Jump to content

dhague30

Members
 View Profile  See their activity

  • Posts

    23

  • Joined

  • Last visited

 Content Type 

Posts posted by dhague30

  2. system freezing all the time

    in Hardware

    Posted 

    PCI devices found:

 Bus  0, device   0, function  0:

   Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 2).

     Master Capable.  Latency=32.

     Non-prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].

 Bus  0, device   0, function  1:

   IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208).

     Master Capable.  Latency=16.

     I/O at 0xff00 [0xff0f].

 Bus  0, device   1, function  0:

   ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 0).

 Bus  0, device   1, function  1:

   Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 130).

     IRQ 3.

     Master Capable.  Latency=64.  Min Gnt=52.Max Lat=11.

     I/O at 0xcc00 [0xccff].

     Non-prefetchable 32 bit memory at 0xcfffb000 [0xcfffbfff].

 Bus  0, device   1, function  3:

   USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 7).

     IRQ 11.

     Master Capable.  Latency=64.  Max Lat=80.

     Non-prefetchable 32 bit memory at 0xcfffd000 [0xcfffdfff].

 Bus  0, device   1, function  2:

   USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 7).

     IRQ 11.

     Master Capable.  Latency=64.  Max Lat=80.

     Non-prefetchable 32 bit memory at 0xcfffc000 [0xcfffcfff].

 Bus  0, device   1, function  4:

   Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 2).

     IRQ 11.

     Master Capable.  Latency=64.  Min Gnt=2.Max Lat=24.

     I/O at 0xd000 [0xd0ff].

     Non-prefetchable 32 bit memory at 0xcfffe000 [0xcfffefff].

 Bus  0, device   1, function  6:

   Modem: Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link HAMR5600 compatible) (rev 160).

     IRQ 3.

     Master Capable.  Latency=64.  Min Gnt=52.Max Lat=11.

     I/O at 0xd800 [0xd8ff].

     I/O at 0xd400 [0xd47f].

 Bus  0, device   2, function  0:

   PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).

     Master Capable.  No bursts.  Min Gnt=14.

 Bus  1, device   0, function  0:

   VGA compatible controller: nVidia Corporation NV1x (rev 163).

     IRQ 5.

     Master Capable.  Latency=64.  Min Gnt=5.Max Lat=1.

     Non-prefetchable 32 bit memory at 0xce000000 [0xceffffff].

     Prefetchable 32 bit memory at 0xc0000000 [0xc7ffffff].

     Prefetchable 32 bit memory at 0xcdc80000 [0xcdcfffff].

     

    sorry about the delay in the posting....

  3. system freezing all the time

    in Hardware

    Posted

    i dont know how much will be able to be solved on this board, but what the hey.

     

    ever since i went completely linux instead of half windows/linux partitions my computer has been being really slow, and many times it freezes hard (no mouse movement even). i tried reinstalling mandrake, this time putting fewer packages on that I didnt use. i even went back to 9.0 from 9.1. However, the problem persists. Any suggestions?

     

    Note: i have a 1.2 Ghz processor, 256MB RAM, and a 128MB vid card, so hardware shouldnt be my problem i dont think.

     

    thanks

    dave

  10. cd roms wont recognize after k3b setup

    in Software

    Posted

    im not sure if i do or not, but i found that file, so im guessing yes

     

    boot=/dev/hda

    map=/boot/map

    default="linux"

    keytable=/boot/us.klt

    prompt

    nowarn

    timeout=100

    message=/boot/message

    menu-scheme=wb:bw:wb:bw

    image=/boot/vmlinuz

    label="linux"

    root=/dev/hda1

    initrd=/boot/initrd.img

    append="devfs=mount hdd=ide-scsi acpi=off quiet"

    vga=788

    read-only

    image=/boot/vmlinuz

    label="linux-nonfb"

    root=/dev/hda1

    initrd=/boot/initrd.img

    append="devfs=mount hdd=ide-scsi acpi=off"

    read-only

    image=/boot/vmlinuz

    label="failsafe"

    root=/dev/hda1

    initrd=/boot/initrd.img

    append="devfs=nomount hdd=ide-scsi acpi=off failsafe"

    read-only

    other=/dev/fd0

    label="floppy"

    unsafe

  11. cd roms wont recognize after k3b setup

    in Software

    Posted

    this was also in there when i was looking for my /etc/fstab

     

    it was entitled /etc/fstab.k3bsetup

     

