there would be no such issues in 2009.

Again thank you all! You are a great linux community.

July 21, 2008

Does your pulseaudio control recognise any streams when playing sound?

Mine is Mandriva 2008 Powerpack and I have never really played with pulseaudio settings. Would you please tell me how can I know whether my pulseaudio control recognizes any streams when playing sound.

Thanks for your reply.

July 21, 2008

I feel the same as David, that a MUTE is the possible problem.

Just my 10cents (American or Australian. Almost the same now :lol2: )

Cheers. John.

I have checked all that buttons and keys and even the alsamixer settings. Everything is OK.

I tried that "alsctl restore" again, the sound did come. i listened one mp3 track. But after one or two reboot there was again no sound. I tried that alsactl restore, but this time it did not work at all. However, I can listen to songs and video on my windows on that same notebook. So, there is nothing wrong with sound card. Something is definitely wrong in Mandy 2008. Please check the list packages I have posted in the first post of this thread, may be my installation missing something.

Pleassssssseeee Help!

July 21, 2008

As root in a console type lsmod and make sure sound modules are loaded.

I have mentioned the results of "lsmod" at the beginning of this thread. Even now the results are same. I am really annoyed at this sound problem.

Please get me a fix.

July 20, 2008

Open Gnome-konsole and type
alsactl restore
....Lex

tried it, still no sound!

rebooted, checked, no sound!

July 20, 2008

Hi All,

Suddenly there is no sound on Mandriva 2008 Powerpack gnome. But ironically every audio and video file is playing, there are no error messages, the progress bar is moving even the video is displaying, but there is absolutely no sound. I checked the volume icon in player as well as tray, it's ok. Even the sound mixer settings are OK. I am clueless please anybody help me.

The problem started only yesterday. As much as I remember I was removing all those mono and java packages from my Mandy. I think that should not affect sound. Also the sound device is OK since I can listen to music on Windows in other partition.

Thanks in advance.

Please hurry up, this "no sound" problem is driving me nuts!

here is some info that might help you finding a fix.

results of:

"lsmod | grep sound"

soundcore 6624 1 snd

"cat /proc/asounds/card"

0 [intel ]: HDA-Intel - HDA Intel

HDA Intel at 0x52400000 irq 18

"lspci"

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)

00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)

00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)

00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)

00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)

01:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 02)

02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

"dmesg"

Linux version 2.6.22.9-laptop-1mdv (lcapitulino@n5.mandriva.com) (gcc version 4.2.2 20070909 (prerelease) (4.2.2-0.RC.1mdv2008.0)) #1 SMP Thu Sep 27 04:17:10 CEST 2007

BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000003f4d6000 (usable)

BIOS-e820: 000000003f4d6000 - 000000003f4e1000 (reserved)

BIOS-e820: 000000003f4e1000 - 000000003f52d000 (usable)

BIOS-e820: 000000003f52d000 - 000000003f530000 (reserved)

BIOS-e820: 000000003f530000 - 000000003f5bb000 (usable)

BIOS-e820: 000000003f5bb000 - 000000003f5bf000 (reserved)

BIOS-e820: 000000003f5bf000 - 000000003f67c000 (usable)

BIOS-e820: 000000003f67c000 - 000000003f6bf000 (ACPI NVS)

BIOS-e820: 000000003f6bf000 - 000000003f700000 (ACPI data)

BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)

BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)

BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)

BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)

BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

118MB HIGHMEM available.

896MB LOWMEM available.

found SMP MP-table at 000fe270

Entering add_active_range(0, 0, 259708) 0 entries of 256 used

Zone PFN ranges:

DMA 0 -> 4096

Normal 4096 -> 229376

HighMem 229376 -> 259708

early_node_map[1] active PFN ranges

0: 0 -> 259708

On node 0 totalpages: 259708

DMA zone: 32 pages used for memmap

DMA zone: 0 pages reserved

DMA zone: 4064 pages, LIFO batch:0

Normal zone: 1760 pages used for memmap

Normal zone: 223520 pages, LIFO batch:31

HighMem zone: 236 pages used for memmap

HighMem zone: 30096 pages, LIFO batch:7

DMI 2.4 present.

