erniev

Silver Surfer I thank you for your continued support - I am really puzzled (not that it takes much)as I did have this system running successfully with the wireless card on a earlier version of Mandriva (2007 I think it was). I visited the Belkin site and the driver download appears be a one size fits all for XP and Win 98. I have found a ArchWiki page on Broadcom 4312 - 43xx cards. when i enter the command lspci| grep BCM43 I get confirmation that the network controller is BCM4306 - which does not appear to be covered by this wiki page but suggests a web site where I may find the b43 driver....my next stop. If you don't mind I may come back to you for assistance.. Regards to you erniev

Thank you K Bergen, I carried out as suggested get i586 in the top line. I thought so but it is good to confirm this. Thanking you ev

I'm sure I installed 32 bit Mandriva - is there a way I can confirm this? ev

SiverSurfer Yes - it does make sense thank you - however still some difficulty I tried a number of path options to the inf file for the ndiswrapper -e but always got the message "No such file or directory exists" however when I tried it with ndiswrapper -i with the same path ( /home/ev/WiFi/bcmwl5a.inf) I get the message already installed. So it reconises the path (I am assuming) for the install command but not for the -e command. However I am sure there is something I am not doing - Thankyou ev

Thank you - the result from ndiswrapper - l : bcmlw5 driver installed device (14E4:4320) present (alternate driver ssb) bcmlw5a driver installed device (14E4:4320) present (alternate driver ssb) I'm reading this as the driver and the device are identified ...but for some reason I cannot get them working together to give me internet access. Is there anything else I can do? thank you ev

Yes I have tried using ndiswrapper and pointing it to the location of the xp drivers but get various messages: Unable to find the ndiswrapper interface... Unable to find network interface for selected device (using (ndiswrapper) The card I have is F5D7001 uk - I welcome any further suggestion Thank you ev

I bought a copy of Powerpack 2010 but have failed to get wireless connectivity. The card I am currently using is a Belkin Wirless G Desktop Network card - and I have now given up trying to get it working. Can anyone suggest a wireless card that they know to work with Powerpack 2010? Thank you, erniev

Thank you Ian,

I have purchased the 2010 Powerpack and will install on a 70gig hard drive with XP. I got a little confused with the installation and may have made a wrong entry somewhere - the installation is not yet complete... I can resize my hard drive giving approx half to XP and half to Mandriva. I had previously used Mandrive and it had set up the directories automatically but for some reason I am asked to set up the directories individually. Can you advise what directories I need to get started and how much space to allocate.... or would I be better cancelling the installation and starting from the beginning again? Thanks ernie

to being with I am very much a know nothing newbie I had Mandriva 2007 running and could connect through Wifi - I have just upgraded to Mandriva One 2009 and when I bring up the Network Centre the wifi network is not showing - indeed there are no wifi networks coming up in the select network window....is there something I should be doing - with 07 I just clicked on my wifi network entered the password and gained entry ...but now nothing. Any help will be appreciated. Thank you ev

Thanks to everyone who has contributed tho this thread - I now have Rythmnbox running as needed - files savesd as MP3 and can drag them to my mp3 player. Without your help I would still be bumbling about in the dark. Ernie

Adam, Thank you - following your instruction I have Rhythmbox running and picking up the MP3 player - what I have not been able to do is transcdeo songs on the fly with Rhythmbox (I have installed gstreamer0.10 lame) - how do I do this? Thanks again ernie

Thank you - here is the output.... [ev@localhost ~]$ dmesg | tail -n 15 sda: rw=0, want=4294967292, limit=15319040 attempt to access beyond end of device sda: rw=0, want=4294967292, limit=15319040 attempt to access beyond end of device sda: rw=0, want=4294967228, limit=15319040 attempt to access beyond end of device sda: rw=0, want=4294967232, limit=15319040 attempt to access beyond end of device sda: rw=0, want=4294967284, limit=15319040 attempt to access beyond end of device sda: rw=0, want=4294967288, limit=15319040 attempt to access beyond end of device sda: rw=0, want=4294967292, limit=15319040 attempt to access beyond end of device sda: rw=0, want=4294967292, limit=15319040

