Jump to content

chris-tux

Members
 View Profile  See their activity

  • Posts

    86

  • Joined

  • Last visited

 Content Type 

Posts posted by chris-tux

  2. Activation of eth0 failed at boot

    in Networking

    Posted

    a little progress, I changed in /etc/sysconfig/network-scripts/ifcfg-eth0

    MII_NOT_SUPPORTED=no in MII_NOT_SUPPORTED=yes

    (I believe ifplugd is not run)

    then, at boot, the activation of eth0 is OK.

    There is still something strange: in mcc, my lan is known as non connected however everything seems to be working all right :unsure:

  4. Activation of eth0 failed at boot

    in Networking

    Posted · Edited by chris-tux

    I always have FAILED when it goes to the initiallisation of my networking card [02:05.0 Ethernet controller: 3Com Corporation 3c940 1000Base? (rev 12)] but I have full access to the Internet and my LAN is working all right.

    Has anyone solved this ?

    TIA

    Chris

    OOUPS, I think it is the same problem as in this topic

  7. Power down

    in Hardware

    Posted

    Do you mean in /etc/lilo.conf ?

    Here is mine

    [chris@tuxedo chris]$ cat /etc/lilo.conf

    # File generated by DrakX/drakboot

    # WARNING: do not forget to run lilo after modifying this file

     

    boot=/dev/hda

    map=/boot/map

    default="linux-smp"

    keytable=/boot/fr-latin1.klt

    prompt

    nowarn

    timeout=100

    message=/boot/message

    menu-scheme=wb:bw:wb:bw

    image=/boot/vmlinuz

    label="linux"

    root=/dev/hda1

    initrd=/boot/initrd.img

    append="devfs=mount acpi=ht splash=silent"

    vga=788

    read-only

    image=/boot/vmlinuz

    label="linux-nonfb"

    root=/dev/hda1

    initrd=/boot/initrd.img

    append="devfs=mount acpi=ht"

    read-only

    image=/boot/vmlinuz-2.6.3-7mdk

    label="263-7"

    root=/dev/hda1

    initrd=/boot/initrd-2.6.3-7mdk.img

    append="devfs=mount acpi=ht splash=silent"

    read-only

    image=/boot/vmlinuz-smp

    label="linux-smp"

    root=/dev/hda1

    initrd=/boot/initrd-smp.img

    append="devfs=mount acpi=ht splash=silent"

    read-only

    image=/boot/vmlinuz

    label="failsafe"

    root=/dev/hda1

    initrd=/boot/initrd.img

    append="failsafe acpi=ht devfs=nomount"

    read-only

    other=/dev/fd0

    label="floppy"

    unsafe

     

    acpi=ht seems to be ok ?

  8. Power down

    in Hardware

    Posted · Edited by chris-tux

    Hi all,

    When I logout, I had usually an automatic shutdown but now I have to manually power off (mdk10 OE)

    How do I settle this ?

    tia

    chris

  14. Mandrake 10.0 Official and PS/2 Mouse

    in Hardware

    Posted

    hi all,

    I have nearly the same problem with 10.0 OE. I can't use my standart PS/2 mouse (right button and wheel from time to time) that was working properly under 9.2. With mousedrake, I can't change the default choice "universal mouse".

    Can anybody summarize the solution since there is many propositions in this thread ?

    TIA

    chris

  16. mdk 10 & ethernet init

    in Installing Mandriva

    Posted

    thanks for your help, gowator

    on mdk 10.0, if config -a gave me

    eth0 Lien encap:Ethernet HWaddr 00:0E:A6:50:20:60

    inet adr:192.168.0.20 Bcast:192.168.0.255 Masque:255.255.255.0

    adr inet6: fe80::20e:a6ff:fe50:2060/64 Scope:Lien

    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

    RX packets:3 errors:0 dropped:0 overruns:0 frame:0

    TX packets:36 errors:0 dropped:0 overruns:0 carrier:0

    collisions:0 lg file transmission:1000

    RX bytes:232 (232.0 B) TX bytes:3726 (3.6 Kb)

    Interruption:22 Mémoire:feafc000-0

     

    lo Lien encap:Boucle locale

    inet adr:127.0.0.1 Masque:255.0.0.0

    adr inet6: ::1/128 Scope:Hôte

    UP LOOPBACK RUNNING MTU:16436 Metric:1

    RX packets:140 errors:0 dropped:0 overruns:0 frame:0

    TX packets:140 errors:0 dropped:0 overruns:0 carrier:0

    collisions:0 lg file transmission:0

    RX bytes:10398 (10.1 Kb) TX bytes:10398 (10.1 Kb)