ACPI: RSDP 000FE020, 0024 (r2 HP )

ACPI: XSDT 3F6FE120, 006C (r1 HPQOEM SLIC-MPC 1 1000013)

ACPI: FACP 3F6FD000, 00F4 (r4 HP SPARTAN 1 LOHR 0)

ACPI: DSDT 3F6F5000, 7E50 (r1 HP SPARTAN 1 LOHR 0)

ACPI: FACS 3F67F000, 0040

ACPI: APIC 3F6F4000, 0068 (r2 HPQOEM SLIC-MPC 1 LOHR 0)

ACPI: HPET 3F6F3000, 0038 (r1 HPQOEM SLIC-MPC 1 LOHR 0)

ACPI: MCFG 3F6F2000, 003C (r1 HPQOEM SLIC-MPC 1 LOHR 0)

ACPI: ASF! 3F6F1000, 00A5 (r32 HPQOEM SLIC-MPC 1 LOHR 0)

ACPI: SLIC 3F6F0000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR 0)

ACPI: BOOT 3F6EF000, 0028 (r1 HPQOEM SLIC-MPC 1 LOHR 0)

ACPI: SSDT 3F6EE000, 05D7 (r1 PmRef Cpu0Cst 3001 INTL 20051117)

ACPI: SSDT 3F6ED000, 04C4 (r1 PmRef CpuPm 3000 INTL 20051117)

ACPI: PM-Timer IO Port: 0x408

ACPI: Local APIC address 0xfee00000

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

Processor #0 6:15 APIC version 20

ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)

ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])

IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23

ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

ACPI: IRQ0 used by override.

ACPI: IRQ2 used by override.

ACPI: IRQ9 used by override.

Enabling APIC mode: Flat. Using 1 I/O APICs

ACPI: HPET id: 0x8086a201 base: 0xfed00000

Using ACPI (MADT) for SMP configuration information

Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)

swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000

swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000

swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000

Built 1 zonelists. Total pages: 257680

Kernel command line: BOOT_IMAGE=linux root=/dev/sda6 splash=silent vga=788

bootsplash: silent mode.

mapped APIC to ffffd000 (fee00000)

mapped IOAPIC to ffffc000 (fec00000)

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Initializing CPU#0

PID hash table entries: 4096 (order: 12, 16384 bytes)

Detected 1729.189 MHz processor.

Console: colour dummy device 80x25

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Memory: 1024092k/1038832k available (2129k kernel code, 13484k reserved, 689k data, 280k init, 121256k highmem, 0k BadRAM)

virtual kernel memory layout:

fixmap : 0xffe16000 - 0xfffff000 (1956 kB)

pkmap : 0xff800000 - 0xffc00000 (4096 kB)

vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)

lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)

.init : 0xc03c8000 - 0xc040e000 ( 280 kB)

.data : 0xc0314767 - 0xc03c0c84 ( 689 kB)

.text : 0xc0100000 - 0xc0314767 (2129 kB)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

hpet0: 3 64-bit timers, 14318180 Hz

Calibrating delay using timer specific routine.. 3461.38 BogoMIPS (lpj=17306931)

Security Framework v1.0.0 initialized

Mount-cache hash table entries: 512

CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001

monitor/mwait feature present.

using mwait in idle threads.

CPU: L1 I cache: 32K, L1 D cache: 32K

CPU: L2 cache: 1024K

CPU: After all inits, caps: afebfbff 20100000 00000000 00003940 0000e31d 00000000 00000001

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

Compat vDSO mapped to ffffe000.

Checking 'hlt' instruction... OK.

SMP alternatives: switching to UP code

Freeing SMP alternatives: 12k freed

Early unpacking initramfs... done

Freeing initrd memory: 933k freed

ACPI: Core revision 20070126

ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

CPU0: IntelÂ® CeleronÂ® M CPU 530 @ 1.73GHz stepping 0a

Total of 1 processors activated (3461.38 BogoMIPS).