Thanks to everyone who helped my previous post on installing LAME to hep with creating mp3 files. Now If I could ask another question - having created some mp3 files - how do I now copy them to my mp3 player. I get as far as connecting the USB cable but then I am lost - I cannot find the mp3 player on the desktop and my Linux knowledge is such that I would not know where to look in the folders. Is there something I should be doing that will allow me to view the mp3 players and copy files to it? My mp3 player is a Sopny Walkman NWZ-A818 Thank you ernie [moved from Software by Greg2]

David, Thank you that sorted my problem - Now If I could ask another question - having created some mp3 files - how do I now copy them to my mp3 player. I get as far as connecting the USB cable but then I am lost - I cannot find the mp3 player on the desktop and my Linux knowledge is such that I would not know where to look in the folders. Is there something I should be doing that will allow me to view the mp3 players and copy files to it? My mp3 player is a Sopny Walkman NWZ-A818 I will submit this new request as a new topic Thank you ernie

Thank you pmpatrick, I went to easy-urpmi - and the plf section - but to be honest I'm lost - tried mcc but could not find any thing to do with lame .... I am sure I am not doing something that should be done but what it is I do not know.

I have read a few posts on MP3 format and the need for Lame - when using KaudioCreator to create MP3 files - I was unsuccessful and had a pop up message referring to LAME - could some one advise how I find/install LAME? thank you erniev

Than you everyone who has helped me to regain sound, I have followed the suggestions above - which gave me sound on the interrnet - and by adjusting the eslider control in KMix for VIA 8235 have now sound with CD players. Without your assistance I would still be bumbling around in the dark....one more questions..what is the best way to increase my system knowledge ... Regards ernie

John, Again thank you for your time I tried that and still have no sound - the KSCD volume is showing a 40% - and for some reason I cannot move the slide bar to increase this volume - I converted one of the tracks to Ogg Vorbis and with Amorak it play but even with my speakers on full volume it is just audible. The info below I tried in response to an earlier suggestion - it appears I do not have also set up....I am right in thinking this ....where do I go from hear... [root@localhost erniev]# urpmi alsaconf alsa-utils alsa-plugins no package named alsaconf no package named alsa-plugins [root@localhost erniev]# Regards, ernie

John, Thank you - I followed your insturctions and now I have sound when listineing to radio on the internet - but not if I try to play a CD? Questions - what would I have done to shut off the sound in the first place and what must I know do to get sound when playing CD's? Regards to you ernie Scarecrow, here is the output from your suggestion... [root@localhost erniev]# urpmi alsaconf alsa-utils alsa-plugins no package named alsaconf no package named alsa-plugins [root@localhost erniev]# Regards, ernie

Thanks you for the suggestions here is the result of trying alsaconf - am I getting something wrong here??? Further suggestions gratefully received.. [root@localhost erniev]# alsaconf bash: alsaconf: command not found [root@localhost erniev]# aslactlstore bash: aslactlstore: command not found [root@localhost erniev]# aslactl store bash: aslactl: command not found I had a look at Kmix but do not have the VIA8235 option - as shown on your example I checked Kmix help for hardwars used and Sound drivers supported: ALSA + OSS Sound drivers used: ALSA however from a previous suggestion I tried as root alfaconf and got the following [root@localhost erniev]# alsaconf bash: alsaconf: command not found [root@localhost erniev]# aslactlstore bash: aslactlstore: command not found [root@localhost erniev]# aslactl store

Yes the sound was working well initially,----- lspci -v |grep Sound - no response **** List of PLAYBACK Hardware Devices **** card 0: V8235 [VIA 8235], device 0: VIA 8235 [VIA 8235] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 card 0: V8235 [VIA 8235], device 1: VIA 8235 [VIA 8235] Subdevices: 1/1 Subdevice #0: subdevice #0

Jimtim, thank you for the suggestion - and yes the amorak icon was in the tool bar - I quit as you suggested, mno sound - restarted the system and still no sound.....

Hi, I have Mandriva 2007 (free) installed all was going well but now have lost all sound - I am very much a newbie so any suggestions on how to get the sound back would be very welcome. Regards, ernie [moved from Installing Mandriva by spinynorman]

Yes - thank you - now working