     

    sit0 Lien encap:IPv6-dans-IPv4

    NOARP MTU:1480 Metric:1

    RX packets:0 errors:0 dropped:0 overruns:0 frame:0

    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

    collisions:0 lg file transmission:0

    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    and on mdk 9.2: eth0

    Lien encap:Ethernet HWaddr 00:50:BF:99:D7:7D

    inet adr:192.168.0.10 Bcast:192.168.0.255 Masque:255.255.255.0

    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

    RX packets:1010 errors:0 dropped:0 overruns:0 frame:0

    TX packets:739 errors:0 dropped:0 overruns:0 carrier:0

    collisions:0 lg file transmission:100

    RX bytes:693823 (677.5 Kb) TX bytes:53965 (52.7 Kb)

    Interruption:9 Adresse de base:0xcc00

     

    lo Lien encap:Boucle locale

    inet adr:127.0.0.1 Masque:255.0.0.0

    UP LOOPBACK RUNNING MTU:16436 Metric:1

    RX packets:2400 errors:0 dropped:0 overruns:0 frame:0

    TX packets:2400 errors:0 dropped:0 overruns:0 carrier:0

    collisions:0 lg file transmission:0

    RX bytes:701896 (685.4 Kb) TX bytes:701896 (685.4 Kb)

     

    but no ppp connection, I am still in the fog...

    chris

  17. mdk 10 & ethernet init

    in Installing Mandriva

    Posted

    I move from 9.2 to 10.0 on another desktop with another lan card (which semms to be very well recognized). Everything worked fine with 9.2 but now with 10.0 , during boot process eth0 initialization process answers always failed. I have a netgear router with an ADSL modem with mdk 9.2 (static IP), mdk 10.0 (static IP), 3 desktop with XP (dynamic IP with DHCP). /etc/hosts and /etc/resolv.conf seems ok for me and when I open mcc and go in the internet menu, there is type of connection: LAN but always not connected. However I can surf without any problem!

    I suspect that during installation, mdk 10 has initialized another connection ? but can't manage to solve my problem.

  19. Installing Mandrake and Gentoo

    in Installing Mandriva

    Posted

    hi all,

    I have mdk 9.2 running with lilo (waiting for switching to mdk 10.0 because mdk 10.0 ce upgrade says my hda partition is wrong and wants to perform its own partionning..arggh...).

    My question is who can give advices on how installing gentoo leaving mdk as it is and switching from one to one with lilo ?

    Basic question, I'm afraid but I don't want to fire out what's working fine :unsure:

     

    TIA

    chris

  20. first kernel compilation

    in Hardware

    Posted

    hi all,

    I am trying for the first time to compile my kernel. I read and followed the FAQ KC01 by aru but I am stopped at that line

    cp /usr/src/linux/config /boot/config-VERSION

    I have no config file in /usr/src/linux

    Moreover I am not sure to have well understanden the command mkinitrd :unsure:

    Any explanations welcome !

  24. BITTORRENT

    in Software

    Posted

    ok, this

    python btdownloadheadless.py --max_upload_rate 10 --url http://213.232.94.77/test/pclinuxos-1.20.04.iso.torrent

    or this

     btdownloadcurses.py --max_upload_rate 10 --url http://213.232.94.77/test/pclinuxos-1.20.04.iso.torrent

    works fine.

    BUT, if you dl the .torrent file "pclinuxos-1.20.04.iso.torrent" from http://213.232.94.77

    and then

    btdownloadcurses.py --max_upload_rate 10 pclinuxos-1.20.04.iso.torrent

    there is a problem

    however

    btdownloadcurses.py pclinuxos-1.20.04.iso.torrent

    is still working fine !!!

  25. BITTORRENT

    in Software

    Posted

    still something is annoying me

    this

    [chris@tux incoming]$ btdownloadcurses.py mmove.torrent

    is working. A nice window opens, and the file is saved in the dir incoming :D

    but this

     [chris@tux incoming]$ btdownloadcurses.py --max_upload_rate 10 mmove.torrent
These errors occurred during execution:
[00:02:42] error: Too many args - 0 max.
run with no args for parameter explanations

    is definitively :furious3:

×
×
  • Create New...