ENABLING IO-APIC IRQs

..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

Brought up 1 CPUs

Booting paravirtualized kernel on bare hardware

NET: Registered protocol family 16

ACPI: bus type pci registered

PCI: Using MMCONFIG

Setting up standard PCI resources

ACPI: EC: Look up EC in DSDT

ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62

ACPI: System BIOS is requesting _OSI(Linux)

ACPI: Please test with "acpi_osi=!Linux"

Please send dmidecode to linux-acpi@vger.kernel.org

ACPI: Interpreter enabled

ACPI: (supports S0 S3 S4 S5)

ACPI: Using IOAPIC for interrupt routing

ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62

ACPI: PCI Root Bridge [PCI0] (0000:00)

PCI: Probing PCI hardware (bus 00)

PCI: Transparent bridge - 0000:00:1e.0

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]

ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)

ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)

ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)

ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)

ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)

ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)

ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)

ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)

Linux Plug and Play Support v0.97 Â© Adam Belay

pnp: PnP ACPI init

ACPI: bus type pnp registered

pnp: PnP ACPI: found 9 devices

ACPI: ACPI bus type pnp unregistered

PnPBIOS: Disabled

PCI: Using ACPI for IRQ routing

PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

ACPI: RTC can wake from S4

pnp: 00:01: ioport range 0x164e-0x164f has been reserved

pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved

pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved

pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved

pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved

Time: tsc clocksource has been installed.

Switched to high resolution mode on CPU 0

PCI: Bridge: 0000:00:1c.0

IO window: 2000-2fff

MEM window: 51300000-523fffff

PREFETCH window: 50000000-50ffffff

PCI: Bridge: 0000:00:1e.0

IO window: 1000-1fff

MEM window: 51200000-512fffff

PREFETCH window: disabled.

ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 18 (level, low) -> IRQ 16

PCI: Setting latency timer of device 0000:00:1c.0 to 64

PCI: Setting latency timer of device 0000:00:1e.0 to 64

NET: Registered protocol family 2

IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

TCP established hash table entries: 131072 (order: 8, 1572864 bytes)

TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

TCP: Hash tables configured (established 131072 bind 65536)

TCP reno registered

Simple Boot Flag value 0x5 read from CMOS RAM was invalid

Simple Boot Flag at 0x44 set to 0x1

apm: BIOS not found.

audit: initializing netlink socket (disabled)

audit(1216565133.670:1): initialized

highmem bounce pool size: 64 pages

Total HugeTLB memory allocated, 0

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered (default)

Boot video device is 0000:00:02.0

PCI: Setting latency timer of device 0000:00:1c.0 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:1c.0:pcie00]

Allocate Port Service[0000:00:1c.0:pcie02]

Allocate Port Service[0000:00:1c.0:pcie03]

vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 3750k, total 7616k

vesafb: mode is 800x600x16, linelength=1600, pages=6

vesafb: protected mode interface info at 00ff:44f0

vesafb: scrolling: redraw

vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 222382 bytes,<6>...found (800x600, 222334 bytes, v3).

Console: switching to colour frame buffer device 93x31

fb0: VESA VGA frame buffer device

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

hpet_resources: 0xfed00000 is busy

Generic RTC Driver v1.07

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize

PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12

serio: i8042 KBD port at 0x60,0x64 irq 1

serio: i8042 AUX port at 0x60,0x64 irq 12

mice: PS/2 mouse device common for all mice

input: AT Translated Set 2 keyboard as /class/input/input0

TCP cubic registered

NET: Registered protocol family 1

Using IPI No-Shortcut mode

BIOS EDD facility v0.16 2004-Jun-25, 1 devices found

Freeing unused kernel memory: 280k freed

SCSI subsystem initialized

libata version 2.21 loaded.

ata_piix 0000:00:1f.2: version 2.11

ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]

ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 17 (level, low) -> IRQ 17

PCI: Setting latency timer of device 0000:00:1f.2 to 64

scsi0 : ata_piix

scsi1 : ata_piix

ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00013090 irq 14

ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00013098 irq 15

ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC7BP, max UDMA/100

ata1.00: 156301488 sectors, multi 16: LBA48

ata1.00: configured for UDMA/100

input: PS/2 Mouse as /class/input/input1

input: AlpsPS/2 ALPS GlidePoint as /class/input/input2

ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2

ata2.00: configured for MWDMA2

scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5

scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5

sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sda: sda1 sda2 < sda5 sda6 sda7 sda8 >

sd 0:0:0:0: [sda] Attached SCSI disk

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

sd 0:0:0:0: Attached scsi generic sg0 type 0

scsi 1:0:0:0: Attached scsi generic sg1 type 5

ieee80211_crypt: registered algorithm 'NULL'

sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

Uniform CD-ROM driver Revision: 3.20

sr 1:0:0:0: Attached scsi CD-ROM sr0

ieee80211: 802.11 data/management/control stack, git-1.1.13

Linux agpgart interface v0.102 Â© Dave Jones

agpgart: Detected an Intel 965GM Chipset.

agpgart: Detected 7676K stolen memory.