     

    /dev/hda1 / ext3 defaults 1 1

    none /dev/pts devpts mode=0620 0 0

    /dev/hda6 /home ext3 defaults 1 2

    none /mnt/cdrom supermount dev=/dev/hdc,fs=auto,ro,--,iocharset=iso8859-1,codepage=850,umask=0 0 0

    none /mnt/cdrom2 supermount dev=/dev/scd0,fs=auto,ro,--,iocharset=iso8859-1,codepage=850,umask=0 0 0

    none /mnt/floppy supermount dev=/dev/fd0,fs=auto,--,iocharset=iso8859-1,sync,codepage=850,umask=0 0 0

    none /proc proc defaults 0 0

    /dev/hda5 swap swap defaults 0 0

    /dev/ide/host0/bus1/target0/lun0/cd /mnt/cdrom auto ro,noauto,user,exec 0 0

    /dev/scsi/host0/bus0/target0/lun0/cd /mnt/cdrecorder auto ro,noauto,user,exec 0 0

  12. cd roms wont recognize after k3b setup

    in Software

    Posted

    sure, here it is

     

    /dev/hda1 / ext3 defaults 1 1

    none /dev/pts devpts mode=0620 0 0

    /dev/hda6 /home ext3 defaults 1 2

    none /mnt/cdrom supermount dev=/dev/hdc,fs=auto,ro,--,iocharset=iso8859-1,codepage=850,umask=0 0 0

    none /mnt/cdrom2 supermount dev=/dev/scd0,fs=auto,ro,--,iocharset=iso8859-1,codepage=850,umask=0 0 0

    none /mnt/floppy supermount dev=/dev/fd0,fs=auto,--,iocharset=iso8859-1,sync,codepage=850,umask=0 0 0

    none /proc proc defaults 0 0

    /dev/hda5 swap swap defaults 0 0

    /dev/ide/host0/bus1/target0/lun0/cd /mnt/cdrom/ auto ro,noauto,user,exec 0 0

    /dev/scsi/host0/bus0/target0/lun0/cd /mnt/cdrecorder auto ro,noauto,user,exec 0 0

     

    hope that helps

  13. cd roms wont recognize after k3b setup

    in Software

    Posted

    hello,

    i run mandrake 9.1, and i used to burn cds using k3b. recently i tried to copy a cd from my CDROM drive to my CDRW drive. it told me that i couldnt do it until i ran k3b setup. so, i went through k3b setup with (what i thought was) no problems. after that i cant get access to either my cdrom or cdrw drives. it says they are locked when i look at them in /mnt/ .... what went wrong?

  14. how to set up a joystick??

    in Hardware

    Posted

    woops... i could have swore that i put in what it was.... anyways, it is a microsoft sidewinder.... i tried all of those modprobe commands including modprobe sidewinder, and still no results.... any further suggestions?

     

    thanks

     

    [EDIT] nevermind!! that worked.... i just needed to restart the app i was testing on!! :roll: thanks!! :-D

  17. Gaim problem.... doesnt add buddies

    in Software

    Posted

    gahh!! i dont get it!! i even installed from where you got yours! ahh.... im thinkin that maybe i am still opening the wrong app..... my gaim link comes from /usr/bin/gaim ....where gaim is the name of the app.... is that where yours is from also? also, i do know how to drag, but that didnt change anything when i dragged from one to another....

  23. OpenGL problem with SIS630

    in Hardware

    Posted

    hey

    when i try to run any 3d openGL games, my system slows down very much and i get slow framerates. my card is a SiS 630. i think it may have something to do with openGL because 2D works fine, but it is 3D that has issues. what can i do to solve this problem?

     

    thanks

×
×
  • Create New...