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

agpgart: AGP aperture is 256M @ 0x40000000

usbcore: registered new device driver usb

ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 18

PCI: Setting latency timer of device 0000:00:1b.0 to 64

USB Universal Host Controller Interface driver v3.0

8139too Fast Ethernet driver 0.9.28

ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19

PCI: Setting latency timer of device 0000:00:1d.7 to 64

ehci_hcd 0000:00:1d.7: EHCI Host Controller

ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1

ehci_hcd 0000:00:1d.7: debug port 1

PCI: cache line size of 32 is not supported by device 0000:00:1d.7

ehci_hcd 0000:00:1d.7: irq 19, io mem 0x52404000

ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 6 ports detected

ACPI: PCI Interrupt 0000:00:1d.0[D] -> GSI 21 (level, low) -> IRQ 20

PCI: Setting latency timer of device 0000:00:1d.0 to 64

uhci_hcd 0000:00:1d.0: UHCI Host Controller

uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003060

usb usb2: configuration #1 chosen from 1 choice

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 20 (level, low) -> IRQ 21

PCI: Setting latency timer of device 0000:00:1d.1 to 64

uhci_hcd 0000:00:1d.1: UHCI Host Controller

uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3

uhci_hcd 0000:00:1d.1: irq 21, io base 0x00003040

usb usb3: configuration #1 chosen from 1 choice

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 22

PCI: Setting latency timer of device 0000:02:01.0 to 64

eth0: RealTek RTL8139 at 0xf8e5c000, 00:1b:38:7b:06:c8, IRQ 22

eth0: Identified 8139 chip type 'RTL-8100B/8139D'

ACPI: PCI Interrupt 0000:00:1f.3[D] -> GSI 19 (level, low) -> IRQ 23

ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 23

PCI: Setting latency timer of device 0000:00:1d.2 to 64

uhci_hcd 0000:00:1d.2: UHCI Host Controller

uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4

uhci_hcd 0000:00:1d.2: irq 23, io base 0x00003020

usb usb4: configuration #1 chosen from 1 choice

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 2 ports detected

8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)

usb 1-5: new high speed USB device using ehci_hcd and address 2

udev: renamed network interface eth0 to eth1

usb 1-5: configuration #1 chosen from 1 choice

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

Initializing USB Mass Storage driver...

scsi2 : SCSI emulation for USB Mass Storage devices

usb-storage: device found at 2

usb-storage: waiting for device to settle before scanning

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

Non-volatile memory driver v1.2

floppy0: no floppy controllers found

device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com

EXT3 FS on sda6, internal journal

scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS

sd 2:0:0:0: [sdb] Attached SCSI removable disk

sd 2:0:0:0: Attached scsi generic sg2 type 0

usb-storage: device scan complete

Adding 489940k swap on /dev/sda7. Priority:-1 extents:1 across:489940k

kjournald starting. Commit interval 5 seconds

EXT3 FS on sda8, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

fuse init (API version 7.8)

loop: module loaded

ACPI: AC Adapter [AC] (on-line)

ACPI: Battery Slot [bAT0] (battery present)

No dock devices found.

input: Power Button (FF) as /class/input/input3

ACPI: Power Button (FF) [PWRF]

input: Power Button (CM) as /class/input/input4

ACPI: Power Button (CM) [PWRB]

input: Lid Switch as /class/input/input5

ACPI: Lid Switch [LID0]

input: Sleep Button (CM) as /class/input/input6

ACPI: Sleep Button (CM) [sLPB]

Monitor-Mwait will be used to enter C-1 state

Monitor-Mwait will be used to enter C-2 state

Monitor-Mwait will be used to enter C-3 state

ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])

ACPI: Processor [CPU0] (supports 8 throttling states)

ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]

Marking TSC unstable due to: possible TSC halt in C2.

Time: hpet clocksource has been installed.

ACPI: Thermal Zone [TZ01] (55 C)

ACPI: Video Device [OVGA_PCI0] (multi-head: yes rom: no post: no)

NET: Registered protocol family 10

lo: Disabled Privacy Extensions

Mobile IPv6

NET: Registered protocol family 17

eth1: link up, 100Mbps, full-duplex, lpa 0x45E1

Clocksource tsc unstable (delta = -202270294 ns)